Messages in this thread | | | Date | Sat, 3 Jan 2015 20:47:25 +0100 | From | Pavel Machek <> | Subject | Re: [PATCHv5 0/2] INPUT: Route keyboard LEDs through the generic LEDs layer |
| |
On Fri 2015-01-02 21:11:17, Samuel Thibault wrote: > Pavel Machek, le Fri 02 Jan 2015 20:53:51 +0100, a écrit : > > input4::capsl/trigger was none by default, that can't be right, right? > > Indeed. And I don't see how it can be that way, since the input4::capsl > LED and the input4-capsl trigger get initialized at the same time in > input_led_connect... (and the order does not matter since both will > try to connect to the other on registration). > > > I tried putting kbd-capslock and input4-capsl there, but that did not > > seem to help. > > That should have. > > > It works with heartbeat trigger, but not with input4-numl > > trigger. > > It should have worked with input4-numl too. > > > vt::capsl/brightness controls capslock led, even when > > input4-capsl/trigger is set to input4-numl. > > It shouldn't. > > > Confused, > > I guess I'm even more. I had tested everything that you have described, > without any issue, on both an internal laptop keyboard and an external > USB keyboard, and have tested again just now, with the same success. > > Which hardware setup do you have, more precisely?
I tested on Thinkpad X60, with internal keyboard. (PS/2, I'd say). I let Debian boot into graphical login prompt, switched to text console, and did the testing there.
Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
| |