lkml.org 
[lkml]   [2015]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2 2/2] spi: orion: Add multiple chip select support to spi-orion
Date
This commit adds support for multiple hardware chip selects to spi-orion.
The number of supported chip selects varies based on the SoC and pin
configuration, so it is set using the num-cs device tree binding.

Signed-off-by: Ken Wilson <ken.wilson@opengear.com>
---
Documentation/devicetree/bindings/spi/spi-orion.txt | 3 +++
drivers/spi/spi-orion.c | 17 +++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt
index 50c3a3d..0f8fd7e 100644
--- a/Documentation/devicetree/bindings/spi/spi-orion.txt
+++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -6,6 +6,8 @@ Required properties:
- cell-index : Which of multiple SPI controllers is this.
Optional properties:
- interrupts : Is currently not used.
+- num-cs : The total number of chip selects used by this platform.
+ If unset, this defaults to 1.

Example:
spi@10600 {
@@ -15,5 +17,6 @@ Example:
cell-index = <0>;
reg = <0x10600 0x28>;
interrupts = <23>;
+ num-cs = <1>;
status = "disabled";
};
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index e6ac9d5..1c28152 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -28,7 +28,6 @@
/* Runtime PM autosuspend timeout: PM is fairly light on this driver */
#define SPI_AUTOSUSPEND_TIMEOUT 200

-#define ORION_NUM_CHIPSELECTS 1 /* only one slave is supported*/
#define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */

#define ORION_SPI_IF_CTRL_REG 0x00
@@ -44,6 +43,10 @@
#define ARMADA_SPI_CLK_PRESCALE_MASK 0xDF
#define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \
ORION_SPI_MODE_CPHA)
+#define ORION_SPI_CS_MASK 0x1C
+#define ORION_SPI_CS_SHIFT 2
+#define ORION_SPI_CS(cs) ((cs << ORION_SPI_CS_SHIFT) & \
+ ORION_SPI_CS_MASK)

enum orion_spi_type {
ORION_SPI,
@@ -221,6 +224,10 @@ static void orion_spi_set_cs(struct spi_device *spi, bool enable)

orion_spi = spi_master_get_devdata(spi->master);

+ orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, ORION_SPI_CS_MASK);
+ orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG,
+ ORION_SPI_CS(spi->chip_select));
+
/* Chip select logic is inverted from spi_set_cs */
if (!enable)
orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
@@ -406,17 +413,23 @@ static int orion_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
if (pdev->dev.of_node) {
u32 cell_index;
+ u32 num_cs;

if (!of_property_read_u32(pdev->dev.of_node, "cell-index",
&cell_index))
master->bus_num = cell_index;
+
+ if (!of_property_read_u32(pdev->dev.of_node, "num_cs",
+ &num_cs))
+ master->num_chipselect = num_cs;
+ else
+ master->num_chipselect = 1;
}

/* we support only mode 0, and no options */
master->mode_bits = SPI_CPHA | SPI_CPOL;
master->set_cs = orion_spi_set_cs;
master->transfer_one = orion_spi_transfer_one;
- master->num_chipselect = ORION_NUM_CHIPSELECTS;
master->setup = orion_spi_setup;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
master->auto_runtime_pm = true;
--
2.0.0


\
 
 \ /
  Last update: 2015-01-12 04:21    [W:0.059 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site