Messages in this thread | | | Date | Wed, 27 Aug 2014 16:16:08 +0200 | From | Hannes Reinecke <> | Subject | Re: [RFC PATCH 09/10] scsi/trace: Add additional sense code and additional sense code qualifier to scsi_print_sense trace point |
| |
On 08/08/2014 01:50 PM, Yoshihiro YUNOMAE wrote: > There are no mean that additional sense code and additional sense code qualifier > are output as different messages of sense key, so those information are added. > > Note: > scsi_show_extd_sense() is changed from export symbol to non-export symbol. > > - Result examples > > <Before> (printk) > sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error > > <After> (ftrace, merged into scsi_print_sense traceevent) > scsi_print_sense: host_no=2 channel=0 id=0 lun=0 [sda] Sense Key (Medium Error [current]) Add. Sense (Unrecovered read error) > > Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> > Cc: Hannes Reinecke <hare@suse.de> > Cc: Doug Gilbert <dgilbert@interlog.com> > Cc: Martin K. Petersen <martin.petersen@oracle.com> > Cc: Christoph Hellwig <hch@lst.de> > Cc: "James E.J. Bottomley" <JBottomley@parallels.com> > Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> > Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> > --- > drivers/scsi/constants.c | 932 ------------------------------------------- > drivers/scsi/scsi_trace.c | 920 ++++++++++++++++++++++++++++++++++++++++++ > include/scsi/scsi_dbg.h | 2 > include/trace/events/scsi.h | 10 > 4 files changed, 928 insertions(+), 936 deletions(-) > > diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c > index 85b75c8..ce9ceb8 100644 > --- a/drivers/scsi/constants.c > +++ b/drivers/scsi/constants.c > @@ -14,12 +14,6 @@ > > #include <scsi/scsi.h> > #include <scsi/scsi_cmnd.h> > -#include <scsi/scsi_device.h> > -#include <scsi/scsi_host.h> > -#include <scsi/scsi_eh.h> > -#include <scsi/scsi_dbg.h> > - > -#include <trace/events/scsi.h> > > /* Commands with service actions that change the command name */ > #define SERVICE_ACTION_IN_12 0xab > @@ -429,929 +423,3 @@ void scsi_print_command(struct scsi_cmnd *cmd) > print_opcode_name(cmd->device, devname, cmd->cmnd, cmd->cmd_len); > } > EXPORT_SYMBOL(scsi_print_command); > - > -#ifdef CONFIG_SCSI_CONSTANTS > - > -struct error_info { > - unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */ > - const char * text; > -}; > - > -/* > - * The canonical list of T10 Additional Sense Codes is available at: > - * http://www.t10.org/lists/asc-num.txt [most recent: 20130605] > - */ > - > -static const struct error_info additional[] = > -{ > - {0x0000, "No additional sense information"}, > - {0x0001, "Filemark detected"}, > - {0x0002, "End-of-partition/medium detected"}, > - {0x0003, "Setmark detected"}, > - {0x0004, "Beginning-of-partition/medium detected"}, > - {0x0005, "End-of-data detected"}, > - {0x0006, "I/O process terminated"}, > - {0x0007, "Programmable early warning detected"}, > - {0x0011, "Audio play operation in progress"}, > - {0x0012, "Audio play operation paused"}, > - {0x0013, "Audio play operation successfully completed"}, > - {0x0014, "Audio play operation stopped due to error"}, > - {0x0015, "No current audio status to return"}, > - {0x0016, "Operation in progress"}, > - {0x0017, "Cleaning requested"}, > - {0x0018, "Erase operation in progress"}, > - {0x0019, "Locate operation in progress"}, > - {0x001A, "Rewind operation in progress"}, > - {0x001B, "Set capacity operation in progress"}, > - {0x001C, "Verify operation in progress"}, > - {0x001D, "ATA pass through information available"}, > - {0x001E, "Conflicting SA creation request"}, > - {0x001F, "Logical unit transitioning to another power condition"}, > - {0x0020, "Extended copy information available"}, > - > - {0x0100, "No index/sector signal"}, > - > - {0x0200, "No seek complete"}, > - > - {0x0300, "Peripheral device write fault"}, > - {0x0301, "No write current"}, > - {0x0302, "Excessive write errors"}, > - > - {0x0400, "Logical unit not ready, cause not reportable"}, > - {0x0401, "Logical unit is in process of becoming ready"}, > - {0x0402, "Logical unit not ready, initializing command required"}, > - {0x0403, "Logical unit not ready, manual intervention required"}, > - {0x0404, "Logical unit not ready, format in progress"}, > - {0x0405, "Logical unit not ready, rebuild in progress"}, > - {0x0406, "Logical unit not ready, recalculation in progress"}, > - {0x0407, "Logical unit not ready, operation in progress"}, > - {0x0408, "Logical unit not ready, long write in progress"}, > - {0x0409, "Logical unit not ready, self-test in progress"}, > - {0x040A, "Logical unit not accessible, asymmetric access state " > - "transition"}, > - {0x040B, "Logical unit not accessible, target port in standby state"}, > - {0x040C, "Logical unit not accessible, target port in unavailable " > - "state"}, > - {0x040D, "Logical unit not ready, structure check required"}, > - {0x0410, "Logical unit not ready, auxiliary memory not accessible"}, > - {0x0411, "Logical unit not ready, notify (enable spinup) required"}, > - {0x0412, "Logical unit not ready, offline"}, > - {0x0413, "Logical unit not ready, SA creation in progress"}, > - {0x0414, "Logical unit not ready, space allocation in progress"}, > - {0x0415, "Logical unit not ready, robotics disabled"}, > - {0x0416, "Logical unit not ready, configuration required"}, > - {0x0417, "Logical unit not ready, calibration required"}, > - {0x0418, "Logical unit not ready, a door is open"}, > - {0x0419, "Logical unit not ready, operating in sequential mode"}, > - {0x041A, "Logical unit not ready, start stop unit command in " > - "progress"}, > - {0x041B, "Logical unit not ready, sanitize in progress"}, > - {0x041C, "Logical unit not ready, additional power use not yet " > - "granted"}, > - {0x041D, "Logical unit not ready, configuration in progress"}, > - > - {0x0500, "Logical unit does not respond to selection"}, > - > - {0x0600, "No reference position found"}, > - > - {0x0700, "Multiple peripheral devices selected"}, > - > - {0x0800, "Logical unit communication failure"}, > - {0x0801, "Logical unit communication time-out"}, > - {0x0802, "Logical unit communication parity error"}, > - {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"}, > - {0x0804, "Unreachable copy target"}, > - > - {0x0900, "Track following error"}, > - {0x0901, "Tracking servo failure"}, > - {0x0902, "Focus servo failure"}, > - {0x0903, "Spindle servo failure"}, > - {0x0904, "Head select fault"}, > - > - {0x0A00, "Error log overflow"}, > - > - {0x0B00, "Warning"}, > - {0x0B01, "Warning - specified temperature exceeded"}, > - {0x0B02, "Warning - enclosure degraded"}, > - {0x0B03, "Warning - background self-test failed"}, > - {0x0B04, "Warning - background pre-scan detected medium error"}, > - {0x0B05, "Warning - background medium scan detected medium error"}, > - {0x0B06, "Warning - non-volatile cache now volatile"}, > - {0x0B07, "Warning - degraded power to non-volatile cache"}, > - {0x0B08, "Warning - power loss expected"}, > - {0x0B09, "Warning - device statistics notification active"}, > - > - {0x0C00, "Write error"}, > - {0x0C01, "Write error - recovered with auto reallocation"}, > - {0x0C02, "Write error - auto reallocation failed"}, > - {0x0C03, "Write error - recommend reassignment"}, > - {0x0C04, "Compression check miscompare error"}, > - {0x0C05, "Data expansion occurred during compression"}, > - {0x0C06, "Block not compressible"}, > - {0x0C07, "Write error - recovery needed"}, > - {0x0C08, "Write error - recovery failed"}, > - {0x0C09, "Write error - loss of streaming"}, > - {0x0C0A, "Write error - padding blocks added"}, > - {0x0C0B, "Auxiliary memory write error"}, > - {0x0C0C, "Write error - unexpected unsolicited data"}, > - {0x0C0D, "Write error - not enough unsolicited data"}, > - {0x0C0E, "Multiple write errors"}, > - {0x0C0F, "Defects in error window"}, > - > - {0x0D00, "Error detected by third party temporary initiator"}, > - {0x0D01, "Third party device failure"}, > - {0x0D02, "Copy target device not