Messages in this thread | | | Date | Mon, 1 Sep 2014 12:05:05 +0300 | Subject | Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices | From | Octavian Purdila <> |
| |
On Mon, Sep 1, 2014 at 11:37 AM, Lee Jones <lee.jones@linaro.org> wrote: > On Sat, 30 Aug 2014, Octavian Purdila wrote: > >> This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO >> Master Adapter DLN-2. Details about the device can be found here: >> >> https://www.diolan.com/i2c/i2c_interface.html. >> >> Information about the USB protocol can be found in the Programmer's >> Reference Manual [1], see section 1.7. >> >> Because the hardware has a single transmit endpoint and a single >> receive endpoint the communication between the various DLN2 drivers >> and the hardware will be muxed/demuxed by this driver. >> >> Each DLN2 module will be identified by the handle field within the DLN2 >> message header. If a DLN2 module issues multiple commands in parallel >> they will be identified by the echo counter field in the message header. >> >> The DLN2 modules can use the dln2_transfer() function to issue a >> command and wait for its response. They can also register a callback >> that is going to be called when a specific event id is generated by >> the device (e.g. GPIO interrupts). The device uses handle 0 for >> sending events. >> >> [1] https://www.diolan.com/downloads/dln-api-manual.pdf > > MFD is not a dumping ground for misfit h/w. Almost all of this code > looks like it belongs in drivers/usb. Please move it there. >
Hi Lee,
We initially submitted this driver as a pure USB driver, with our own module registration mechanism, but during the first round of reviews people pointed out that a MFD driver is the better approach, and I agree. I also see that there are already a couple of USB drivers implemented as MFD drivers.
Do you see a better approach?
Thanks, Tavi
| |