lkml.org 
[lkml]   [2014]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] ARM: dts: add rk3288 i2s controller
Date
Am Freitag, 12. September 2014, 18:54:55 schrieb Jianqun:
> Add dt for rk3288 i2s controller, since i2s clock pins and data pins
> default to be GPIO, this patch also add pinctrl to mux them.
>
> Tested on RK3288 board.
>
> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>

I've added this to my tree.

> ---
> change since v1:
> - move i2s relate codes later in order by CPU address map
>
> arch/arm/boot/dts/rk3288.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 5950b0a..5b17718 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -271,6 +271,21 @@
> status = "disabled";
> };
>
> + i2s: i2s@ff890000 {
> + compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
> + reg = <0xff890000 0x10000>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
> + dma-names = "tx", "rx";
> + clock-names = "i2s_hclk", "i2s_clk";
> + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2s0_clk>;
> + status = "disabled";
> + };
> +
> gic: interrupt-controller@ffc01000 {
> compatible = "arm,gic-400";
> interrupt-controller;
> @@ -463,6 +478,17 @@
> };
> };
>
> + i2s0 {
> + i2s0_clk: i2s0_clk {
> + rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>,
> + <6 1 RK_FUNC_1 &pcfg_pull_none>,
> + <6 2 RK_FUNC_1 &pcfg_pull_none>,
> + <6 3 RK_FUNC_1 &pcfg_pull_none>,
> + <6 4 RK_FUNC_1 &pcfg_pull_none>,
> + <6 8 RK_FUNC_1 &pcfg_pull_none>;
> + };
> + };
> +
> sdmmc {
> sdmmc_clk: sdmmc-clk {
> rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;



\
 
 \ /
  Last update: 2014-09-22 17:01    [W:6.553 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site