lkml.org 
[lkml]   [2015]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] Documentation: Add entry for dell-laptop sysfs interface
Date
On Friday 09 January 2015 22:57:14 Darren Hart wrote:
> On Wed, Dec 31, 2014 at 12:20:59PM +0100, Gabriele Mazzotta wrote:
> > On Tuesday 30 December 2014 21:31:49 Brian Norris wrote:
> > > Hi,
> > >
> > > On Wed, Dec 03, 2014 at 06:41:33PM +0100, Gabriele Mazzotta wrote:
> > > > Add the documentation for the new sysfs interface of dell-laptop
> > > > that allows to configure the keyboard illumination on Dell systems.
> > > >
> > > > Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
> > > > Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
> > > > ---
> > > > .../ABI/testing/sysfs-platform-dell-laptop | 60 ++++++++++++++++++++++
> > > > 1 file changed, 60 insertions(+)
> > > > create mode 100644 Documentation/ABI/testing/sysfs-platform-dell-laptop
> > > >
> > > > diff --git a/Documentation/ABI/testing/sysfs-platform-dell-laptop b/Documentation/ABI/testing/sysfs-platform-dell-laptop
> > > > new file mode 100644
> > > > index 0000000..7969443
> > > > --- /dev/null
> > > > +++ b/Documentation/ABI/testing/sysfs-platform-dell-laptop
> > > > @@ -0,0 +1,60 @@
> > > > +What: /sys/class/leds/dell::kbd_backlight/als_setting
> > > > +Date: December 2014
> > > > +KernelVersion: 3.19
> > > > +Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
> > > > + Pali Rohár <pali.rohar@gmail.com>
> > > > +Description:
> > > > + This file allows to control the automatic keyboard
> > > > + illumination mode on some systems that have an ambient
> > > > + light sensor. Write 1 to this file to enable the auto
> > > > + mode, 0 to disable it.
> > > [...]
> > >
> > > This entry appears wrong, or at least incomplete. My system boots with a
> > > default value of 18, and the 'set' implementation accepts any value from
> > > 0 to 255.
> > >
> > > According to the comments in dell-laptop.c, the value actually means
> > > something different than on/off:
> > >
> > > cbArg3, byte0 Desired setting of ALS value that turns the light on or off.
> > >
> > > Admittedly, I'm not clear on what the intended interface is, as I've
> > > never had the ALS / keyboard backlight controls all working properly on
> > > my laptop in the first place, but I thought this would be the right
> > > place to ask about getting the documentation and driver in sync.
> >
> > Hi,
> >
> > You are perfectly right, the documentation is wrong and I'm sorry for
> > that. als_setting should allow you to define when the keyboard
> > backlight has to be turned on or off depending on the value reported
> > by the ambient light sensor.
> >
> > Please note that not everything that is in libsmbios [1] is implemented
> > in the kernel driver. Take a look at it, recently there have been few
> > changes related to the ALS settings. Probably they are not needed given
> > that you are able to set the threshold with the current kernel driver,
> > but you might find something interesting.
> >
> > I'll submit a patch to correct the documentation, thanks for reporting.
>
> Hi Gabriele,
>
> Have I missed a patch from you for this? I'd like to see this corrected in the
> 3.19 rc cycle.
>
> Thanks,

I'm sorry, I must have done something wrong when I sent the patch, the
CC list is not complete.

Thanks for the link Brian.


\
 
 \ /
  Last update: 2015-01-10 14:21    [W:0.080 / U:1.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site