reachable"}, > - {0x0D03, "Incorrect copy target device type"}, > - {0x0D04, "Copy target device data underrun"}, > - {0x0D05, "Copy target device data overrun"}, > - > - {0x0E00, "Invalid information unit"}, > - {0x0E01, "Information unit too short"}, > - {0x0E02, "Information unit too long"}, > - {0x0E03, "Invalid field in command information unit"}, > - > - {0x1000, "Id CRC or ECC error"}, > - {0x1001, "Logical block guard check failed"}, > - {0x1002, "Logical block application tag check failed"}, > - {0x1003, "Logical block reference tag check failed"}, > - {0x1004, "Logical block protection error on recover buffered data"}, > - {0x1005, "Logical block protection method error"}, > - > - {0x1100, "Unrecovered read error"}, > - {0x1101, "Read retries exhausted"}, > - {0x1102, "Error too long to correct"}, > - {0x1103, "Multiple read errors"}, > - {0x1104, "Unrecovered read error - auto reallocate failed"}, > - {0x1105, "L-EC uncorrectable error"}, > - {0x1106, "CIRC unrecovered error"}, > - {0x1107, "Data re-synchronization error"}, > - {0x1108, "Incomplete block read"}, > - {0x1109, "No gap found"}, > - {0x110A, "Miscorrected error"}, > - {0x110B, "Unrecovered read error - recommend reassignment"}, > - {0x110C, "Unrecovered read error - recommend rewrite the data"}, > - {0x110D, "De-compression CRC error"}, > - {0x110E, "Cannot decompress using declared algorithm"}, > - {0x110F, "Error reading UPC/EAN number"}, > - {0x1110, "Error reading ISRC number"}, > - {0x1111, "Read error - loss of streaming"}, > - {0x1112, "Auxiliary memory read error"}, > - {0x1113, "Read error - failed retransmission request"}, > - {0x1114, "Read error - lba marked bad by application client"}, > - {0x1115, "Write after sanitize required"}, > - > - {0x1200, "Address mark not found for id field"}, > - > - {0x1300, "Address mark not found for data field"}, > - > - {0x1400, "Recorded entity not found"}, > - {0x1401, "Record not found"}, > - {0x1402, "Filemark or setmark not found"}, > - {0x1403, "End-of-data not found"}, > - {0x1404, "Block sequence error"}, > - {0x1405, "Record not found - recommend reassignment"}, > - {0x1406, "Record not found - data auto-reallocated"}, > - {0x1407, "Locate operation failure"}, > - > - {0x1500, "Random positioning error"}, > - {0x1501, "Mechanical positioning error"}, > - {0x1502, "Positioning error detected by read of medium"}, > - > - {0x1600, "Data synchronization mark error"}, > - {0x1601, "Data sync error - data rewritten"}, > - {0x1602, "Data sync error - recommend rewrite"}, > - {0x1603, "Data sync error - data auto-reallocated"}, > - {0x1604, "Data sync error - recommend reassignment"}, > - > - {0x1700, "Recovered data with no error correction applied"}, > - {0x1701, "Recovered data with retries"}, > - {0x1702, "Recovered data with positive head offset"}, > - {0x1703, "Recovered data with negative head offset"}, > - {0x1704, "Recovered data with retries and/or circ applied"}, > - {0x1705, "Recovered data using previous sector id"}, > - {0x1706, "Recovered data without ECC - data auto-reallocated"}, > - {0x1707, "Recovered data without ECC - recommend reassignment"}, > - {0x1708, "Recovered data without ECC - recommend rewrite"}, > - {0x1709, "Recovered data without ECC - data rewritten"}, > - > - {0x1800, "Recovered data with error correction applied"}, > - {0x1801, "Recovered data with error corr. & retries applied"}, > - {0x1802, "Recovered data - data auto-reallocated"}, > - {0x1803, "Recovered data with CIRC"}, > - {0x1804, "Recovered data with L-EC"}, > - {0x1805, "Recovered data - recommend reassignment"}, > - {0x1806, "Recovered data - recommend rewrite"}, > - {0x1807, "Recovered data with ECC - data rewritten"}, > - {0x1808, "Recovered data with linking"}, > - > - {0x1900, "Defect list error"}, > - {0x1901, "Defect list not available"}, > - {0x1902, "Defect list error in primary list"}, > - {0x1903, "Defect list error in grown list"}, > - > - {0x1A00, "Parameter list length error"}, > - > - {0x1B00, "Synchronous data transfer error"}, > - > - {0x1C00, "Defect list not found"}, > - {0x1C01, "Primary defect list not found"}, > - {0x1C02, "Grown defect list not found"}, > - > - {0x1D00, "Miscompare during verify operation"}, > - {0x1D01, "Miscompare verify of unmapped LBA"}, > - > - {0x1E00, "Recovered id with ECC correction"}, > - > - {0x1F00, "Partial defect list transfer"}, > - > - {0x2000, "Invalid command operation code"}, > - {0x2001, "Access denied - initiator pending-enrolled"}, > - {0x2002, "Access denied - no access rights"}, > - {0x2003, "Access denied - invalid mgmt id key"}, > - {0x2004, "Illegal command while in write capable state"}, > - {0x2005, "Obsolete"}, > - {0x2006, "Illegal command while in explicit address mode"}, > - {0x2007, "Illegal command while in implicit address mode"}, > - {0x2008, "Access denied - enrollment conflict"}, > - {0x2009, "Access denied - invalid LU identifier"}, > - {0x200A, "Access denied - invalid proxy token"}, > - {0x200B, "Access denied - ACL LUN conflict"}, > - {0x200C, "Illegal command when not in append-only mode"}, > - > - {0x2100, "Logical block address out of range"}, > - {0x2101, "Invalid element address"}, > - {0x2102, "Invalid address for write"}, > - {0x2103, "Invalid write crossing layer jump"}, > - > - {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, > - > - {0x2300, "Invalid token operation, cause not reportable"}, > - {0x2301, "Invalid token operation, unsupported token type"}, > - {0x2302, "Invalid token operation, remote token usage not supported"}, > - {0x2303, "Invalid token operation, remote rod token creation not " > - "supported"}, > - {0x2304, "Invalid token operation, token unknown"}, > - {0x2305, "Invalid token operation, token corrupt"}, > - {0x2306, "Invalid token operation, token revoked"}, > - {0x2307, "Invalid token operation, token expired"}, > - {0x2308, "Invalid token operation, token cancelled"}, > - {0x2309, "Invalid token operation, token deleted"}, > - {0x230A, "Invalid token operation, invalid token length"}, > - > - {0x2400, "Invalid field in cdb"}, > - {0x2401, "CDB decryption error"}, > - {0x2402, "Obsolete"}, > - {0x2403, "Obsolete"}, > - {0x2404, "Security audit value frozen"}, > - {0x2405, "Security working key frozen"}, > - {0x2406, "Nonce not unique"}, > - {0x2407, "Nonce timestamp out of range"}, > - {0x2408, "Invalid XCDB"}, > - > - {0x2500, "Logical unit not supported"}, > - > - {0x2600, "Invalid field in parameter list"}, > - {0x2601, "Parameter not supported"}, > - {0x2602, "Parameter value invalid"}, > - {0x2603, "Threshold parameters not supported"}, > - {0x2604, "Invalid release of persistent reservation"}, > - {0x2605, "Data decryption error"}, > - {0x2606, "Too many target descriptors"}, > - {0x2607, "Unsupported target descriptor type code"}, > - {0x2608, "Too many segment descriptors"}, > - {0x2609, "Unsupported segment descriptor type code"}, > - {0x260A, "Unexpected inexact segment"}, > - {0x260B, "Inline data length exceeded"}, > - {0x260C, "Invalid operation for copy source or destination"}, > - {0x260D, "Copy segment granularity violation"}, > - {0x260E, "Invalid parameter while port is enabled"}, > - {0x260F, "Invalid data-out buffer integrity check value"}, > - {0x2610, "Data decryption key fail limit reached"}, > - {0x2611, "Incomplete key-associated data set"}, > - {0x2612, "Vendor specific key reference not found"}, > - > - {0x2700, "Write protected"}, > - {0x2701, "Hardware write protected"}, > - {0x2702, "Logical unit software write protected"}, > - {0x2703, "Associated write protect"}, > - {0x2704, "Persistent write protect"}, > - {0x2705, "Permanent write protect"}, > - {0x2706, "Conditional write protect"}, > - {0x2707, "Space allocation failed write protect"}, > - > - {0x2800, "Not ready to ready change, medium may have changed"}, > - {0x2801, "Import or export element accessed"}, > - {0x2802, "Format-layer may have changed"}, > - {0x2803, "Import/export element accessed, medium changed"}, > - > - {0x2900, "Power on, reset, or bus device reset