lkml.org 
[lkml]   [2015]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v7 3/5] usb: dwc2: add generic PHY framework support for dwc2 usb controler platform driver.
Date
> From: Yunzhi Li [mailto:lyz@rock-chips.com]
> Sent: Friday, December 12, 2014 7:10 AM
>
> Get PHY parameters from devicetree and power off usb PHY during
> system suspend.
>
> Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
> Acked-by: Paul Zimmerman <paulz@synopsys.com>
>
> ---
>
> Changes in v7: None
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3:
> - Fix coding style: both branches of the if() which only one
> branch of the conditional statement is a single statement
> should have braces.
> - No need to test dwc2->phy for NULL before calling generic phy
> APIs.
>
> drivers/usb/dwc2/gadget.c | 33 ++++++++++++---------------------
> drivers/usb/dwc2/platform.c | 36 ++++++++++++++++++++++++++++++++++--
> 2 files changed, 46 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index 200168e..2601c61 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -3410,8 +3410,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
> {
> struct device *dev = hsotg->dev;
> struct s3c_hsotg_plat *plat = dev->platform_data;
> - struct phy *phy;
> - struct usb_phy *uphy;
> struct s3c_hsotg_ep *eps;
> int epnum;
> int ret;
> @@ -3421,30 +3419,23 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
> hsotg->phyif = GUSBCFG_PHYIF16;
>
> /*
> - * Attempt to find a generic PHY, then look for an old style
> - * USB PHY, finally fall back to pdata
> + * If platform probe couldn't find a generic PHY or an old style
> + * USB PHY, fall back to pdata
> */
> - phy = devm_phy_get(dev, "usb2-phy");
> - if (IS_ERR(phy)) {
> - uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> - if (IS_ERR(uphy)) {
> - /* Fallback for pdata */
> - plat = dev_get_platdata(dev);
> - if (!plat) {
> - dev_err(dev,
> - "no platform data or transceiver defined\n");
> - return -EPROBE_DEFER;
> - }
> - hsotg->plat = plat;
> - } else
> - hsotg->uphy = uphy;
> - } else {
> - hsotg->phy = phy;
> + if (IS_ERR_OR_NULL(hsotg->phy) && IS_ERR_OR_NULL(hsotg->uphy)) {
> + plat = dev_get_platdata(dev);
> + if (!plat) {
> + dev_err(dev,
> + "no platform data or transceiver defined\n");
> + return -EPROBE_DEFER;

Hi Yunzhi,

Testing Felipe's testing/next branch on an Altera SOCFPGA platform,
the driver never loads because it always returns -EPROBE_DEFER here.
Apparently the SOCFPGA platform does not have any platform data
defined, because dev_get_platdata() always returns NULL.

If I remove the -EPROBE_DEFER return and have it continue on, the
driver works. Reverting the patch also makes it work.

I am testing with the driver built-in. I haven't tried it as a module
yet.

Any ideas? Is the -EPROBE_DEFER return really needed here?

--
Paul

> + }
> + hsotg->plat = plat;
> + } else if (hsotg->phy) {
> /*
> * If using the generic PHY framework, check if the PHY bus
> * width is 8-bit and set the phyif appropriately.
> */
> - if (phy_get_bus_width(phy) == 8)
> + if (phy_get_bus_width(hsotg->phy) == 8)
> hsotg->phyif = GUSBCFG_PHYIF8;
> }
>
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index 6a795aa..ae095f0 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -155,6 +155,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
> struct dwc2_core_params defparams;
> struct dwc2_hsotg *hsotg;
> struct resource *res;
> + struct phy *phy;
> + struct usb_phy *uphy;
> int retval;
> int irq;
>
> @@ -212,6 +214,24 @@ static int dwc2_driver_probe(struct platform_device *dev)
>
> hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
>
> + /*
> + * Attempt to find a generic PHY, then look for an old style
> + * USB PHY
> + */
> + phy = devm_phy_get(&dev->dev, "usb2-phy");
> + if (IS_ERR(phy)) {
> + hsotg->phy = NULL;
> + uphy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
> + if (IS_ERR(uphy))
> + hsotg->uphy = NULL;
> + else
> + hsotg->uphy = uphy;
> + } else {
> + hsotg->phy = phy;
> + phy_power_on(hsotg->phy);
> + phy_init(hsotg->phy);
> + }
> +
> spin_lock_init(&hsotg->lock);
> mutex_init(&hsotg->init_mutex);
> retval = dwc2_gadget_init(hsotg, irq);
> @@ -231,8 +251,15 @@ static int __maybe_unused dwc2_suspend(struct device *dev)
> struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
> int ret = 0;
>
> - if (dwc2_is_device_mode(dwc2))
> + if (dwc2_is_device_mode(dwc2)) {
> ret = s3c_hsotg_suspend(dwc2);
> + } else {
> + if (dwc2->lx_state == DWC2_L0)
> + return 0;
> + phy_exit(dwc2->phy);
> + phy_power_off(dwc2->phy);
> +
> + }
> return ret;
> }
>
> @@ -241,8 +268,13 @@ static int __maybe_unused dwc2_resume(struct device *dev)
> struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
> int ret = 0;
>
> - if (dwc2_is_device_mode(dwc2))
> + if (dwc2_is_device_mode(dwc2)) {
> ret = s3c_hsotg_resume(dwc2);
> + } else {
> + phy_power_on(dwc2->phy);
> + phy_init(dwc2->phy);
> +
> + }
> return ret;
> }
>
> --
> 2.0.0
>



\
 
 \ /
  Last update: 2015-01-09 03:21    [W:0.211 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site