lkml.org 
[lkml]   [2014]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [RFC PATCH for AMD Seattle 0/4] Drivers for AMD-Seatlle to boot from ACPI
    Note: Correcting the typo for linux-acpi mailing list in this reply.

    Also, I would like to add the link to the "AMD Opteron™ A1100 Series
    Processor ACPI Porting Guide", which describes the current ACPI table
    for AMD Seattle platform here:

    http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/Seattle_ACPI_Guide.pdf

    Suravee

    On 09/15/2014 07:47 PM, suravee.suthikulpanit@amd.com wrote:
    > From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
    >
    > As a follow up of the email thread:
    >
    > [PATCH v3 00/17] Introduce ACPI for ARM64 based on ACPI 5.1
    > https://lkml.org/lkml/2014/9/1/446
    >
    > Besides Hanjun Guo's patches above, these are the additional patches required
    > to boot AMD Seattle platform with full ACPI support:
    >
    > [PATCH] efi/arm64: efistub: don't abort if base of DRAM is occupied
    > http://lists.infradead.org/pipermail/linux-arm-kernel/2014-July/272274.html
    >
    > [PATCH v2] efi/arm64: fix fdt-related memory reservation
    > https://lkml.org/lkml/2014/9/8/483
    >
    > [PATCH] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
    > https://lkml.org/lkml/2014/9/9/834
    >
    > [RFC PATCH for Juno 2/2] tty: SBSA compatible UART
    > https://lkml.org/lkml/2014/9/1/448
    > (NOTE: This is not meant to be submitted upstream, but required to enable
    > ACPI support for UART SBSA driver.)
    >
    > These patches are rebased from the linux-3.17-rc4 upstream kernel, and
    > compatible with the AMD Seattle Firmware version ROD0070C.
    > The full kernel boot log can be found here:
    >
    > http://people.linaro.org/~al.stone/seattle-boot-acpi-dmesg.txt
    >
    > Suravee / Al
    >
    > Ard Biesheuvel (1):
    > arm64/efi: efistub: don't abort if base of DRAM is occupied
    >
    > Grame Gregory (1):
    > [RFC PATCH for Juno 2/2] tty: SBSA compatible UART
    >
    > Mark Salter (1):
    > efi/arm64: fix fdt-related memory reservation
    >
    > Suravee Suthikulpanit (1):
    > ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller
    >
    > arch/arm64/kernel/efi-stub.c | 16 +-
    > arch/arm64/mm/init.c | 3 +-
    > drivers/ata/Kconfig | 2 +-
    > drivers/ata/ahci_platform.c | 13 ++
    > drivers/firmware/efi/libstub/fdt.c | 10 +-
    > drivers/tty/Kconfig | 6 +
    > drivers/tty/Makefile | 1 +
    > drivers/tty/sbsauart.c | 328 +++++++++++++++++++++++++++++++++++++
    > 8 files changed, 365 insertions(+), 14 deletions(-)
    > create mode 100644 drivers/tty/sbsauart.c
    >
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2014-09-16 08:41    [W:4.850 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site