occurred"}, > - {0x2901, "Power on occurred"}, > - {0x2902, "Scsi bus reset occurred"}, > - {0x2903, "Bus device reset function occurred"}, > - {0x2904, "Device internal reset"}, > - {0x2905, "Transceiver mode changed to single-ended"}, > - {0x2906, "Transceiver mode changed to lvd"}, > - {0x2907, "I_T nexus loss occurred"}, > - > - {0x2A00, "Parameters changed"}, > - {0x2A01, "Mode parameters changed"}, > - {0x2A02, "Log parameters changed"}, > - {0x2A03, "Reservations preempted"}, > - {0x2A04, "Reservations released"}, > - {0x2A05, "Registrations preempted"}, > - {0x2A06, "Asymmetric access state changed"}, > - {0x2A07, "Implicit asymmetric access state transition failed"}, > - {0x2A08, "Priority changed"}, > - {0x2A09, "Capacity data has changed"}, > - {0x2A0A, "Error history I_T nexus cleared"}, > - {0x2A0B, "Error history snapshot released"}, > - {0x2A0C, "Error recovery attributes have changed"}, > - {0x2A0D, "Data encryption capabilities changed"}, > - {0x2A10, "Timestamp changed"}, > - {0x2A11, "Data encryption parameters changed by another i_t nexus"}, > - {0x2A12, "Data encryption parameters changed by vendor specific " > - "event"}, > - {0x2A13, "Data encryption key instance counter has changed"}, > - {0x2A14, "SA creation capabilities data has changed"}, > - {0x2A15, "Medium removal prevention preempted"}, > - > - {0x2B00, "Copy cannot execute since host cannot disconnect"}, > - > - {0x2C00, "Command sequence error"}, > - {0x2C01, "Too many windows specified"}, > - {0x2C02, "Invalid combination of windows specified"}, > - {0x2C03, "Current program area is not empty"}, > - {0x2C04, "Current program area is empty"}, > - {0x2C05, "Illegal power condition request"}, > - {0x2C06, "Persistent prevent conflict"}, > - {0x2C07, "Previous busy status"}, > - {0x2C08, "Previous task set full status"}, > - {0x2C09, "Previous reservation conflict status"}, > - {0x2C0A, "Partition or collection contains user objects"}, > - {0x2C0B, "Not reserved"}, > - {0x2C0C, "Orwrite generation does not match"}, > - > - {0x2D00, "Overwrite error on update in place"}, > - > - {0x2E00, "Insufficient time for operation"}, > - > - {0x2F00, "Commands cleared by another initiator"}, > - {0x2F01, "Commands cleared by power loss notification"}, > - {0x2F02, "Commands cleared by device server"}, > - {0x2F03, "Some commands cleared by queuing layer event"}, > - > - {0x3000, "Incompatible medium installed"}, > - {0x3001, "Cannot read medium - unknown format"}, > - {0x3002, "Cannot read medium - incompatible format"}, > - {0x3003, "Cleaning cartridge installed"}, > - {0x3004, "Cannot write medium - unknown format"}, > - {0x3005, "Cannot write medium - incompatible format"}, > - {0x3006, "Cannot format medium - incompatible medium"}, > - {0x3007, "Cleaning failure"}, > - {0x3008, "Cannot write - application code mismatch"}, > - {0x3009, "Current session not fixated for append"}, > - {0x300A, "Cleaning request rejected"}, > - {0x300C, "WORM medium - overwrite attempted"}, > - {0x300D, "WORM medium - integrity check"}, > - {0x3010, "Medium not formatted"}, > - {0x3011, "Incompatible volume type"}, > - {0x3012, "Incompatible volume qualifier"}, > - {0x3013, "Cleaning volume expired"}, > - > - {0x3100, "Medium format corrupted"}, > - {0x3101, "Format command failed"}, > - {0x3102, "Zoned formatting failed due to spare linking"}, > - {0x3103, "Sanitize command failed"}, > - > - {0x3200, "No defect spare location available"}, > - {0x3201, "Defect list update failure"}, > - > - {0x3300, "Tape length error"}, > - > - {0x3400, "Enclosure failure"}, > - > - {0x3500, "Enclosure services failure"}, > - {0x3501, "Unsupported enclosure function"}, > - {0x3502, "Enclosure services unavailable"}, > - {0x3503, "Enclosure services transfer failure"}, > - {0x3504, "Enclosure services transfer refused"}, > - {0x3505, "Enclosure services checksum error"}, > - > - {0x3600, "Ribbon, ink, or toner failure"}, > - > - {0x3700, "Rounded parameter"}, > - > - {0x3800, "Event status notification"}, > - {0x3802, "Esn - power management class event"}, > - {0x3804, "Esn - media class event"}, > - {0x3806, "Esn - device busy class event"}, > - {0x3807, "Thin Provisioning soft threshold reached"}, > - > - {0x3900, "Saving parameters not supported"}, > - > - {0x3A00, "Medium not present"}, > - {0x3A01, "Medium not present - tray closed"}, > - {0x3A02, "Medium not present - tray open"}, > - {0x3A03, "Medium not present - loadable"}, > - {0x3A04, "Medium not present - medium auxiliary memory accessible"}, > - > - {0x3B00, "Sequential positioning error"}, > - {0x3B01, "Tape position error at beginning-of-medium"}, > - {0x3B02, "Tape position error at end-of-medium"}, > - {0x3B03, "Tape or electronic vertical forms unit not ready"}, > - {0x3B04, "Slew failure"}, > - {0x3B05, "Paper jam"}, > - {0x3B06, "Failed to sense top-of-form"}, > - {0x3B07, "Failed to sense bottom-of-form"}, > - {0x3B08, "Reposition error"}, > - {0x3B09, "Read past end of medium"}, > - {0x3B0A, "Read past beginning of medium"}, > - {0x3B0B, "Position past end of medium"}, > - {0x3B0C, "Position past beginning of medium"}, > - {0x3B0D, "Medium destination element full"}, > - {0x3B0E, "Medium source element empty"}, > - {0x3B0F, "End of medium reached"}, > - {0x3B11, "Medium magazine not accessible"}, > - {0x3B12, "Medium magazine removed"}, > - {0x3B13, "Medium magazine inserted"}, > - {0x3B14, "Medium magazine locked"}, > - {0x3B15, "Medium magazine unlocked"}, > - {0x3B16, "Mechanical positioning or changer error"}, > - {0x3B17, "Read past end of user object"}, > - {0x3B18, "Element disabled"}, > - {0x3B19, "Element enabled"}, > - {0x3B1A, "Data transfer device removed"}, > - {0x3B1B, "Data transfer device inserted"}, > - {0x3B1C, "Too many logical objects on partition to support " > - "operation"}, > - > - {0x3D00, "Invalid bits in identify message"}, > - > - {0x3E00, "Logical unit has not self-configured yet"}, > - {0x3E01, "Logical unit failure"}, > - {0x3E02, "Timeout on logical unit"}, > - {0x3E03, "Logical unit failed self-test"}, > - {0x3E04, "Logical unit unable to update self-test log"}, > - > - {0x3F00, "Target operating conditions have changed"}, > - {0x3F01, "Microcode has been changed"}, > - {0x3F02, "Changed operating definition"}, > - {0x3F03, "Inquiry data has changed"}, > - {0x3F04, "Component device attached"}, > - {0x3F05, "Device identifier changed"}, > - {0x3F06, "Redundancy group created or modified"}, > - {0x3F07, "Redundancy group deleted"}, > - {0x3F08, "Spare created or modified"}, > - {0x3F09, "Spare deleted"}, > - {0x3F0A, "Volume set created or modified"}, > - {0x3F0B, "Volume set deleted"}, > - {0x3F0C, "Volume set deassigned"}, > - {0x3F0D, "Volume set reassigned"}, > - {0x3F0E, "Reported luns data has changed"}, > - {0x3F0F, "Echo buffer overwritten"}, > - {0x3F10, "Medium loadable"}, > - {0x3F11, "Medium auxiliary memory accessible"}, > - {0x3F12, "iSCSI IP address added"}, > - {0x3F13, "iSCSI IP address removed"}, > - {0x3F14, "iSCSI IP address changed"}, > - {0x3F15, "Inspect referrals sense descriptors"}, > -/* > - * {0x40NN, "Ram failure"}, > - * {0x40NN, "Diagnostic failure on component nn"}, > - * {0x41NN, "Data path failure"}, > - * {0x42NN, "Power-on or self-test failure"}, > - */ > - {0x4300, "Message error"}, > - > - {0x4400, "Internal target failure"}, > - {0x4401, "Persistent reservation information lost"}, > - {0x4471, "ATA device failed set features"}, > - > - {0x4500, "Select or reselect failure"}, > - > - {0x4600, "Unsuccessful soft reset"}, > - > - {0x4700, "Scsi parity error"}, > - {0x4701, "Data phase CRC error detected"}, > - {0x4702, "Scsi parity error detected during st data phase"}, > - {0x4703, "Information unit iuCRC error detected"}, > - {0x4704, "Asynchronous information protection error detected"}, > - {0x4705, "Protocol service CRC error"}, > - {0x4706, "Phy test function in progress"}, > - {0x477f, "Some commands cleared by iSCSI Protocol event"}, > - > - {0x4800, "Initiator detected error message received"}, > - > - {0x4900, "Invalid