lkml.org 
[lkml]   [2014]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH V1 2/3] ARM: dts: imx6qdl: add baud clock and clock-names for ssi
    Date
    Baud clock is used for bit clock generation in master mode. Ipg clock
    is peripheral clock and peripheral access clock.

    Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
    ---
    arch/arm/boot/dts/imx6qdl.dtsi | 12 +++++++++---
    1 file changed, 9 insertions(+), 3 deletions(-)

    diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
    index 70d7207..0de8806 100644
    --- a/arch/arm/boot/dts/imx6qdl.dtsi
    +++ b/arch/arm/boot/dts/imx6qdl.dtsi
    @@ -280,7 +280,9 @@
    "fsl,imx51-ssi";
    reg = <0x02028000 0x4000>;
    interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
    - clocks = <&clks IMX6QDL_CLK_SSI1_IPG>;
    + clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
    + <&clks IMX6QDL_CLK_SSI1>;
    + clock-names = "ipg", "baud";
    dmas = <&sdma 37 1 0>,
    <&sdma 38 1 0>;
    dma-names = "rx", "tx";
    @@ -294,7 +296,9 @@
    "fsl,imx51-ssi";
    reg = <0x0202c000 0x4000>;
    interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
    - clocks = <&clks IMX6QDL_CLK_SSI2_IPG>;
    + clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
    + <&clks IMX6QDL_CLK_SSI2>;
    + clock-names = "ipg", "baud";
    dmas = <&sdma 41 1 0>,
    <&sdma 42 1 0>;
    dma-names = "rx", "tx";
    @@ -308,7 +312,9 @@
    "fsl,imx51-ssi";
    reg = <0x02030000 0x4000>;
    interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
    - clocks = <&clks IMX6QDL_CLK_SSI3_IPG>;
    + clocks = <&clks IMX6QDL_CLK_SSI3_IPG>,
    + <&clks IMX6QDL_CLK_SSI3>;
    + clock-names = "ipg", "baud";
    dmas = <&sdma 45 1 0>,
    <&sdma 46 1 0>;
    dma-names = "rx", "tx";
    --
    1.7.9.5


    \
     
     \ /
      Last update: 2014-09-09 12:01    [W:2.750 / U:0.628 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site