lkml.org 
[lkml]   [2014]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: FIX ME in oxu210p-hcd.c


On 14-09-21 10:11 PM, Peter Chen wrote:
>
>
>>>> Subject: Re: FIX ME in oxu210p-hcd.c
>>>>
>>>>
>>>> I found a unfixed FIX ME in the file stated in my above message. I am
>>>> wondering what to set hcd->self.comtroller->dma_mask to as it's now
>>>> been defined to NULL and clearly even as a newbie this seem incorrect.
>>>> Regards Nick
>>>
>>> Usually, it is set at its controller driver or pass through through
>>> device tree or platform data.
>>>
>>> Peter
>>>
>> Sorry Peter,
>> I apologize for asking for more help here but I will paste the function below and
>> with my changes.
>> Please let me known if I am wrong and how to fix it as I new here.
>> Sorry for Wasting Your Time,
>
> You are welcome
>
>> Nick
>> static int oxu_reset(struct usb_hcd *hcd) {
>> struct oxu_hcd *oxu = hcd_to_oxu(hcd);
>> int ret;
>>
>> spin_lock_init(&oxu->mem_lock);
>> INIT_LIST_HEAD(&oxu->urb_list);
>> oxu->urb_len = 0;
>>
>> - /* FIMXE */
>> + hcd->self.controller->dma_mask = hcd->regs;
>>
>
> It is the dma mask, not the register.
>
> Try below patch to see if it works for you:
>
> diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
> index da5fb0e..5549851 100644
> --- a/drivers/usb/host/oxu210hp-hcd.c
> +++ b/drivers/usb/host/oxu210hp-hcd.c
> @@ -37,6 +37,7 @@
> #include <linux/moduleparam.h>
> #include <linux/dma-mapping.h>
> #include <linux/io.h>
> +#include <linux/dma-mapping.h>
>
> #include <asm/irq.h>
> #include <asm/unaligned.h>
> @@ -3841,6 +3842,12 @@ static int oxu_drv_probe(struct platform_device *pdev)
> goto error;
> }
>
> + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> + if (ret) {
> + dev_err(&pdev->dev, "set dma mask error\n");
> + goto error;
> + }
> +
> /* Allocate a driver data struct to hold useful info for both
> * SPH & OTG devices
> */
>
> Peter
>
>
>> if (oxu->is_otg) {
>> oxu->caps = hcd->regs + OXU_OTG_CAP_OFFSET;
>> oxu->regs = hcd->regs + OXU_OTG_CAP_OFFSET + \
>> HC_LENGTH(readl(&oxu->caps->hc_capbase));
>>
>> oxu->mem = hcd->regs + OXU_SPH_MEM;
>> } else {
>> oxu->caps = hcd->regs + OXU_SPH_CAP_OFFSET;
>> oxu->regs = hcd->regs + OXU_SPH_CAP_OFFSET + \
>> HC_LENGTH(readl(&oxu->caps->hc_capbase));
>>
>> oxu->mem = hcd->regs + OXU_OTG_MEM;
>> }
>>
>> oxu->hcs_params = readl(&oxu->caps->hcs_params);
>> oxu->sbrn = 0x20;
>>
>> ret = oxu_hcd_init(hcd);
>> if (ret)
>> return ret;
>>
>> return 0;
>> }
Unfortunately I can't get it to apply with git apply and get the following message,
Checking patch drivers/usb/host/oxu210hp-hcd.c...
error: while searching for:
goto error;
}

/* Allocate a driver data struct to hold useful info for both
* SPH & OTG devices
*/

error: patch failed: drivers/usb/host/oxu210hp-hcd.c:3841
error: drivers/usb/host/oxu210hp-hcd.c: patch does not apply
I will paste the version of my patch file for your troubles.
Regards Nick
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index da5fb0e..5549851 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -37,6 +37,7 @@
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>

#include <asm/irq.h>
#include <asm/unaligned.h>
@@ -3841,6 +3842,12 @@ static int oxu_drv_probe(struct platform_device *pdev)
goto error;
}

+ ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pdev->dev, "set dma mask error\n");
+ goto error;
+ }
+
/* Allocate a driver data struct to hold useful info for both
* SPH & OTG devices
*/
\
 
 \ /
  Last update: 2014-09-22 05:01    [W:0.078 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site