message error"}, > - > - {0x4A00, "Command phase error"}, > - > - {0x4B00, "Data phase error"}, > - {0x4B01, "Invalid target port transfer tag received"}, > - {0x4B02, "Too much write data"}, > - {0x4B03, "Ack/nak timeout"}, > - {0x4B04, "Nak received"}, > - {0x4B05, "Data offset error"}, > - {0x4B06, "Initiator response timeout"}, > - {0x4B07, "Connection lost"}, > - {0x4B08, "Data-in buffer overflow - data buffer size"}, > - {0x4B09, "Data-in buffer overflow - data buffer descriptor area"}, > - {0x4B0A, "Data-in buffer error"}, > - {0x4B0B, "Data-out buffer overflow - data buffer size"}, > - {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"}, > - {0x4B0D, "Data-out buffer error"}, > - {0x4B0E, "PCIe fabric error"}, > - {0x4B0F, "PCIe completion timeout"}, > - {0x4B10, "PCIe completer abort"}, > - {0x4B11, "PCIe poisoned tlp received"}, > - {0x4B12, "PCIe eCRC check failed"}, > - {0x4B13, "PCIe unsupported request"}, > - {0x4B14, "PCIe acs violation"}, > - {0x4B15, "PCIe tlp prefix blocked"}, > - > - {0x4C00, "Logical unit failed self-configuration"}, > -/* > - * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"}, > - */ > - {0x4E00, "Overlapped commands attempted"}, > - > - {0x5000, "Write append error"}, > - {0x5001, "Write append position error"}, > - {0x5002, "Position error related to timing"}, > - > - {0x5100, "Erase failure"}, > - {0x5101, "Erase failure - incomplete erase operation detected"}, > - > - {0x5200, "Cartridge fault"}, > - > - {0x5300, "Media load or eject failed"}, > - {0x5301, "Unload tape failure"}, > - {0x5302, "Medium removal prevented"}, > - {0x5303, "Medium removal prevented by data transfer element"}, > - {0x5304, "Medium thread or unthread failure"}, > - {0x5305, "Volume identifier invalid"}, > - {0x5306, "Volume identifier missing"}, > - {0x5307, "Duplicate volume identifier"}, > - {0x5308, "Element status unknown"}, > - > - {0x5400, "Scsi to host system interface failure"}, > - > - {0x5500, "System resource failure"}, > - {0x5501, "System buffer full"}, > - {0x5502, "Insufficient reservation resources"}, > - {0x5503, "Insufficient resources"}, > - {0x5504, "Insufficient registration resources"}, > - {0x5505, "Insufficient access control resources"}, > - {0x5506, "Auxiliary memory out of space"}, > - {0x5507, "Quota error"}, > - {0x5508, "Maximum number of supplemental decryption keys exceeded"}, > - {0x5509, "Medium auxiliary memory not accessible"}, > - {0x550A, "Data currently unavailable"}, > - {0x550B, "Insufficient power for operation"}, > - {0x550C, "Insufficient resources to create rod"}, > - {0x550D, "Insufficient resources to create rod token"}, > - > - {0x5700, "Unable to recover table-of-contents"}, > - > - {0x5800, "Generation does not exist"}, > - > - {0x5900, "Updated block read"}, > - > - {0x5A00, "Operator request or state change input"}, > - {0x5A01, "Operator medium removal request"}, > - {0x5A02, "Operator selected write protect"}, > - {0x5A03, "Operator selected write permit"}, > - > - {0x5B00, "Log exception"}, > - {0x5B01, "Threshold condition met"}, > - {0x5B02, "Log counter at maximum"}, > - {0x5B03, "Log list codes exhausted"}, > - > - {0x5C00, "Rpl status change"}, > - {0x5C01, "Spindles synchronized"}, > - {0x5C02, "Spindles not synchronized"}, > - > - {0x5D00, "Failure prediction threshold exceeded"}, > - {0x5D01, "Media failure prediction threshold exceeded"}, > - {0x5D02, "Logical unit failure prediction threshold exceeded"}, > - {0x5D03, "Spare area exhaustion prediction threshold exceeded"}, > - {0x5D10, "Hardware impending failure general hard drive failure"}, > - {0x5D11, "Hardware impending failure drive error rate too high"}, > - {0x5D12, "Hardware impending failure data error rate too high"}, > - {0x5D13, "Hardware impending failure seek error rate too high"}, > - {0x5D14, "Hardware impending failure too many block reassigns"}, > - {0x5D15, "Hardware impending failure access times too high"}, > - {0x5D16, "Hardware impending failure start unit times too high"}, > - {0x5D17, "Hardware impending failure channel parametrics"}, > - {0x5D18, "Hardware impending failure controller detected"}, > - {0x5D19, "Hardware impending failure throughput performance"}, > - {0x5D1A, "Hardware impending failure seek time performance"}, > - {0x5D1B, "Hardware impending failure spin-up retry count"}, > - {0x5D1C, "Hardware impending failure drive calibration retry count"}, > - {0x5D20, "Controller impending failure general hard drive failure"}, > - {0x5D21, "Controller impending failure drive error rate too high"}, > - {0x5D22, "Controller impending failure data error rate too high"}, > - {0x5D23, "Controller impending failure seek error rate too high"}, > - {0x5D24, "Controller impending failure too many block reassigns"}, > - {0x5D25, "Controller impending failure access times too high"}, > - {0x5D26, "Controller impending failure start unit times too high"}, > - {0x5D27, "Controller impending failure channel parametrics"}, > - {0x5D28, "Controller impending failure controller detected"}, > - {0x5D29, "Controller impending failure throughput performance"}, > - {0x5D2A, "Controller impending failure seek time performance"}, > - {0x5D2B, "Controller impending failure spin-up retry count"}, > - {0x5D2C, "Controller impending failure drive calibration retry count"}, > - {0x5D30, "Data channel impending failure general hard drive failure"}, > - {0x5D31, "Data channel impending failure drive error rate too high"}, > - {0x5D32, "Data channel impending failure data error rate too high"}, > - {0x5D33, "Data channel impending failure seek error rate too high"}, > - {0x5D34, "Data channel impending failure too many block reassigns"}, > - {0x5D35, "Data channel impending failure access times too high"}, > - {0x5D36, "Data channel impending failure start unit times too high"}, > - {0x5D37, "Data channel impending failure channel parametrics"}, > - {0x5D38, "Data channel impending failure controller detected"}, > - {0x5D39, "Data channel impending failure throughput performance"}, > - {0x5D3A, "Data channel impending failure seek time performance"}, > - {0x5D3B, "Data channel impending failure spin-up retry count"}, > - {0x5D3C, "Data channel impending failure drive calibration retry " > - "count"}, > - {0x5D40, "Servo impending failure general hard drive failure"}, > - {0x5D41, "Servo impending failure drive error rate too high"}, > - {0x5D42, "Servo impending failure data error rate too high"}, > - {0x5D43, "Servo impending failure seek error rate too high"}, > - {0x5D44, "Servo impending failure too many block reassigns"}, > - {0x5D45, "Servo impending failure access times too high"}, > - {0x5D46, "Servo impending failure start unit times too high"}, > - {0x5D47, "Servo impending failure channel parametrics"}, > - {0x5D48, "Servo impending failure controller detected"}, > - {0x5D49, "Servo impending failure throughput performance"}, > - {0x5D4A, "Servo impending failure seek time performance"}, > - {0x5D4B, "Servo impending failure spin-up retry count"}, > - {0x5D4C, "Servo impending failure drive calibration retry count"}, > - {0x5D50, "Spindle impending failure general hard drive failure"}, > - {0x5D51, "Spindle impending failure drive error rate too high"}, > - {0x5D52, "Spindle impending failure data error rate too high"}, > - {0x5D53, "Spindle impending failure seek error rate too high"}, > - {0x5D54, "Spindle impending failure too many block reassigns"}, > - {0x5D55, "Spindle impending failure access times too high"}, > - {0x5D56, "Spindle impending failure start unit times too high"}, > - {0x5D57, "Spindle impending failure channel parametrics"}, > - {0x5D58, "Spindle impending failure controller detected"}, > - {0x5D59, "Spindle impending failure throughput performance"}, > - {0x5D5A, "Spindle impending failure seek time performance"}, > - {0x5D5B, "Spindle impending failure spin-up retry count"}, > - {0x5D5C, "Spindle impending failure drive calibration retry count"}, > - {0x5D60, "Firmware impending failure general hard drive