lkml.org 
[lkml]   [2014]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/15] pinctrl: pinctrl-at91.c: fix decimal printf format specifiers prefixed with 0x
On 05/08/2014 at 21:43:16 -0700, Hans Wennborg wrote :
> The prefix suggests the number should be printed in hex, so use
> the %x specifier to do that.
>
> Found by using regex suggested by Joe Perches.
>
> Signed-off-by: Hans Wennborg <hans@hanshq.net>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

> ---
> drivers/pinctrl/pinctrl-at91.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index af1ba4f..60464a2 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -497,10 +497,10 @@ static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
> static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin)
> {
> if (pin->mux) {
> - dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lu\n",
> + dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lx\n",
> pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf);
> } else {
> - dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lu\n",
> + dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lx\n",
> pin->bank + 'A', pin->pin, pin->conf);
> }
> }
> --
> 2.0.0.526.g5318336
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2014-08-06 10:01    [W:0.067 / U:1.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site