Messages in this thread | | | Date | Sun, 07 Sep 2014 17:35:18 +0400 | From | Sergei Shtylyov <> | Subject | Re: [PATCH RFC 1/3] DT: add binding for MXS regulator |
| |
Hello.
On 9/7/2014 3:37 PM, Stefan Wahren wrote:
> This patch adds the Device tree bindings for the Freescale MXS on-chip > regulators.
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> > --- > .../bindings/regulator/mxs-regulator.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/mxs-regulator.txt
> diff --git a/Documentation/devicetree/bindings/regulator/mxs-regulator.txt b/Documentation/devicetree/bindings/regulator/mxs-regulator.txt > new file mode 100644 > index 0000000..c3226cc > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/mxs-regulator.txt > @@ -0,0 +1,38 @@ > +MXS regulators > + > +Required node properties: > +- compatible: Should be "fsl,<soc>-power", where soc is "imx23" or "imx28" > +- reg: Offset and length of the register set for the device > + > +Required regulator properties: > +- compatible: Must be "fsl,mxs-regulator" > +- reg: Offset of the register set for the regulator > +- mxs-max-reg-val: Maximum value of this register > + > +Optional regulator properties: > +- mxs-default-microvolt: initial voltage of the regulator
Vendor specific property names should be prefixed with the vendor name and comma.
WBR, Sergei
| |