failure"}, > - {0x5D61, "Firmware impending failure drive error rate too high"}, > - {0x5D62, "Firmware impending failure data error rate too high"}, > - {0x5D63, "Firmware impending failure seek error rate too high"}, > - {0x5D64, "Firmware impending failure too many block reassigns"}, > - {0x5D65, "Firmware impending failure access times too high"}, > - {0x5D66, "Firmware impending failure start unit times too high"}, > - {0x5D67, "Firmware impending failure channel parametrics"}, > - {0x5D68, "Firmware impending failure controller detected"}, > - {0x5D69, "Firmware impending failure throughput performance"}, > - {0x5D6A, "Firmware impending failure seek time performance"}, > - {0x5D6B, "Firmware impending failure spin-up retry count"}, > - {0x5D6C, "Firmware impending failure drive calibration retry count"}, > - {0x5DFF, "Failure prediction threshold exceeded (false)"}, > - > - {0x5E00, "Low power condition on"}, > - {0x5E01, "Idle condition activated by timer"}, > - {0x5E02, "Standby condition activated by timer"}, > - {0x5E03, "Idle condition activated by command"}, > - {0x5E04, "Standby condition activated by command"}, > - {0x5E05, "Idle_b condition activated by timer"}, > - {0x5E06, "Idle_b condition activated by command"}, > - {0x5E07, "Idle_c condition activated by timer"}, > - {0x5E08, "Idle_c condition activated by command"}, > - {0x5E09, "Standby_y condition activated by timer"}, > - {0x5E0A, "Standby_y condition activated by command"}, > - {0x5E41, "Power state change to active"}, > - {0x5E42, "Power state change to idle"}, > - {0x5E43, "Power state change to standby"}, > - {0x5E45, "Power state change to sleep"}, > - {0x5E47, "Power state change to device control"}, > - > - {0x6000, "Lamp failure"}, > - > - {0x6100, "Video acquisition error"}, > - {0x6101, "Unable to acquire video"}, > - {0x6102, "Out of focus"}, > - > - {0x6200, "Scan head positioning error"}, > - > - {0x6300, "End of user area encountered on this track"}, > - {0x6301, "Packet does not fit in available space"}, > - > - {0x6400, "Illegal mode for this track"}, > - {0x6401, "Invalid packet size"}, > - > - {0x6500, "Voltage fault"}, > - > - {0x6600, "Automatic document feeder cover up"}, > - {0x6601, "Automatic document feeder lift up"}, > - {0x6602, "Document jam in automatic document feeder"}, > - {0x6603, "Document miss feed automatic in document feeder"}, > - > - {0x6700, "Configuration failure"}, > - {0x6701, "Configuration of incapable logical units failed"}, > - {0x6702, "Add logical unit failed"}, > - {0x6703, "Modification of logical unit failed"}, > - {0x6704, "Exchange of logical unit failed"}, > - {0x6705, "Remove of logical unit failed"}, > - {0x6706, "Attachment of logical unit failed"}, > - {0x6707, "Creation of logical unit failed"}, > - {0x6708, "Assign failure occurred"}, > - {0x6709, "Multiply assigned logical unit"}, > - {0x670A, "Set target port groups command failed"}, > - {0x670B, "ATA device feature not enabled"}, > - > - {0x6800, "Logical unit not configured"}, > - {0x6801, "Subsidiary logical unit not configured"}, > - > - {0x6900, "Data loss on logical unit"}, > - {0x6901, "Multiple logical unit failures"}, > - {0x6902, "Parity/data mismatch"}, > - > - {0x6A00, "Informational, refer to log"}, > - > - {0x6B00, "State change has occurred"}, > - {0x6B01, "Redundancy level got better"}, > - {0x6B02, "Redundancy level got worse"}, > - > - {0x6C00, "Rebuild failure occurred"}, > - > - {0x6D00, "Recalculate failure occurred"}, > - > - {0x6E00, "Command to logical unit failed"}, > - > - {0x6F00, "Copy protection key exchange failure - authentication " > - "failure"}, > - {0x6F01, "Copy protection key exchange failure - key not present"}, > - {0x6F02, "Copy protection key exchange failure - key not established"}, > - {0x6F03, "Read of scrambled sector without authentication"}, > - {0x6F04, "Media region code is mismatched to logical unit region"}, > - {0x6F05, "Drive region must be permanent/region reset count error"}, > - {0x6F06, "Insufficient block count for binding nonce recording"}, > - {0x6F07, "Conflict in binding nonce recording"}, > -/* > - * {0x70NN, "Decompression exception short algorithm id of nn"}, > - */ > - {0x7100, "Decompression exception long algorithm id"}, > - > - {0x7200, "Session fixation error"}, > - {0x7201, "Session fixation error writing lead-in"}, > - {0x7202, "Session fixation error writing lead-out"}, > - {0x7203, "Session fixation error - incomplete track in session"}, > - {0x7204, "Empty or partially written reserved track"}, > - {0x7205, "No more track reservations allowed"}, > - {0x7206, "RMZ extension is not allowed"}, > - {0x7207, "No more test zone extensions are allowed"}, > - > - {0x7300, "Cd control error"}, > - {0x7301, "Power calibration area almost full"}, > - {0x7302, "Power calibration area is full"}, > - {0x7303, "Power calibration area error"}, > - {0x7304, "Program memory area update failure"}, > - {0x7305, "Program memory area is full"}, > - {0x7306, "RMA/PMA is almost full"}, > - {0x7310, "Current power calibration area almost full"}, > - {0x7311, "Current power calibration area is full"}, > - {0x7317, "RDZ is full"}, > - > - {0x7400, "Security error"}, > - {0x7401, "Unable to decrypt data"}, > - {0x7402, "Unencrypted data encountered while decrypting"}, > - {0x7403, "Incorrect data encryption key"}, > - {0x7404, "Cryptographic integrity validation failed"}, > - {0x7405, "Error decrypting data"}, > - {0x7406, "Unknown signature verification key"}, > - {0x7407, "Encryption parameters not useable"}, > - {0x7408, "Digital signature validation failure"}, > - {0x7409, "Encryption mode mismatch on read"}, > - {0x740A, "Encrypted block not raw read enabled"}, > - {0x740B, "Incorrect Encryption parameters"}, > - {0x740C, "Unable to decrypt parameter list"}, > - {0x740D, "Encryption algorithm disabled"}, > - {0x7410, "SA creation parameter value invalid"}, > - {0x7411, "SA creation parameter value rejected"}, > - {0x7412, "Invalid SA usage"}, > - {0x7421, "Data Encryption configuration prevented"}, > - {0x7430, "SA creation parameter not supported"}, > - {0x7440, "Authentication failed"}, > - {0x7461, "External data encryption key manager access error"}, > - {0x7462, "External data encryption key manager error"}, > - {0x7463, "External data encryption key not found"}, > - {0x7464, "External data encryption request not authorized"}, > - {0x746E, "External data encryption control timeout"}, > - {0x746F, "External data encryption control error"}, > - {0x7471, "Logical unit access not authorized"}, > - {0x7479, "Security conflict in translated device"}, > - > - {0, NULL} > -}; > - > -struct error_info2 { > - unsigned char code1, code2_min, code2_max; > - const char * fmt; > -}; > - > -static const struct error_info2 additional2[] = > -{ > - {0x40, 0x00, 0x7f, "Ram failure (%x)"}, > - {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"}, > - {0x41, 0x00, 0xff, "Data path failure (%x)"}, > - {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"}, > - {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"}, > - {0x70, 0x00, 0xff, "Decompression exception short algorithm id of %x"}, > - {0, 0, 0, NULL} > -}; > -#endif > - > -/* > - * Get additional sense code string or NULL if not available. > - * This string may contain a "%x" and should be printed with ascq as arg. > - */ > -const char * > -scsi_extd_sense_format(unsigned char asc, unsigned char ascq) { > -#ifdef CONFIG_SCSI_CONSTANTS > - int i; > - unsigned short code = ((asc << 8) | ascq); > - > - for (i = 0; additional[i].text; i++) > - if (additional[i].code12 == code) > - return additional[i].text; > - for (i = 0; additional2[i].fmt; i++) { > - if (additional2[i].code1 == asc && > - ascq >= additional2[i].code2_min && > - ascq <= additional2[i].code2_max) > - return additional2[i].fmt; > - } > -#endif > - return NULL; > -} > -EXPORT_SYMBOL(scsi_extd_sense_format); > - > -void > -scsi_show_extd_sense(struct scsi_device *sdev, const char *name, > - unsigned char asc, unsigned char ascq) > -{ > - const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq); > - > - if (extd_sense_fmt) { > - if (strstr(extd_sense_fmt, "%x")) { > - char sense_buf[50]; > - sprintf(sense_buf, extd_sense_fmt, ascq); > - sdev_printk(KERN_INFO, sdev, > - "[%s] Add. Sense: %s", name, sense_buf); > - } else > - sdev_printk(KERN_INFO, sdev, > - "[%s] Add. Sense: %s\n", > - name, extd_sense_fmt); > - } else > - sdev_printk(KERN_INFO, sdev, > - "[%s] %sASC=0x%x %sASCQ=0x%x\n", > - name, asc >= 0x80 ? "<<vendor>> " : "", asc, > - asc < 0 && ascq >= 0x80 ? "<<vendor>> ": "", > - ascq); > -} > -EXPORT_SYMBOL(scsi_show_extd_sense); > - > -/* > - * Print normalized SCSI sense header with a prefix. > - */ > -void > -scsi_print_sense_hdr(struct scsi_device *sdev, const char *name, > - struct scsi_sense_hdr *sshdr) > -{ > - trace_scsi_print_sense(sdev, name, sshdr, NULL, 0, 0); > - scsi_show_extd_sense(sdev, name, sshdr->asc, sshdr->ascq); > -} > -EXPORT_SYMBOL(scsi_print_sense_hdr); > - > -/* Normalize and print sense buffer with name prefix */ > -void __scsi_print_sense(struct scsi_device *sdev, const char *name, > - const unsigned char *sense_buffer, int sense_len) > -{ > - struct scsi_sense_hdr sshdr; > - int raw; > - > - raw = !scsi_normalize_sense(sense_buffer, sense_len, &sshdr); > - > - trace_scsi_print_sense(sdev, name, &sshdr, sense_buffer, sense_len, > - raw); > - scsi_show_extd_sense(sdev, name, sshdr.asc, sshdr.ascq); > -} > -EXPORT_SYMBOL(__scsi_print_sense); > - > -/* Normalize and print sense buffer in SCSI command */ > -void scsi_print_sense(struct scsi_cmnd *cmd) > -{ > - const char *devname = cmd->request->rq_disk ? > - cmd->request->rq_disk->disk_name : "scsi"; > - > - __scsi_print_sense(cmd->device, devname, cmd->sense_buffer, > - SCSI_SENSE_BUFFERSIZE); > -} > -EXPORT_SYMBOL(scsi_print_sense); > diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c > index 2ecb1dc..60678d8 100644 > --- a/drivers/scsi/scsi_trace.c > +++ b/drivers/scsi/scsi_trace.c > @@ -22,6 +22,7 @@ > > #include <scsi/scsi_dbg.h> > #include <scsi/scsi_eh.h> > +#include <scsi/scsi_dbg.h> > > #define SERVICE_ACTION16(cdb) (cdb[1] & 0x1f) > #define SERVICE_ACTION32(cdb) ((cdb[8] << 8) | cdb[9]) > @@ -291,6 +292,841 @@ scsi_trace_parse_cdb(struct trace_seq *p, unsigned char *cdb, int len) > } > > #ifdef CONFIG_SCSI_CONSTANTS > + > +struct error_info { > + unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */ > + const char *text; > +}; > + > +/* > + * The canonical list of T10 Additional Sense Codes is available at: > + * http://www.t10.org/lists/asc-num.txt [most recent: 20130605] > + */ > + > +static const struct error_info additional[] = > +{ > + {0x0000, "No additional sense information"}, > + {0x0001, "Filemark detected"}, > + {0x0002, "End-of-partition/medium detected"}, > + {0x0003, "Setmark detected"}, > + {0x0004, "Beginning-of-partition/medium detected"}, > + {0x0005, "End-of-data detected"}, > + {0x0006, "I/O process terminated"}, > + {0x0007, "Programmable early warning detected"}, > + {0x0011, "Audio play operation in progress"}, > + {0x0012, "Audio play operation paused"}, > + {0x0013, "Audio play operation successfully completed"}, > + {0x0014, "Audio play operation stopped due to error"}, > + {0x0015, "No current audio status to return"}, > + {0x0016, "Operation in progress"}, > + {0x0017, "Cleaning requested"}, > + {0x0018, "Erase operation in progress"}, > + {0x0019, "Locate operation in progress"}, > + {0x001A, "Rewind operation in progress"}, > + {0x001B, "Set capacity operation in progress"}, > + {0x001C, "Verify operation in progress"}, > + {0x001D, "ATA pass through information available"}, > + {0x001E, "Conflicting SA creation request"}, > + {0x001F, "Logical unit transitioning to another power condition"}, > + {0x0020, "Extended copy information available"}, > + > + {0x0100, "No index/sector signal"}, > + > + {0x0200, "No seek complete"}, > + > + {0x0300, "Peripheral device write fault"}, > + {0x0301, "No write current"}, > + {0x0302, "Excessive write errors"}, > + > + {0x0400, "Logical unit not ready, cause not reportable"}, > + {0x0401, "Logical unit is in process of becoming ready"}, > + {0x0402, "Logical unit not ready, initializing command required"}, > + {0x0403, "Logical unit not ready, manual intervention required"}, > + {0x0404, "Logical unit not ready, format in progress"}, > + {0x0405, "Logical unit not ready, rebuild in progress"}, > + {0x0406, "Logical unit not ready, recalculation in progress"}, > + {0x0407, "Logical unit not ready, operation in progress"}, > + {0x0408, "Logical unit not ready, long write in progress"}, > + {0x0409, "Logical unit not ready, self-test in progress"}, > + {0x040A, "Logical unit not accessible, asymmetric access state " > + "transition"}, > + {0x040B, "Logical unit not accessible, target port in standby state"}, > + {0x040C, "Logical unit not accessible, target port in unavailable " > + "state"}, > + {0x040D, "Logical unit not ready, structure check required"}, > + {0x0410, "Logical unit not ready, auxiliary memory not accessible"}, > + {0x0411, "Logical unit not ready, notify (enable spinup) required"}, > + {0x0412, "Logical unit not ready, offline"}, > + {0x0413, "Logical unit not ready, SA creation in progress"}, > + {0x0414, "Logical unit not ready, space allocation in progress"}, > + {0x0415, "Logical unit not ready, robotics disabled"}, > + {0x0416, "Logical unit not ready, configuration required"}, > + {0x0417, "Logical unit not ready, calibration required"}, > + {0x0418, "Logical unit not ready, a door is open"}, > + {0x0419, "Logical unit not ready, operating in sequential mode"}, > + {0x041A, "Logical unit not ready, start stop unit command in " > + "progress"}, > + {0x041B, "Logical unit not ready, sanitize in progress"}, > + {0x041C, "Logical unit not ready, additional power use not yet " > + "granted"}, > + {0x041D, "Logical unit not ready, configuration in progress"}, > + > + {0x0500, "Logical unit does not respond to selection"}, > + > + {0x0600, "No reference position found"}, > + > + {0x0700, "Multiple peripheral devices selected"}, > + > + {0x0800, "Logical unit communication failure"}, > + {0x0801, "Logical unit communication time-out"}, > + {0x0802, "Logical unit communication parity error"}, > + {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"}, > + {0x0804, "Unreachable copy target"}, > + > + {0x0900, "Track following error"}, > + {0x0901, "Tracking servo failure"}, > + {0x0902, "Focus servo failure"}, > + {0x0903, "Spindle servo failure"}, > + {0x0904, "Head select fault"}, > + > + {0x0A00, "Error log overflow"}, > + > + {0x0B00, "Warning"}, > + {0x0B01, "Warning - specified temperature exceeded"}, > + {0x0B02, "Warning - enclosure degraded"}, > + {0x0B03, "Warning - background self-test failed"}, > + {0x0B04, "Warning - background pre-scan detected medium error"}, > + {0x0B05, "Warning - background medium scan detected medium error"}, > + {0x0B06, "Warning - non-volatile cache now volatile"}, > + {0x0B07, "Warning - degraded power to non-volatile cache"}, > + {0x0B08, "Warning - power loss expected"}, > + {0x0B09, "Warning - device statistics notification active"}, > + > + {0x0C00, "Write error"}, > + {0x0C01, "Write error - recovered with auto reallocation"}, > + {0x0C02, "Write error - auto reallocation failed"}, > + {0x0C03, "Write error - recommend reassignment"}, > + {0x0C04, "Compression check miscompare error"}, > + {0x0C05, "Data expansion occurred during compression"}, > + {0x0C06, "Block not compressible"}, > + {0x0C07, "Write error - recovery needed"}, > + {0x0C08, "Write error - recovery failed"}, > + {0x0C09, "Write error - loss of streaming"}, > + {0x0C0A, "Write error - padding blocks added"}, > + {0x0C0B, "Auxiliary memory write error"}, > + {0x0C0C, "Write error - unexpected unsolicited data"}, > + {0x0C0D, "Write error - not enough unsolicited data"}, > + {0x0C0E, "Multiple write errors"}, > + {0x0C0F, "Defects in error window"}, > + > + {0x0D00, "Error detected by third party temporary initiator"}, > + {0x0D01, "Third