lkml.org 
[lkml]   [2015]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] x86_64,entry: Fix RCX for traced syscalls
On Mon, Jan 05, 2015 at 12:31:15PM -0800, Andy Lutomirski wrote:
> Do you have context tracking on?

Yap, it is enabled for whatever reason:
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_FORCE=y
CONFIG_HAVE_CONTEXT_TRACKING=y

> I assume that's in the historical tree?

Yeah.

> > [ 180.059170] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
> > [ 180.066873] ata1.00: failed command: WRITE FPDMA QUEUED
> > [ 180.072158] ata1.00: cmd 61/08:00:a8:ac:d9/00:00:23:00:00/40 tag 0 ncq 4096 out
> > [ 180.072158] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>
> That's really weird. The only thing I can think of is that somehow we
> returned to user mode without enabling interrupts.

Right, considering FIXUP_TOP_OF_STACK is used in a bunch of cases in
entry_64.S, no wonder it corrupts something.

> This leads me to wonder: why do we save eflags in the R11 pt_regs
> slot?

That: "If executed in 64-bit mode, SYSRET loads the lower-32 RFLAGS bits
from R11[31:0] and clears the upper 32 RFLAGS bits."

> This seems entirely backwards, not to mention that it accounts for two
> instructions in each of FIXUP_TOP_OF_STACK and RESTORE_TOP_OF_STACK
> for no apparently reason whatsoever.

> Can you send the full output from syscall_exit_regs_64 from here:
>
> https://gitorious.org/linux-test-utils/linux-clock-tests/source/34884122b6ebe81d9b96e3e5128b6d6d95082c6e:
>
> with the patch applied (assuming it even gets that far for you)? I
> see results like:
>
> [NOTE] syscall ffff: orig RCX = 1 ss = 2b orig_ss = 6b flags =
> 217 orig_flags = 217
>
> which seems fine.

./syscall_exit_regs_64
[OK] int80 ffff: AX = ffffffffffffffda
[OK] int80 40000000: AX = ffffffffffffffda
[OK] syscall ffff: RCX = 400962 RIP = 400962
[OK] syscall ffff: AX = ffffffffffffffda
[NOTE] syscall ffff: orig RCX = 1 ss = 2b orig_ss = 6b flags = 217 orig_flags = 217
[OK] syscall 40000000: RCX = 400962 RIP = 400962
[FAIL] syscall 40000000: AX = fffffffffffffff7
[NOTE] syscall 40000000: orig RCX = 1 ss = 2b orig_ss = 6b flags = 217 orig_flags = 217
[OK] syscall(ffff): ret = -1, errno = 38

> Are you seeing this with the whole series applied or with only this patch?

I applied this patch only and started seeing those. Then I booted in the
previous kernel and tried to repro but it didn't trigger.

I'll try hammering on the kernel *without* your patch to see whether I
can trigger it somehow...

--
Regards/Gruss,
Boris.

Sent from a fat crate under my desk. Formatting is fine.
--


\
 
 \ /
  Last update: 2015-01-06 16:41    [W:0.109 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site