lkml.org 
[lkml]   [2014]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] devicetree: cadence_ttc: Document binding for timer width
On 09/18/2014 08:36 PM, Mark Rutland wrote:
> On Thu, Sep 18, 2014 at 06:07:40AM +0100, Michal Simek wrote:
>> On 09/17/2014 06:17 PM, Mark Rutland wrote:
>>> On Wed, Sep 17, 2014 at 03:30:49PM +0100, Michal Simek wrote:
>>>> From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
>>>>
>>>> Modern TTC implementations can extend the timer width to 32 bit. This
>>>> feature is not self identifying so the driver needs to be made aware
>>>> via device tree.
>>>>
>>>> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
>>>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>>>> ---
>>>>
>>>> Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt | 4 ++++
>>>> 1 file changed, 4 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
>>>> index 993695c659e1..5439976eca6b 100644
>>>> --- a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
>>>> +++ b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
>>>> @@ -6,6 +6,9 @@ Required properties:
>>>> - interrupts : A list of 3 interrupts; one per timer channel.
>>>> - clocks: phandle to the source clock
>>>>
>>>> +Optional properties:
>>>> +- timer-width: Bit width of the timer. Either 16 or 32 (default 16).
>>>
>>> Are we expecting TTC implementations with widths other than 16 or 32?
>>
>> IRC if you use 32bit timer and setup for example 24bit width it should work
>> too and you are just ignoring that upper bits.
>
> Sure, but what I'd like to know is whether we expect HW implementations
> other than 16 or 32 bit rather than whether or not the driver will work
> in that case. I'm not saying no to this patch; I'm just curious.

We are trying to find this information.


>>> This looks sane to me, but we might be able to just have a 32-bit-timer
>>> property if we don't expect arbitrary widths.
>>
>> Definitely model different timer width is easily possible to do in qemu
>> that's why I think having more generic property timer-width is just better than
>> having property used just for one case.
>
> Ok, so if you want to support that can we change the documentation
> wording to be:
>
> - timer-width: Bit width of the timer, necessary if not 16.
>
> That implies support for other bit widths, and when the property needs
> to be set (IMO 'default' sounds too much like a driver description than
> a contract description).

Default one is just option which is used for origin configuration
and we should be backward compatible.
I am OK with this description. Will send v2.

> Does this apply to one timer register, or are multiple registers
> affected?

It applies for all 3 timers. All of them are 16 or 32.

Thanks,
Michal

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-09-19 09:21    [W:0.150 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site