party device failure"}, > + {0x0D02, "Copy target device not reachable"}, > + {0x0D03, "Incorrect copy target device type"}, > + {0x0D04, "Copy target device data underrun"}, > + {0x0D05, "Copy target device data overrun"}, > + > + {0x0E00, "Invalid information unit"}, > + {0x0E01, "Information unit too short"}, > + {0x0E02, "Information unit too long"}, > + {0x0E03, "Invalid field in command information unit"}, > + > + {0x1000, "Id CRC or ECC error"}, > + {0x1001, "Logical block guard check failed"}, > + {0x1002, "Logical block application tag check failed"}, > + {0x1003, "Logical block reference tag check failed"}, > + {0x1004, "Logical block protection error on recover buffered data"}, > + {0x1005, "Logical block protection method error"}, > + > + {0x1100, "Unrecovered read error"}, > + {0x1101, "Read retries exhausted"}, > + {0x1102, "Error too long to correct"}, > + {0x1103, "Multiple read errors"}, > + {0x1104, "Unrecovered read error - auto reallocate failed"}, > + {0x1105, "L-EC uncorrectable error"}, > + {0x1106, "CIRC unrecovered error"}, > + {0x1107, "Data re-synchronization error"}, > + {0x1108, "Incomplete block read"}, > + {0x1109, "No gap found"}, > + {0x110A, "Miscorrected error"}, > + {0x110B, "Unrecovered read error - recommend reassignment"}, > + {0x110C, "Unrecovered read error - recommend rewrite the data"}, > + {0x110D, "De-compression CRC error"}, > + {0x110E, "Cannot decompress using declared algorithm"}, > + {0x110F, "Error reading UPC/EAN number"}, > + {0x1110, "Error reading ISRC number"}, > + {0x1111, "Read error - loss of streaming"}, > + {0x1112, "Auxiliary memory read error"}, > + {0x1113, "Read error - failed retransmission request"}, > + {0x1114, "Read error - lba marked bad by application client"}, > + {0x1115, "Write after sanitize required"}, > + > + {0x1200, "Address mark not found for id field"}, > + > + {0x1300, "Address mark not found for data field"}, > + > + {0x1400, "Recorded entity not found"}, > + {0x1401, "Record not found"}, > + {0x1402, "Filemark or setmark not found"}, > + {0x1403, "End-of-data not found"}, > + {0x1404, "Block sequence error"}, > + {0x1405, "Record not found - recommend reassignment"}, > + {0x1406, "Record not found - data auto-reallocated"}, > + {0x1407, "Locate operation failure"}, > + > + {0x1500, "Random positioning error"}, > + {0x1501, "Mechanical positioning error"}, > + {0x1502, "Positioning error detected by read of medium"}, > + > + {0x1600, "Data synchronization mark error"}, > + {0x1601, "Data sync error - data rewritten"}, > + {0x1602, "Data sync error - recommend rewrite"}, > + {0x1603, "Data sync error - data auto-reallocated"}, > + {0x1604, "Data sync error - recommend reassignment"}, > + > + {0x1700, "Recovered data with no error correction applied"}, > + {0x1701, "Recovered data with retries"}, > + {0x1702, "Recovered data with positive head offset"}, > + {0x1703, "Recovered data with negative head offset"}, > + {0x1704, "Recovered data with retries and/or circ applied"}, > + {0x1705, "Recovered data using previous sector id"}, > + {0x1706, "Recovered data without ECC - data auto-reallocated"}, > + {0x1707, "Recovered data without ECC - recommend reassignment"}, > + {0x1708, "Recovered data without ECC - recommend rewrite"}, > + {0x1709, "Recovered data without ECC - data rewritten"}, > + > + {0x1800, "Recovered data with error correction applied"}, > + {0x1801, "Recovered data with error corr. & retries applied"}, > + {0x1802, "Recovered data - data auto-reallocated"}, > + {0x1803, "Recovered data with CIRC"}, > + {0x1804, "Recovered data with L-EC"}, > + {0x1805, "Recovered data - recommend reassignment"}, > + {0x1806, "Recovered data - recommend rewrite"}, > + {0x1807, "Recovered data with ECC - data rewritten"}, > + {0x1808, "Recovered data with linking"}, > + > + {0x1900, "Defect list error"}, > + {0x1901, "Defect list not available"}, > + {0x1902, "Defect list error in primary list"}, > + {0x1903, "Defect list error in grown list"}, > + > + {0x1A00, "Parameter list length error"}, > + > + {0x1B00, "Synchronous data transfer error"}, > + > + {0x1C00, "Defect list not found"}, > + {0x1C01, "Primary defect list not found"}, > + {0x1C02, "Grown defect list not found"}, > + > + {0x1D00, "Miscompare during verify operation"}, > + {0x1D01, "Miscompare verify of unmapped LBA"}, > + > + {0x1E00, "Recovered id with ECC correction"}, > + > + {0x1F00, "Partial defect list transfer"}, > + > + {0x2000, "Invalid command operation code"}, > + {0x2001, "Access denied - initiator pending-enrolled"}, > + {0x2002, "Access denied - no access rights"}, > + {0x2003, "Access denied - invalid mgmt id key"}, > + {0x2004, "Illegal command while in write capable state"}, > + {0x2005, "Obsolete"}, > + {0x2006, "Illegal command while in explicit address mode"}, > + {0x2007, "Illegal command while in implicit address mode"}, > + {0x2008, "Access denied - enrollment conflict"}, > + {0x2009, "Access denied - invalid LU identifier"}, > + {0x200A, "Access denied - invalid proxy token"}, > + {0x200B, "Access denied - ACL LUN conflict"}, > + {0x200C, "Illegal command when not in append-only mode"}, > + > + {0x2100, "Logical block address out of range"}, > + {0x2101, "Invalid element address"}, > + {0x2102, "Invalid address for write"}, > + {0x2103, "Invalid write crossing layer jump"}, > + > + {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, > + > + {0x2300, "Invalid token operation, cause not reportable"}, > + {0x2301, "Invalid token operation, unsupported token type"}, > + {0x2302, "Invalid token operation, remote token usage not supported"}, > + {0x2303, "Invalid token operation, remote rod token creation not " > + "supported"}, > + {0x2304, "Invalid token operation, token unknown"}, > + {0x2305, "Invalid token operation, token corrupt"}, > + {0x2306, "Invalid token operation, token revoked"}, > + {0x2307, "Invalid token operation, token expired"}, > + {0x2308, "Invalid token operation, token cancelled"}, > + {0x2309, "Invalid token operation, token deleted"}, > + {0x230A, "Invalid token operation, invalid token length"}, > + > + {0x2400, "Invalid field in cdb"}, > + {0x2401, "CDB decryption error"}, > + {0x2402, "Obsolete"}, > + {0x2403, "Obsolete"}, > + {0x2404, "Security audit value frozen"}, > + {0x2405, "Security working key frozen"}, > + {0x2406, "Nonce not unique"}, > + {0x2407, "Nonce timestamp out of range"}, > + {0x2408, "Invalid XCDB"}, > + > + {0x2500, "Logical unit not supported"}, > + > + {0x2600, "Invalid field in parameter list"}, > + {0x2601, "Parameter not supported"}, > + {0x2602, "Parameter value invalid"}, > + {0x2603, "Threshold parameters not supported"}, > + {0x2604, "Invalid release of persistent reservation"}, > + {0x2605, "Data decryption error"}, > + {0x2606, "Too many target descriptors"}, > + {0x2607, "Unsupported target descriptor type code"}, > + {0x2608, "Too many segment descriptors"}, > + {0x2609, "Unsupported segment descriptor type code"}, > + {0x260A, "Unexpected inexact segment"}, > + {0x260B, "Inline data length exceeded"}, > + {0x260C, "Invalid operation for copy source or destination"}, > + {0x260D, "Copy segment granularity violation"}, > + {0x260E, "Invalid parameter while port is enabled"}, > + {0x260F, "Invalid data-out buffer integrity check value"}, > + {0x2610, "Data decryption key fail limit reached"}, > + {0x2611, "Incomplete key-associated data set"}, > + {0x2612, "Vendor specific key reference not found"}, > + > + {0x2700, "Write protected"}, > + {0x2701, "Hardware write protected"}, > + {0x2702, "Logical unit software write protected"}, > + {0x2703, "Associated write protect"}, > + {0x2704, "Persistent write protect"}, > + {0x2705, "Permanent write protect"}, > + {0x2706, "Conditional write protect"}, > + {0x2707, "Space allocation failed write protect"}, > + > + {0x2800, "Not ready to ready change, medium may have changed"}, > + {0x2801, "Import or export element accessed"}, > + {0x2802, "Format-layer may have changed"}, > + {0x2803, "Import/export element