lkml.org 
[lkml]   [2014]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v6 0/9] rtc: at91sam9: add DT support
    Date
    Hello,

    This patch series adds DT support to the atmel at91sam9 RTC driver.

    It also removes any machine specific inclusions to prepare the migration
    to multi platform kernel support, and retain the slow clock to prevent
    the CCF from disabling it at the end of boot.

    Best Regards,

    Boris

    Changes since v4:
    - replace 'rtc' by 'rtt' where appropriate
    - fix commit messages

    Changes since v4:
    - add a TODO comment to remember removing non DT board support code

    Changes since v3:
    - add GPBR DT bindings doc
    - fix a coding style issues
    - add Alexandre's Acked-by
    - change RTT DT bindings

    Changes since v2:
    - make use of syscon/regmap to avoid directly requesting/mapping a GPBR
    memory region in the RTT driver

    Changes since v1:
    - remove non CCF specific case by adding the appropriate clk_lookup
    entries in arch/arm/mach-at91/<soc-name>.c files

    Boris BREZILLON (9):
    rtc: at91sam9: remove references to mach specific headers
    rtc: at91sam9: use standard readl/writel functions instead of raw
    versions
    rtc: at91sam9: replace devm_ioremap by devm_ioremap_resource
    rtc: at91sam9: add DT support
    rtc: at91sam9: make use of syscon/regmap to access GPBR registers
    ARM: at91: add clk_lookup entry for RTT devices
    rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
    rtc: at91sam9: add DT bindings documentation
    mfd: syscon: add Atmel GPBR DT bindings documention

    .../devicetree/bindings/mfd/atmel,gpbr.txt | 15 +++
    .../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 23 ++++
    arch/arm/mach-at91/at91sam9260.c | 2 +
    arch/arm/mach-at91/at91sam9261.c | 2 +
    arch/arm/mach-at91/at91sam9263.c | 4 +
    arch/arm/mach-at91/at91sam9g45.c | 2 +
    arch/arm/mach-at91/at91sam9rl.c | 2 +
    arch/arm/mach-at91/clock.c | 2 +-
    arch/arm/mach-at91/clock.h | 1 +
    drivers/rtc/Kconfig | 1 +
    drivers/rtc/rtc-at91sam9.c | 138 ++++++++++++++++-----
    11 files changed, 162 insertions(+), 30 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/mfd/atmel,gpbr.txt
    create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt

    --
    1.9.1



    \
     
     \ /
      Last update: 2014-09-22 18:21    [W:3.968 / U:0.364 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site