Messages in this thread | | | Date | Wed, 21 Jan 2015 18:46:58 +0000 | From | Russell King - ARM Linux <> | Subject | Re: [PATCH v2] drm/i2c: tda998x: Set the CEC I2C address based on the slave I2C address. |
| |
On Wed, Jan 21, 2015 at 06:44:05PM +0000, Liviu Dudau wrote: > On Fri, Nov 07, 2014 at 08:31:25AM +0000, Andrew Jackson wrote: > > The I2C address for the TDA9989 and TDA19989 is fixed at 0x34 > > but the two LSBs of the TDA19988's address are set by two configuration > > pins on the chip. Irrespective of the chip, the associated CEC > > peripheral's I2C address is based upon the main I2C address. > > > > This patch avoids any special handling required to support > > systems that contain multiple TDA19988 devices on the same > > I2C bus. > > > > Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> > > Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> > > Hi Andrew, > > What is the status of this patch? Is it going to be pulled by anyone?
It's been sent to David.
-- FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net.
| |