lkml.org 
[lkml]   [2014]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v12 10/12] PCI: Assign unassigned bus resources in pci_scan_root_bus()
On 09/23/2014 08:41 PM, Bjorn Helgaas wrote:
> On Tue, Sep 23, 2014 at 7:18 PM, Liviu Dudau <liviu@dudau.co.uk> wrote:
>> On Tue, Sep 23, 2014 at 08:01:12PM +0100, Liviu Dudau wrote:
>>> If the firmware has not assigned all the bus resources and
>>> we are not just probing the PCIe busses, it makes sense to
>>> assign the unassigned resources in pci_scan_root_bus().
>>>
>>> Cc: Bjorn Helgaas <bhelgaas@google.com>
>>> Cc: Arnd Bergmann <arnd@arndb.de>
>>> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
>>> Cc: Rob Herring <robh+dt@kernel.org>
>>> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
>>> ---
>>> drivers/pci/probe.c | 3 +++
>>> 1 file changed, 3 insertions(+)
>>>
>>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>>> index ef891d2..508cf61 100644
>>> --- a/drivers/pci/probe.c
>>> +++ b/drivers/pci/probe.c
>>> @@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
>>> if (!found)
>>> pci_bus_update_busn_res_end(b, max);
>>>
>>> + if (!pci_has_flag(PCI_PROBE_ONLY))
>>> + pci_assign_unassigned_bus_resources(b);
>>> +
>>> pci_bus_add_devices(b);
>>> return b;
>>> }
>>> --
>>> 2.1.0
>>>
>>
>> Bjorn,
>>
>> If you are OK with this patch, can you let me know how do you feel about
>> making pci_scan_root_bus() set up the bus->msi pointer as well?
>
> I'm not opposed to it, but I have the same question as for setting up
> the domain: how does pci_scan_root_bus() learn what to assign to
> bus->msi? It currently only gets a "void *sysdata" so there's no
> obvious place to put it there. You could add a pcibios interface to
> retrieve it, I suppose, but I'm starting to get uncomfortable with
> adding more of those because we have such a mess of them already.
>
> Bjorn

[Suravee] Liviu and I had a talk during Linaro Connect, and we came up
with a new binding for the pcie controller called "msi-parent" which is
supposed to contain phandle to the corresponded msi-controller.

>
>> Side note: I don't know exactly how to do it now, but setting bus->msi is
>> needed by platforms that are based on my patches and want to use MSI,
>> otherwise they have to open code pci_scan_root_bus() to set it. I haven't
>> made any attempts to do it in this series as the GICv2m patches are not
>> ready yet, but I can see the need arriving soon.

[Suravee] I just sent out an RFC which implements the described binding
here.

https://lkml.org/lkml/2014/9/28/149

Any feedback/comments are welcome :)

Thanks,

Suravee


\
 
 \ /
  Last update: 2014-09-28 23:41    [W:0.160 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site