lkml.org 
[lkml]   [2014]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v3 0/7] Add max77802 support for Peach boards
    Date
    Hello Kukjin,

    This is a third version of th series that adds max77802 support for
    the Peach Pit and Pi boards. The series also have all the pending
    patches that were posted but depended on this support. I've picked
    all the patches I found and rebased them to be sure that they apply
    cleanly on top of linux-next. Also I've taken some DT snippets from
    the downstream Chrome OS 3.8 kernel DTS for devices that use one of
    these regulators as their input supply.

    Changes since v2 [0]:
    - Remove left over supply on ldo35 regulator, suggested by Doug Anderson.
    - Add a patch to change the i2c7 clock at 400kHz, suggested by Doug Anderson.
    - Add a patch from Vivek Gautam to enable max77802 regulator driver support.

    Changes sinve v1 [1]:
    - Dropped patch that added vmmc and vqmmc supplies as suggested
    by Doug Anderson.
    - Use IRQ flags define instead of a magic number as suggested by
    Andreas Faerber.

    The series is composed of the following patches:

    Javier Martinez Canillas (3):
    ARM: dts: Add Peach Pit and Pi dts entry for max77802 PMIC
    ARM: dts: Add Peach Pit and Pi dts entry for ISL29018 sensor
    ARM: dts: Set i2c7 clock at 400kHz for Peach boards

    Naveen Krishna Chatradhi (1):
    ARM: dts: Add thermistor dts fragment used by exynos based Peach
    boards

    Rahul Sharma (2):
    ARM: dts: add hdmi regulators for exynos5800 based peach-pi board
    ARM: dts: add hdmi regulators for exynos5420 based peach-pit board

    Vivek Gautam (1):
    ARM: exynos_defconfig: Enable MAX77802

    arch/arm/boot/dts/cros-adc-thermistors.dtsi | 44 ++++
    arch/arm/boot/dts/exynos5420-peach-pit.dts | 389 ++++++++++++++++++++++++++++
    arch/arm/boot/dts/exynos5800-peach-pi.dts | 389 ++++++++++++++++++++++++++++
    arch/arm/configs/exynos_defconfig | 3 +
    4 files changed, 825 insertions(+)
    create mode 100644 arch/arm/boot/dts/cros-adc-thermistors.dtsi


    Best regards,
    Javier

    [0]: https://lkml.org/lkml/2014/8/20/225
    [1]: https://lkml.org/lkml/2014/8/19/372


    \
     
     \ /
      Last update: 2014-09-10 13:01    [W:4.588 / U:0.080 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site