lkml.org 
[lkml]   [2015]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] Input: adxl34x - add device tree documentation
Date
This patch adds a basic documentation regarding the device tree
bindings of adxl34x digital accelerometer.

Signed-off-by: Walter Lozano <walter@vanguardiasur.com.ar>
---
.../devicetree/bindings/input/adxl34x.txt | 53 ++++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/adxl34x.txt

diff --git a/Documentation/devicetree/bindings/input/adxl34x.txt b/Documentation/devicetree/bindings/input/adxl34x.txt
new file mode 100644
index 0000000..0774f7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adxl34x.txt
@@ -0,0 +1,53 @@
+Device Tree bindings for adxl34x digital accelerometer, both spi and i2c.
+
+Depending on the interface this node should be a child of a spi or i2c bus.
+
+Required properties:
+- compatible: "adxl34x"
+- reg: SPI/I2C device address
+- interrupt-parent: a phandle for the interrupt controller
+- interrupts: interrupt to which the chip is connected
+
+Optional parameters:
+Please refer to include/linux/input/adxl34x.h for specific info. If the value
+is not specified the driver will use its default.
+
+- adi,tap-axis-control: u8 default 0
+- adi,tap-threshold: u8 default 35
+- adi,tap-duration: u8 default 3
+- adi,tap-latency: u8 default 20
+- adi,tap-window: u8 default 20
+- adi,act-axis-control: u8 default 0xFF
+- adi,activity-threshold: u8 default 6
+- adi,inactivity-threshold: u8 default 4
+- adi,inactivity-time: u8 default 3
+- adi,free-fall-threshold: u8 default 8
+- adi,free-fall-time: u8 default 20
+- adi,data-rate: u8 default 8
+- adi,data-range: u8 default 4
+- adi,low-power-mode: u8 defaut 0
+- adi,power-mode: u8 default 0x30
+- adi,fifo-mode: u8 default 2
+- adi,watermark: u8 default 0
+- adi,use-int2: u8
+- adi,orientation-enable: u8 default 0
+- adi,deadzone-angle: u8 default 0
+- divisor-length: u8 default 0
+
+Example
+
+&i2c1 {
+ status = "okay";
+
+ accel1: accelerometer@53 {
+ compatible = "adxl34x";
+ reg = <0x53>;
+
+ interrupt-parent = <&portc>;
+ interrupts = <3 2>;
+
+ adi,inactivity-time = /bits/ 8 <6>;
+ adi,data-range = /bits/ 8 <1>;
+ };
+};
+
--
1.7.10.4


\
 
 \ /
  Last update: 2015-01-07 04:21    [W:0.195 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site