Messages in this thread | | | Date | Thu, 11 Sep 2014 09:09:25 +0800 | From | Peter Chen <> | Subject | Re: [PATCH v4 08/12] Documentation: bindings: add doc for the USB2 ChipIdea USB driver |
| |
On Wed, Sep 03, 2014 at 09:48:27AM +0200, Antoine Tenart wrote: > Document the USB2 ChipIdea driver (ci13xxx) bindings. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> > --- > .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > new file mode 100644 > index 000000000000..8dd6d8285dab > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > @@ -0,0 +1,22 @@ > +* USB2 ChipIdea USB controller for ci13xxx > + > +Required properties: > +- compatible: should be "chipidea,usb2" > +- reg: base address and length of the registers > +- interrupts: interrupt for the USB controller > + > +Optional properties: > +- clocks: reference to the USB clock > +- phys: reference to the USB PHY > +- vbus-supply: reference to the VBUS regulator > + > +Example: > + > + usb@f7ed0000 { > + compatible = "chipidea,usb2"; > + reg = <0xf7ed0000 0x10000>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&chip CLKID_USB0>; > + phys = <&usb_phy0>; > + vbus-supply = <®_usb0_vbus>; > + }; > -- > 1.9.1 >
This one is ok for me.
-- Best Regards, Peter Chen
| |