lkml.org 
[lkml]   [2015]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 00/11] memory: add Atmel EBI (External Bus Interface) driver
Hi Lee,

On Wed, 3 Dec 2014 21:44:04 +0100
Boris Brezillon <boris.brezillon@free-electrons.com> wrote:

> The EBI (External Bus Interface) is used to access external peripherals
> (NOR, SRAM, NAND, and other specific devices like ethernet controllers).
> Each device is assigned a CS line and an address range and can have its
> own configuration (timings, access mode, bus width, ...).
> This driver provides a generic DT binding to configure a device according
> to its requirements.
> For specific device controllers (like the NAND one) the SMC timings
> should be configured by the controller driver through the matrix and
> smc syscon regmaps.
>
> The first 4 patches introduce 2 syscon devices needed to configure the
> EBI bus, patch 5 and 6 adds support for the EBI bus, and the remaining
> patches declares the EBI related nodes in sama5d3 dts[i] files.

Can you take the first 4 patches of this series (adding 2 syscon
devices and their associated bindings doc) for 3.20 ?
Alexandre has worked on multi platform support for Atmel SoCs and his
work depends on these two syscon devices.

Let me know if you want me to send to send a new series containing only
those 4 commits.

Best Regards,

Boris

--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2015-01-11 14:01    [W:0.140 / U:1.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site