lkml.org 
[lkml]   [2014]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4 v3] GPIO: gpio-dwapb: Enable platform driver binding to MFD driver
On Tue, 9 Sep 2014, Weike Chen wrote:

> The Synopsys DesignWare APB GPIO driver only supports open firmware devices.
> But, like Intel Quark X1000 SOC, which has a single PCI function exporting
> a GPIO and an I2C controller, it is a Multifunction device. This patch is
> to enable the current Synopsys DesignWare APB GPIO driver to support the
> Multifunction device which exports the designware GPIO controller.
>
> Reviewed-by: Hock Leong Kweh <hock.leong.kweh@intel.com>
> Signed-off-by: Weike Chen <alvin.chen@intel.com>

Hi Alvin,

I did a quick test and this looks like it works for me (with device tree).
I had a couple of small fixes below.

Alan

>
> - port->bgc.gc.ngpio = ngpio;
> - port->bgc.gc.of_node = port_np;
> +#ifdef CONFIG_OF_GPIO
> + port->bgc.gc.of_node = pp->node;
> +#endif

Please use 'if (IS_ENABLED(CONFIG_OF_GPIO)) as a conditional as you do
elsewhere.

> static int dwapb_gpio_probe(struct platform_device *pdev)
> {
> + int i;
> struct resource *res;
> struct dwapb_gpio *gpio;
> - struct device_node *np;
> int err;
> - unsigned int offs = 0;
> + struct device *dev = &pdev->dev;
> + struct dwapb_platform_data *pdata = dev_get_platdata(dev);
> + bool is_pdata_alloc = !pdata;

Please combine the int's in one line (int err, i;) and put them as
the last one on this list. It looks the same to the compiler of
course, but more uniform for human eyes :)



\
 
 \ /
  Last update: 2014-09-10 22:01    [W:0.306 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site