lkml.org 
[lkml]   [2015]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 4/6] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform
From
On Tue, Nov 11, 2014 at 1:51 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tuesday 07 October 2014 17:06:47 Feng Kan wrote:
>> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>> index 2e45ae3..a03042c 100644
>> --- a/drivers/i2c/busses/Kconfig
>> +++ b/drivers/i2c/busses/Kconfig
>> @@ -1009,6 +1009,15 @@ config I2C_CROS_EC_TUNNEL
>> connected there. This will work whatever the interface used to
>> talk to the EC (SPI, I2C or LPC).
>>
>> +config I2C_XGENE_SLIMPRO
>> + tristate "APM X-Gene SoC I2C SLIMpro devices support"
>> + depends on ARCH_XGENE && XGENE_SLIMPRO_MBOX
>
> Why this dependency on XGENE_SLIMPRO_MBOX?
>
> Better replace it with a dependency on MAILBOX.
Arnd, just a question. Is this because this possibly help with future
compatibility by choosing a more broad dependency?
>
>> + } else {
>> + spin_lock_irqsave(&ctx->lock, flags);
>> + ctx->i2c_rx_poll = 1;
>> + for (count = SLIMPRO_I2C_WAIT_COUNT; count > 0; count--) {
>> + if (ctx->i2c_rx_poll == 0)
>> + break;
>> + udelay(100);
>> + }
>
> No, you can't block the CPU for an extended amount of time with
> interrupts disabled. Please kill this code.
>
>> + ctx->resp_msg = data;
>> + if (ctx->mbox_client.tx_block)
>> + init_completion(&ctx->rd_complete);
>
> reinit_completion()?
>
>> +static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr,
>> + u32 addrlen, u32 protocol, u32 readlen,
>> + u32 with_data_len, void *data)
>> +{
>> + dma_addr_t paddr;
>> + u32 msg[3];
>> + int rc;
>> +
>> + paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen,
>> + DMA_FROM_DEVICE);
>
> ctx->dev is probably the wrong device here. The i2c controller is not
> DMA capable itself, you need to have a pointer to the device that actually
> performs the DMA here.
>
>
>> + /* Request mailbox channel */
>> + cl->dev = &pdev->dev;
>> + cl->rx_callback = slimpro_i2c_rx_cb;
>> + cl->tx_done = slimpro_i2c_tx_done;
>> + cl->tx_block = true;
>> + cl->tx_tout = SLIMPRO_OP_TO_MS;
>> + cl->knows_txdone = false;
>> + cl->chan_name = "i2c-slimpro";
>> + ctx->mbox_chan = mbox_request_channel(cl);
>
> This is not the correct interface.
>
>> + rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
>> + if (rc)
>> + dev_warn(&pdev->dev, "Unable to set dma mask\n");
>
> Are you sure that this is the correct device to perform the DMA?
>
> Moreover, the mask doesn't match the usage: the slimpro_i2c_blkrd
> function passes in only the lower 32 bit of the address, which would
> be DMA_BIT_MASK(32).
>
>> +#ifdef CONFIG_OF
>> +static struct of_device_id xgene_slimpro_i2c_id[] = {
>> + {.compatible = "apm,xgene-slimpro-i2c" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids);
>> +#endif
>> +
>> +static struct platform_driver xgene_slimpro_i2c_driver = {
>> + .probe = xgene_slimpro_i2c_probe,
>> + .remove = xgene_slimpro_i2c_remove,
>> + .driver = {
>> + .name = XGENE_SLIMPRO_I2C,
>> + .owner = THIS_MODULE,
>> + .of_match_table = of_match_ptr(xgene_slimpro_i2c_id)
>> + },
>> +};
>
> The driver only supports DT, so just drop the #ifdef and the of_match_ptr().
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2015-01-09 20:01    [W:0.101 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site