lkml.org 
[lkml]   [2014]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/11] mfd: twl4030-irq: Check return value from twl_i2c_write() - warn() on failure
Date
In the original code a return value variable was provided, but it
was never checked and the user was never informed of failure. Now
it is and they are.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mfd/twl4030-irq.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index b1dabba..1b772ef 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -396,13 +396,17 @@ static int twl4030_init_sih_modules(unsigned line)
status = twl_i2c_read(sih->module, rxbuf,
sih->mask[line].isr_offset, sih->bytes_ixr);
if (status < 0)
- pr_err("twl4030: err %d initializing %s %s\n",
+ pr_warn("twl4030: err %d initializing %s %s\n",
status, sih->name, "ISR");

- if (!sih->set_cor)
+ if (!sih->set_cor) {
status = twl_i2c_write(sih->module, buf,
sih->mask[line].isr_offset,
sih->bytes_ixr);
+ if (status < 0)
+ pr_warn("twl4030: write failed: %d\n",
+ status);
+ }
/*
* else COR=1 means read sufficed.
* (for most SIH modules...)
--
1.9.1


\
 
 \ /
  Last update: 2014-08-28 15:21    [W:0.070 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site