lkml.org 
[lkml]   [2015]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 3/4] ASoC: tda998x: add a codec to the HDMI transmitter
On Fri, Jan 09, 2015 at 12:24:12PM +0200, Jyri Sarha wrote:
> I think that would still fail if DRM and TDA998x is built in and SND_SOC is
> built as modules. A request_module() call before tda9998x_codec_register()
> should help.

That doesn't fix the problem. If the DRM driver is built in, but the
codec is not, and the DRM driver has a reference to
tda9998x_codec_register(), then the vmlinux file will fail to link,
and you'll never get the opportunity to call request_module().

> Or could could write:
>
> select SND_SOC_TDA998X if (SND_SOC=DRM_I2C_NXP_TDA998X || SND_SOC=y)

I'm not sure that's right either.

Let's go back and think about this: why should SND_SOC_TDA998X be
*selected*. Let me put that a different way: why should this symbol
be forced on just because we're building the DRM TDA998x driver?

Would it be more sensible to make SND_SOC_TDA998X depend on
DRM_I2C_NXP_TDA998X instead, maybe with a 'default y' - which is a
kinder way to have SND_SOC_TDA998X be enabled. If SND_SOC_TDA998X
doesn't have a prompt, then it'll automatically enable itself too
this way when all its dependencies are satisfied.

IMHO "select" is a very over-used, and in many cases an evil
construct because its very hard to avoid breaking dependencies
with it.

--
FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
according to speedtest.net.


\
 
 \ /
  Last update: 2015-01-09 12:41    [W:0.124 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site