Messages in this thread Patch in this message | | | From | Antoine Tenart <> | Subject | [PATCH v2 3/8] Documentation: bindings: net: add the Marvell PXA168 Ethernet controller | Date | Tue, 9 Sep 2014 16:44:03 +0200 |
| |
This adds the binding documentation for the Marvell PXA168 Ethernet controller, following its DT support.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- .../devicetree/bindings/net/marvell-pxa168.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/marvell-pxa168.txt
diff --git a/Documentation/devicetree/bindings/net/marvell-pxa168.txt b/Documentation/devicetree/bindings/net/marvell-pxa168.txt new file mode 100644 index 000000000000..3a5320ad09a3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-pxa168.txt @@ -0,0 +1,22 @@ +* Marvell PXA168 Ethernet Controller + +Required properties: +- compatible: should be "marvell,pxa168-eth". +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device. +- clocks: pointer to the clock for the device. +- clock-names: should be "MFUCLK". + +Optional properties: +- port-id: should be '0','1' or '2'. +- phy-addr: MDIO address of the PHY. + +Example: + + eth0: ethernet@f7b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xf7b90000 0x10000>; + clocks = <&chip CLKID_GETH0>; + clock-names = "MFUCLK"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + }; -- 1.9.1
| |