[lkml]   [2014]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support
Hello Huang, Brian,

This is just a new proposal to support raw accesses in a more standard way
in the GPMI driver.
This series has been tested on an imx28 board.

Any suggestions are welcome.

Best Regards,


Changes since v2:
- fixed a bug in gpmi_move_bits
- add a raw_buffer field to be used when using raw access methods
(experienced memory corruptions when directly using page_buffer_virt
- add raw OOB access functions

Boris BREZILLON (3):
mtd: nand: gpmi: add gpmi_move_bits function
mtd: nand: gpmi: add proper raw access support
mtd: nand: gpmi: add raw oob access functions

drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 88 ++++++++++++++++++++
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 144 +++++++++++++++++++++++++++++++++
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 ++
3 files changed, 238 insertions(+)


 \ /
  Last update: 2014-09-23 16:41    [W:0.711 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site