lkml.org 
[lkml]   [2014]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/6] usb: hub: rename hub_events() to hub_event() and handle only one event there
Date
We would like to convert khubd kthread to a workqueue. As a result hub_events()
will handle only one event per call.

In fact, we could do this already now because there is another cycle in
hub_thread(). It calls hub_events() until hub_event_list is empty.

This patch renames the function to hub_event(), removes the while cycle, and
renames the goto targets from loop* to out*.

When touching the code, it fixes also formatting of dev_err() and dev_dbg()
calls to make checkpatch.pl happy :-)

Signed-off-by: Petr Mladek <pmladek@suse.cz>
---
drivers/usb/core/hub.c | 236 +++++++++++++++++++++++--------------------------
1 file changed, 111 insertions(+), 125 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8f35e5158daf..f1efd5a493ba 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4994,8 +4994,7 @@ static void port_event(struct usb_hub *hub, int port1)
hub_port_connect_change(hub, port1, portstatus, portchange);
}

-
-static void hub_events(void)
+static void hub_event(void)
{
struct list_head *tmp;
struct usb_device *hdev;
@@ -5006,144 +5005,131 @@ static void hub_events(void)
u16 hubchange;
int i, ret;

- /*
- * We restart the list every time to avoid a deadlock with
- * deleting hubs downstream from this one. This should be
- * safe since we delete the hub from the event list.
- * Not the most efficient, but avoids deadlocks.
- */
- while (1) {
+ /* Grab the first entry at the beginning of the list */
+ spin_lock_irq(&hub_event_lock);
+ if (list_empty(&hub_event_list)) {
+ spin_unlock_irq(&hub_event_lock);
+ return;
+ }

- /* Grab the first entry at the beginning of the list */
- spin_lock_irq(&hub_event_lock);
- if (list_empty(&hub_event_list)) {
- spin_unlock_irq(&hub_event_lock);
- break;
- }
+ tmp = hub_event_list.next;
+ list_del_init(tmp);

- tmp = hub_event_list.next;
- list_del_init(tmp);
+ hub = list_entry(tmp, struct usb_hub, event_list);
+ kref_get(&hub->kref);
+ spin_unlock_irq(&hub_event_lock);

- hub = list_entry(tmp, struct usb_hub, event_list);
- kref_get(&hub->kref);
- spin_unlock_irq(&hub_event_lock);
+ hdev = hub->hdev;
+ hub_dev = hub->intfdev;
+ intf = to_usb_interface(hub_dev);
+ dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
+ hdev->state, hdev->maxchild,
+ /* NOTE: expects max 15 ports... */
+ (u16) hub->change_bits[0],
+ (u16) hub->event_bits[0]);
+
+ /* Lock the device, then check to see if we were
+ * disconnected while waiting for the lock to succeed. */
+ usb_lock_device(hdev);
+ if (unlikely(hub->disconnected))
+ goto out_disconnected;
+
+ /* If the hub has died, clean up after it */
+ if (hdev->state == USB_STATE_NOTATTACHED) {
+ hub->error = -ENODEV;
+ hub_quiesce(hub, HUB_DISCONNECT);
+ goto out;
+ }
+
+ /* Autoresume */
+ ret = usb_autopm_get_interface(intf);
+ if (ret) {
+ dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
+ goto out;
+ }

- hdev = hub->hdev;
- hub_dev = hub->intfdev;
- intf = to_usb_interface(hub_dev);
- dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
- hdev->state, hdev->maxchild,
- /* NOTE: expects max 15 ports... */
- (u16) hub->change_bits[0],
- (u16) hub->event_bits[0]);
-
- /* Lock the device, then check to see if we were
- * disconnected while waiting for the lock to succeed. */
- usb_lock_device(hdev);
- if (unlikely(hub->disconnected))
- goto loop_disconnected;
-
- /* If the hub has died, clean up after it */
- if (hdev->state == USB_STATE_NOTATTACHED) {
- hub->error = -ENODEV;
- hub_quiesce(hub, HUB_DISCONNECT);
- goto loop;
- }
+ /* If this is an inactive hub, do nothing */
+ if (hub->quiescing)
+ goto out_autopm;
+
+ if (hub->error) {
+ dev_dbg(hub_dev, "resetting for error %d\n", hub->error);

- /* Autoresume */
- ret = usb_autopm_get_interface(intf);
+ ret = usb_reset_device(hdev);
if (ret) {
- dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
- goto loop;
+ dev_dbg(hub_dev, "error resetting hub: %d\n", ret);
+ goto out_autopm;
}

- /* If this is an inactive hub, do nothing */
- if (hub->quiescing)
- goto loop_autopm;
+ hub->nerrors = 0;
+ hub->error = 0;
+ }

- if (hub->error) {
- dev_dbg (hub_dev, "resetting for error %d\n",
- hub->error);
+ /* deal with port status changes */
+ for (i = 1; i <= hdev->maxchild; i++) {
+ struct usb_port *port_dev = hub->ports[i - 1];

