lkml.org 
[lkml]   [2014]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/2] rtc: ds1307: add trickle charger device tree binding.
On Tue, Sep 09, 2014 at 01:38:39PM +0300, Matti Vaittinen wrote:
> rtc: ds1307: add trickle charger device tree binding.
>
> Some DS13XX devices have "trickle chargers". Introduce a device tree
> binding for specifying the trickle charger configuration for ds1339.
>
> Only ds1339 dt binding is supported because this is the only chip I have.
> I _assume_ the code would have worked on other allready supported chips.
> However I cannot check the resistor values for the other chips or test them.
> For other chips the driver code works as earlier Eg. it does not check the
> dt bindings at all.
>

I forgot to mention changes compared to patch v3:
-Splitted patch to two. Documentation and driver changes both in own
patches.
-Switched the diode-connected to be the default when charging is
used.
-Fixed the property name to match the one in the documentation.

Br.
Matti Vaittinen



\
 
 \ /
  Last update: 2014-09-09 12:21    [W:0.046 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site