Messages in this thread | | | Date | Tue, 6 Jan 2015 09:25:48 -0400 | From | Eduardo Valentin <> | Subject | Re: [PATCH V2] Thermal: imx: add clk disable/enable for suspend/resume |
| |
On Tue, Jan 06, 2015 at 06:50:22PM +0800, Anson Huang wrote: > Thermal sensor's clk is from pll3_usb_otg, per hardware > design requirement, need to make sure pll3_usb_otg is disabled > before STOP mode is entered, otherwise, all PFDs under it may > enter incorrect state, this patch disables pll3_usb_otg before > suspend and enables it after resume. > > Signed-off-by: Anson Huang <b20788@freescale.com>
adding to my -fixes branch.
> --- > drivers/thermal/imx_thermal.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c > index 461bf3d..dc8bcd8 100644 > --- a/drivers/thermal/imx_thermal.c > +++ b/drivers/thermal/imx_thermal.c > @@ -600,6 +600,7 @@ static int imx_thermal_suspend(struct device *dev) > regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP); > regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN); > data->mode = THERMAL_DEVICE_DISABLED; > + clk_disable_unprepare(data->thermal_clk); > > return 0; > } > @@ -609,6 +610,7 @@ static int imx_thermal_resume(struct device *dev) > struct imx_thermal_data *data = dev_get_drvdata(dev); > struct regmap *map = data->tempmon; > > + clk_prepare_enable(data->thermal_clk); > /* Enabled thermal sensor after resume */ > regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); > regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); > -- > 1.9.1 > [unhandled content-type:application/pgp-signature] | |