lkml.org 
[lkml]   [2015]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] clk: qcom: Add EBI2 clocks for IPQ806x
On 01/16/2015 06:48 AM, Archit Taneja wrote:
> The NAND controller within EBI2 requires EBI2_CLK and EBI2_ALWAYS_ON_CLK clocks.
> Create structs for these clocks so that they can be used by the NAND controller
> driver. Add an entry for EBI2_AON_CLK in the gcc-ipq806x DT binding document.
>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Signed-off-by: Archit Taneja <architt@codeaurora.org>

Looks ok. I couldn't find this used in the downstream sources though.
Can you point me to it? I'm mostly worried that this is a shared
resource that never should be turned off, so exposing it to drivers may
not be the right idea.

> +static struct clk_branch ebi2_aon_clk = {
> + .hwcg_reg = 0x3b00,
> + .hwcg_bit = 6,
> + .halt_reg = 0x2fcc,
> + .halt_bit = 0,
> + .clkr = {
> + .enable_reg = 0x3b00,
> + .enable_mask = BIT(8),
> + .hw.init = &(struct clk_init_data){
> + .name = "ebi2_always_on_clk",
>

Can this be ebi2_aon_clk to match the macro?

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project



\
 
 \ /
  Last update: 2015-01-16 23:01    [W:0.305 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site