- ret = usb_reset_device(hdev);
- if (ret) {
- dev_dbg (hub_dev,
- "error resetting hub: %d\n", ret);
- goto loop_autopm;
- }
-
- hub->nerrors = 0;
- hub->error = 0;
+ if (test_bit(i, hub->event_bits)
+ || test_bit(i, hub->change_bits)
+ || test_bit(i, hub->wakeup_bits)) {
+ /*
+ * The get_noresume and barrier ensure that if
+ * the port was in the process of resuming, we
+ * flush that work and keep the port active for
+ * the duration of the port_event(). However,
+ * if the port is runtime pm suspended
+ * (powered-off), we leave it in that state, run
+ * an abbreviated port_event(), and move on.
+ */
+ pm_runtime_get_noresume(&port_dev->dev);
+ pm_runtime_barrier(&port_dev->dev);
+ usb_lock_port(port_dev);
+ port_event(hub, i);
+ usb_unlock_port(port_dev);
+ pm_runtime_put_sync(&port_dev->dev);
}
+ }

- /* deal with port status changes */
- for (i = 1; i <= hdev->maxchild; i++) {
- struct usb_port *port_dev = hub->ports[i - 1];
-
- if (test_bit(i, hub->event_bits)
- || test_bit(i, hub->change_bits)
- || test_bit(i, hub->wakeup_bits)) {
- /*
- * The get_noresume and barrier ensure that if
- * the port was in the process of resuming, we
- * flush that work and keep the port active for
- * the duration of the port_event(). However,
- * if the port is runtime pm suspended
- * (powered-off), we leave it in that state, run
- * an abbreviated port_event(), and move on.
- */
- pm_runtime_get_noresume(&port_dev->dev);
- pm_runtime_barrier(&port_dev->dev);
- usb_lock_port(port_dev);
- port_event(hub, i);
- usb_unlock_port(port_dev);
- pm_runtime_put_sync(&port_dev->dev);
- }
+ /* deal with hub status changes */
+ if (test_and_clear_bit(0, hub->event_bits) == 0)
+ ; /* do nothing */
+ else if (hub_hub_status(hub, &hubstatus, &hubchange) < 0)
+ dev_err(hub_dev, "get_hub_status failed\n");
+ else {
+ if (hubchange & HUB_CHANGE_LOCAL_POWER) {
+ dev_dbg(hub_dev, "power change\n");
+ clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
+ if (hubstatus & HUB_STATUS_LOCAL_POWER)
+ /* FIXME: Is this always true? */
+ hub->limited_power = 1;
+ else
+ hub->limited_power = 0;
}
+ if (hubchange & HUB_CHANGE_OVERCURRENT) {
+ u16 status = 0;
+ u16 unused;

- /* deal with hub status changes */
- if (test_and_clear_bit(0, hub->event_bits) == 0)
- ; /* do nothing */
- else if (hub_hub_status(hub, &hubstatus, &hubchange) < 0)
- dev_err (hub_dev, "get_hub_status failed\n");
- else {
- if (hubchange & HUB_CHANGE_LOCAL_POWER) {
- dev_dbg (hub_dev, "power change\n");
- clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
- if (hubstatus & HUB_STATUS_LOCAL_POWER)
- /* FIXME: Is this always true? */
- hub->limited_power = 1;
- else
- hub->limited_power = 0;
- }
- if (hubchange & HUB_CHANGE_OVERCURRENT) {
- u16 status = 0;
- u16 unused;
-
- dev_dbg(hub_dev, "over-current change\n");
- clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
- msleep(500); /* Cool down */
- hub_power_on(hub, true);
- hub_hub_status(hub, &status, &unused);
- if (status & HUB_STATUS_OVERCURRENT)
- dev_err(hub_dev, "over-current "
- "condition\n");
- }
+ dev_dbg(hub_dev, "over-current change\n");
+ clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
+ msleep(500); /* Cool down */
+ hub_power_on(hub, true);
+ hub_hub_status(hub, &status, &unused);
+ if (status & HUB_STATUS_OVERCURRENT)
+ dev_err(hub_dev, "over-current condition\n");
}
+ }

- loop_autopm:
- /* Balance the usb_autopm_get_interface() above */
- usb_autopm_put_interface_no_suspend(intf);
- loop:
- /* Balance the usb_autopm_get_interface_no_resume() in
- * kick_khubd() and allow autosuspend.
- */
- usb_autopm_put_interface(intf);
- loop_disconnected:
- usb_unlock_device(hdev);
- kref_put(&hub->kref, hub_release);
-
- } /* end while (1) */
+out_autopm:
+ /* Balance the usb_autopm_get_interface() above */
+ usb_autopm_put_interface_no_suspend(intf);
+out:
+ /* Balance the usb_autopm_get_interface_no_resume() in
+ * kick_khubd() and allow autosuspend.
+ */
+ usb_autopm_put_interface(intf);
+out_disconnected:
+ usb_unlock_device(hdev);
+ kref_put(&hub->kref, hub_release);
}

static int hub_thread(void *__unused)
@@ -5156,7 +5142,7 @@ static int hub_thread(void *__unused)
set_freezable();

do {
- hub_events();
+ hub_event();
wait_event_freezable(khubd_wait,
!list_empty(&hub_event_list) ||
kthread_should_stop());
--
1.8.4


\
 
 \ /
  Last update: 2014-09-19 18:01    [W:0.220 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site