lkml.org 
[lkml]   [2014]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] tty: serial: serial_mctrl_gpio: Fix build error for !GPIOLIB
On Wed, Sep 10, 2014 at 10:06:58AM +0200, Tobias Klauser wrote:
> If SERIAL_MCTRL_GPIO is selected but GPIOLIB is not, the noop functions
> from serial_mctrl_gpio.h are pulled in. However, serial_mctrl_gpio.c is
> still compiled, leading to function redefinition build errors. Since all
> drivers that include serial_mctrl_gpio.h also depend on
> SERIAL_MCTRL_GPIO, let it depend on GPIOLIB as well remove the noop
> functions alltogether.
>
> Reported-by: Jim Davis <jim.epost@gmail.com>
> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
> ---
> drivers/tty/serial/Kconfig | 1 +
> drivers/tty/serial/serial_mctrl_gpio.h | 35 ----------------------------------
> 2 files changed, 1 insertion(+), 35 deletions(-)

I fixed this yesterday with commit below from Alexander, which does
things a bit differently than you. Any objections to it?

thanks,

greg k-h
From efb089517d2f34a58aceb600ab58b0ca3db1fa07 Mon Sep 17 00:00:00 2001
From: Alexander Shiyan <shc_work@mail.ru>
Date: Tue, 9 Sep 2014 08:14:36 +0400
Subject: serial: clps711x: Fix COMPILE_TEST build for target without GPIOLIB
support

The patch fixes the following build error of CLPS711X serial driver for
targets without GPIOLIB support:

>> drivers/tty/serial/serial_mctrl_gpio.c:44:6: error: redefinition of 'mctrl_gpio_set'
void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
^
In file included from drivers/tty/serial/serial_mctrl_gpio.c:23:0:
drivers/tty/serial/serial_mctrl_gpio.h:80:6: note: previous definition of 'mctrl_gpio_set' was here
void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
^

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 8079f5225575..81f6ee7d4223 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -222,7 +222,7 @@ config SERIAL_CLPS711X
tristate "CLPS711X serial port support"
depends on ARCH_CLPS711X || COMPILE_TEST
select SERIAL_CORE
- select SERIAL_MCTRL_GPIO
+ select SERIAL_MCTRL_GPIO if GPIOLIB
help
This enables the driver for the on-chip UARTs of the Cirrus
Logic EP711x/EP721x/EP731x processors.
--
2.1.0
\
 
 \ /
  Last update: 2014-09-10 16:21    [W:0.074 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site