lkml.org 
[lkml]   [2014]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 08/10] ARM: OMAP5/DRA7: PM: cpuidle MPU CSWR support
Date
+ Daniel (cpuidle maintainer)

Nishanth Menon <nm@ti.com> writes:

> From: Santosh Shilimkar <santosh.shilimkar@ti.com>
>
> Add OMAP5/DRA74/72 CPUIDLE support.
>
> This patch adds MPUSS low power states in cpuidle.
>
> C1 - CPU0 WFI + CPU1 WFI + MPU ON
> C2 - CPU0 RET + CPU1 RET + MPU CSWR
>
> Tested on DRA74/72-EVM for C1 and C2 states.
>
> NOTE: DRA7 does not do voltage scaling as part of retention transition
> and has Mercury which speeds up transition paths - Latency numbers are
> based on measurements done by toggling GPIOs.
>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> [ j-keerthy@ti.com rework on 3.14]
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> [nm@ti.com: updates based on profiling, OMAP5 squashed]
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> arch/arm/mach-omap2/cpuidle44xx.c | 82 ++++++++++++++++++++++++++++++++++++-
> arch/arm/mach-omap2/pm44xx.c | 2 +-
> 2 files changed, 82 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
> index 2498ab0..8ad4f44 100644
> --- a/arch/arm/mach-omap2/cpuidle44xx.c
> +++ b/arch/arm/mach-omap2/cpuidle44xx.c
> @@ -22,6 +22,7 @@
> #include "common.h"
> #include "pm.h"
> #include "prm.h"
> +#include "soc.h"
> #include "clockdomain.h"
>
> #define MAX_CPUS 2
> @@ -31,6 +32,7 @@ struct idle_statedata {
> u32 cpu_state;
> u32 mpu_logic_state;
> u32 mpu_state;
> + u32 mpu_state_vote;
> };
>
> static struct idle_statedata omap4_idle_data[] = {
> @@ -51,12 +53,26 @@ static struct idle_statedata omap4_idle_data[] = {
> },
> };
>
> +static struct idle_statedata dra7_idle_data[] = {
> + {
> + .cpu_state = PWRDM_POWER_ON,
> + .mpu_state = PWRDM_POWER_ON,
> + .mpu_logic_state = PWRDM_POWER_ON,
> + },
> + {
> + .cpu_state = PWRDM_POWER_RET,
> + .mpu_state = PWRDM_POWER_RET,
> + .mpu_logic_state = PWRDM_POWER_RET,
> + },
> +};
> +
> static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS];
> static struct clockdomain *cpu_clkdm[MAX_CPUS];
>
> static atomic_t abort_barrier;
> static bool cpu_done[MAX_CPUS];
> static struct idle_statedata *state_ptr = &omap4_idle_data[0];
> +static DEFINE_RAW_SPINLOCK(mpu_lock);
>
> /* Private functions */
>
> @@ -78,6 +94,32 @@ static int omap_enter_idle_simple(struct cpuidle_device *dev,
> return index;
> }
>
> +static int omap_enter_idle_smp(struct cpuidle_device *dev,
> + struct cpuidle_driver *drv,
> + int index)
> +{
> + struct idle_statedata *cx = state_ptr + index;
> + unsigned long flag;
> +
> + raw_spin_lock_irqsave(&mpu_lock, flag);
> + cx->mpu_state_vote++;
> + if (cx->mpu_state_vote == num_online_cpus()) {
> + pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
> + omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
> + }
> + raw_spin_unlock_irqrestore(&mpu_lock, flag);
> +
> + omap4_enter_lowpower(dev->cpu, cx->cpu_state);
> +
> + raw_spin_lock_irqsave(&mpu_lock, flag);
> + if (cx->mpu_state_vote == num_online_cpus())
> + omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
> + cx->mpu_state_vote--;
> + raw_spin_unlock_irqrestore(&mpu_lock, flag);
> +
> + return index;
> +}

Hmm, maybe OMAP5/DRA7 CPUidle driver should be a new one based on MCPM?

Kevin


\
 
 \ /
  Last update: 2014-08-27 21:21    [W:0.265 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site