lkml.org 
[lkml]   [2014]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ASoC: fsl_sai: Add asynchronous mode support
On 08/05/2014 01:02 PM, Nicolin Chen wrote:
> From: Nicolin Chen <Guangyu.Chen@freescale.com>
>
> SAI supports these operation modes:
> 1) asynchronous mode
> Both Tx and Rx are set to be asynchronous.
> 2) synchronous mode (Rx sync with Tx)
> Tx is set to be asynchronous, Rx is set to be synchronous.
> 3) synchronous mode (Tx sync with Rx)
> Rx is set to be asynchronous, Tx is set to be synchronous.
> 4) synchronous mode (Tx/Rx sync with another SAI's Tx)
> 5) synchronous mode (Tx/Rx sync with another SAI's Rx)
>
> * 4) and 5) are beyond this patch because they are related with another SAI.
>
> As the initial version of this SAI driver, it supported 2) as default while
> the others were totally missing.
>
> So this patch just adds supports for 1) and 3).
>
> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> ---
> .../devicetree/bindings/sound/fsl-sai.txt | 16 ++++++++++++
> sound/soc/fsl/fsl_sai.c | 30 +++++++++++++++++++---
> sound/soc/fsl/fsl_sai.h | 4 +++
> 3 files changed, 46 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> index 0f4e238..77864f4 100644
> --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> @@ -24,6 +24,22 @@ Required properties:
> - big-endian-data: If this property is absent, the little endian mode will
> be in use as default, or the big endian mode will be in use for all the
> fifo data.
> +- fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
> + that SAI will work in the synchronous mode (sync Tx with Rx) which means
> + both the transimitter and receiver will send and receive data by following
> + receiver's bit clocks and frame sync clocks.
> +- fsl,sai-asynchronous: This is a boolean property. If present, indicating
> + that SAI will work in the asynchronous mode, which means both transimitter
> + and receiver will send and receive data by following their own bit clocks
> + and frame sync clocks separately.
>
Would be readable if it like this...

fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
that SAI will work in the synchronous mode (sync Tx with Rx) which means
both the transimitter and receiver will send and receive data by following
receiver's bit clocks and frame sync clocks.
- fsl,sai-asynchronous: This is a boolean property. If present, indicating
that SAI will work in the asynchronous mode, which means both transimitter
and receiver will send and receive data by following their own bit clocks
and frame sync clocks separately.
.....

--
Regards,
Varka Bhadram.



\
 
 \ /
  Last update: 2014-08-05 13:41    [W:0.072 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site