lkml.org 
[lkml]   [2015]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: zynq: DT: Add pinctrl information to USB nodes
Date
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
Hi Michal,

This could be squashed into 1643b31658c4 'ARM: zynq: DT: Add USB to
device tree' if you decide to rebuild the zynq/dt branch.

Sören
---
arch/arm/boot/dts/zynq-zc702.dts | 26 ++++++++++++++++++++++++++
arch/arm/boot/dts/zynq-zc706.dts | 26 ++++++++++++++++++++++++++
2 files changed, 52 insertions(+)

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 4f8835be4874..483f69ba2cf5 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -312,6 +312,30 @@
bias-disable;
};
};
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO29", "MIO31", "MIO36";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+ "MIO35", "MIO37", "MIO38", "MIO39";
+ bias-disable;
+ };
+ };
};

&sdhci0 {
@@ -330,4 +354,6 @@
status = "okay";
dr_mode = "host";
usb-phy = <&usb_phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 6979ce23175f..3a6260998116 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -261,6 +261,30 @@
bias-disable;
};
};
+
+ pinctrl_usb0_default: usb0-default {
+ mux {
+ groups = "usb0_0_grp";
+ function = "usb0";
+ };
+
+ conf {
+ groups = "usb0_0_grp";
+ slew-rate = <0>;
+ io-standard = <1>;
+ };
+
+ conf-rx {
+ pins = "MIO29", "MIO31", "MIO36";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+ "MIO35", "MIO37", "MIO38", "MIO39";
+ bias-disable;
+ };
+ };
};

&sdhci0 {
@@ -279,4 +303,6 @@
status = "okay";
dr_mode = "host";
usb-phy = <&usb_phy0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0_default>;
};
--
2.2.2.1.g63c5777


\
 
 \ /
  Last update: 2015-01-26 21:01    [W:0.078 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site