Messages in this thread | | | Date | Thu, 15 Jan 2015 15:34:12 +0100 | From | Nicolas Ferre <> | Subject | Re: [PATCH v3 0/6] AT91 DT for 3.20 #1 |
| |
Le 13/01/2015 19:12, Alexandre Belloni a écrit : > This series enables RTC on the at91sam9n12 and at91rm9200. > It also adds nodes for the SRAM availabe on at91 SoCs. > > Finally it adds a dtsi for the at91sam9xe and uses it for the ethernut5 dts. > > Changes in v3: > - corrected the 9260 and 9g20 reg properties of the SRAM node > > Changes in v2: > - remove the 9x5 errata for the n12 rtc > > Alexandre Belloni (6): > ARM: at91/dt: at91sam9n12: Add RTC node > ARM: at91/dt: rm9200: add RTC node > ARM: at91/dt: at91rm9200ek: enable RTC > ARM: at91/dt: add SRAM nodes > ARM: at91/dt: Add a dtsi for at91sam9xe > ARM: at91/dt: ethernut5: use at91sam9xe.dtsi
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
With the corrected at91sam9rl sram size (0x10000), whole series stacked on top of at91-3.20-dt.
Thanks.
> .../devicetree/bindings/arm/atmel-at91.txt | 1 + > arch/arm/boot/dts/at91rm9200.dtsi | 12 +++++ > arch/arm/boot/dts/at91rm9200ek.dts | 4 ++ > arch/arm/boot/dts/at91sam9260.dtsi | 5 ++ > arch/arm/boot/dts/at91sam9261.dtsi | 5 ++ > arch/arm/boot/dts/at91sam9263.dtsi | 10 ++++ > arch/arm/boot/dts/at91sam9g20.dtsi | 9 ++++ > arch/arm/boot/dts/at91sam9g45.dtsi | 7 ++- > arch/arm/boot/dts/at91sam9n12.dtsi | 12 +++++ > arch/arm/boot/dts/at91sam9rl.dtsi | 5 ++ > arch/arm/boot/dts/at91sam9x5.dtsi | 5 ++ > arch/arm/boot/dts/at91sam9xe.dtsi | 60 ++++++++++++++++++++++ > arch/arm/boot/dts/ethernut5.dts | 2 +- > arch/arm/boot/dts/sama5d3.dtsi | 5 ++ > arch/arm/boot/dts/sama5d4.dtsi | 5 ++ > 15 files changed, 144 insertions(+), 3 deletions(-) > create mode 100644 arch/arm/boot/dts/at91sam9xe.dtsi >
-- Nicolas Ferre
| |