lkml.org 
[lkml]   [2014]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6 chips
On Wed, Sep 17, 2014 at 05:57:58PM +0800, Robin Gong wrote:
> All chips of i.mx6 can be powered off by programming SNVS.
> For example :
> On i.mx6q-sabresd board, PMIC_ON_REQ connect with external
> pmic ON/OFF pin, that will cause the whole PMIC powered off
> except VSNVS. And system can restart once PMIC_ON_REQ goes
> high by push POWRER key.
>
> Signed-off-by: Robin Gong <b38343@freescale.com>
> ---
> arch/arm/boot/dts/imx6qdl.dtsi | 5 +++++
> arch/arm/boot/dts/imx6sl.dtsi | 5 +++++
> arch/arm/boot/dts/imx6sx.dtsi | 5 +++++
> 3 files changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index c701af9..fffa1c6 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -645,6 +645,11 @@
> interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
> <0 20 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + snvs-poweroff@38 {
> + compatible = "fsl,sec-v4.0-poweroff";
> + reg = <0x38 0x4>;
> + };

As said: This makes board specific assumptions on SoC level. Whether or
not this function is available is *BOARD* specific, so at SoC level this
needs a status = "disabled";

So: NACK.

Sascha

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2014-09-17 13:01    [W:0.063 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site