accessed, medium changed"}, > + > + {0x2900, "Power on, reset, or bus device reset occurred"}, > + {0x2901, "Power on occurred"}, > + {0x2902, "Scsi bus reset occurred"}, > + {0x2903, "Bus device reset function occurred"}, > + {0x2904, "Device internal reset"}, > + {0x2905, "Transceiver mode changed to single-ended"}, > + {0x2906, "Transceiver mode changed to lvd"}, > + {0x2907, "I_T nexus loss occurred"}, > + > + {0x2A00, "Parameters changed"}, > + {0x2A01, "Mode parameters changed"}, > + {0x2A02, "Log parameters changed"}, > + {0x2A03, "Reservations preempted"}, > + {0x2A04, "Reservations released"}, > + {0x2A05, "Registrations preempted"}, > + {0x2A06, "Asymmetric access state changed"}, > + {0x2A07, "Implicit asymmetric access state transition failed"}, > + {0x2A08, "Priority changed"}, > + {0x2A09, "Capacity data has changed"}, > + {0x2A0A, "Error history I_T nexus cleared"}, > + {0x2A0B, "Error history snapshot released"}, > + {0x2A0C, "Error recovery attributes have changed"}, > + {0x2A0D, "Data encryption capabilities changed"}, > + {0x2A10, "Timestamp changed"}, > + {0x2A11, "Data encryption parameters changed by another i_t nexus"}, > + {0x2A12, "Data encryption parameters changed by vendor specific " > + "event"}, > + {0x2A13, "Data encryption key instance counter has changed"}, > + {0x2A14, "SA creation capabilities data has changed"}, > + {0x2A15, "Medium removal prevention preempted"}, > + > + {0x2B00, "Copy cannot execute since host cannot disconnect"}, > + > + {0x2C00, "Command sequence error"}, > + {0x2C01, "Too many windows specified"}, > + {0x2C02, "Invalid combination of windows specified"}, > + {0x2C03, "Current program area is not empty"}, > + {0x2C04, "Current program area is empty"}, > + {0x2C05, "Illegal power condition request"}, > + {0x2C06, "Persistent prevent conflict"}, > + {0x2C07, "Previous busy status"}, > + {0x2C08, "Previous task set full status"}, > + {0x2C09, "Previous reservation conflict status"}, > + {0x2C0A, "Partition or collection contains user objects"}, > + {0x2C0B, "Not reserved"}, > + {0x2C0C, "Orwrite generation does not match"}, > + > + {0x2D00, "Overwrite error on update in place"}, > + > + {0x2E00, "Insufficient time for operation"}, > + > + {0x2F00, "Commands cleared by another initiator"}, > + {0x2F01, "Commands cleared by power loss notification"}, > + {0x2F02, "Commands cleared by device server"}, > + {0x2F03, "Some commands cleared by queuing layer event"}, > + > + {0x3000, "Incompatible medium installed"}, > + {0x3001, "Cannot read medium - unknown format"}, > + {0x3002, "Cannot read medium - incompatible format"}, > + {0x3003, "Cleaning cartridge installed"}, > + {0x3004, "Cannot write medium - unknown format"}, > + {0x3005, "Cannot write medium - incompatible format"}, > + {0x3006, "Cannot format medium - incompatible medium"}, > + {0x3007, "Cleaning failure"}, > + {0x3008, "Cannot write - application code mismatch"}, > + {0x3009, "Current session not fixated for append"}, > + {0x300A, "Cleaning request rejected"}, > + {0x300C, "WORM medium - overwrite attempted"}, > + {0x300D, "WORM medium - integrity check"}, > + {0x3010, "Medium not formatted"}, > + {0x3011, "Incompatible volume type"}, > + {0x3012, "Incompatible volume qualifier"}, > + {0x3013, "Cleaning volume expired"}, > + > + {0x3100, "Medium format corrupted"}, > + {0x3101, "Format command failed"}, > + {0x3102, "Zoned formatting failed due to spare linking"}, > + {0x3103, "Sanitize command failed"}, > + > + {0x3200, "No defect spare location available"}, > + {0x3201, "Defect list update failure"}, > + > + {0x3300, "Tape length error"}, > + > + {0x3400, "Enclosure failure"}, > + > + {0x3500, "Enclosure services failure"}, > + {0x3501, "Unsupported enclosure function"}, > + {0x3502, "Enclosure services unavailable"}, > + {0x3503, "Enclosure services transfer failure"}, > + {0x3504, "Enclosure services transfer refused"}, > + {0x3505, "Enclosure services checksum error"}, > + > + {0x3600, "Ribbon, ink, or toner failure"}, > + > + {0x3700, "Rounded parameter"}, > + > + {0x3800, "Event status notification"}, > + {0x3802, "Esn - power management class event"}, > + {0x3804, "Esn - media class event"}, > + {0x3806, "Esn - device busy class event"}, > + {0x3807, "Thin Provisioning soft threshold reached"}, > + > + {0x3900, "Saving parameters not supported"}, > + > + {0x3A00, "Medium not present"}, > + {0x3A01, "Medium not present - tray closed"}, > + {0x3A02, "Medium not present - tray open"}, > + {0x3A03, "Medium not present - loadable"}, > + {0x3A04, "Medium not present - medium auxiliary memory accessible"}, > + > + {0x3B00, "Sequential positioning error"}, > + {0x3B01, "Tape position error at beginning-of-medium"}, > + {0x3B02, "Tape position error at end-of-medium"}, > + {0x3B03, "Tape or electronic vertical forms unit not ready"}, > + {0x3B04, "Slew failure"}, > + {0x3B05, "Paper jam"}, > + {0x3B06, "Failed to sense top-of-form"}, > + {0x3B07, "Failed to sense bottom-of-form"}, > + {0x3B08, "Reposition error"}, > + {0x3B09, "Read past end of medium"}, > + {0x3B0A, "Read past beginning of medium"}, > + {0x3B0B, "Position past end of medium"}, > + {0x3B0C, "Position past beginning of medium"}, > + {0x3B0D, "Medium destination element full"}, > + {0x3B0E, "Medium source element empty"}, > + {0x3B0F, "End of medium reached"}, > + {0x3B11, "Medium magazine not accessible"}, > + {0x3B12, "Medium magazine removed"}, > + {0x3B13, "Medium magazine inserted"}, > + {0x3B14, "Medium magazine locked"}, > + {0x3B15, "Medium magazine unlocked"}, > + {0x3B16, "Mechanical positioning or changer error"}, > + {0x3B17, "Read past end of user object"}, > + {0x3B18, "Element disabled"}, > + {0x3B19, "Element enabled"}, > + {0x3B1A, "Data transfer device removed"}, > + {0x3B1B, "Data transfer device inserted"}, > + {0x3B1C, "Too many logical objects on partition to support " > + "operation"}, > + > + {0x3D00, "Invalid bits in identify message"}, > + > + {0x3E00, "Logical unit has not self-configured yet"}, > + {0x3E01, "Logical unit failure"}, > + {0x3E02, "Timeout on logical unit"}, > + {0x3E03, "Logical unit failed self-test"}, > + {0x3E04, "Logical unit unable to update self-test log"}, > + > + {0x3F00, "Target operating conditions have changed"}, > + {0x3F01, "Microcode has been changed"}, > + {0x3F02, "Changed operating definition"}, > + {0x3F03, "Inquiry data has changed"}, > + {0x3F04, "Component device attached"}, > + {0x3F05, "Device identifier changed"}, > + {0x3F06, "Redundancy group created or modified"}, > + {0x3F07, "Redundancy group deleted"}, > + {0x3F08, "Spare created or modified"}, > + {0x3F09, "Spare deleted"}, > + {0x3F0A, "Volume set created or modified"}, > + {0x3F0B, "Volume set deleted"}, > + {0x3F0C, "Volume set deassigned"}, > + {0x3F0D, "Volume set reassigned"}, > + {0x3F0E, "Reported luns data has changed"}, > + {0x3F0F, "Echo buffer overwritten"}, > + {0x3F10, "Medium loadable"}, > + {0x3F11, "Medium auxiliary memory accessible"}, > + {0x3F12, "iSCSI IP address added"}, > + {0x3F13, "iSCSI IP address removed"}, > + {0x3F14, "iSCSI IP address changed"}, > + {0x3F15, "Inspect referrals sense descriptors"}, > +/* > + * {0x40NN, "Ram failure"}, > + * {0x40NN, "Diagnostic failure on component nn"}, > + * {0x41NN, "Data path failure"}, > + * {0x42NN, "Power-on or self-test failure"}, > + */ > + {0x4300, "Message error"}, > + > + {0x4400, "Internal target failure"}, > + {0x4401, "Persistent reservation information lost"}, > + {0x4471, "ATA device failed set features"}, > + > + {0x4500, "Select or reselect failure"}, > + > + {0x4600, "Unsuccessful soft reset"}, > + > + {0x4700, "Scsi parity error"}, > + {0x4701, "Data phase CRC error detected"}, > + {0x4702, "Scsi parity error detected during st data phase"}, > + {0x4703, "Information unit iuCRC error detected"}, > + {0x4704, "Asynchronous information protection error detected"}, > + {0x4705, "Protocol service CRC error"}, > + {0x4706, "Phy test function in progress"}, > + {0x477f, "Some commands cleared by iSCSI Protocol event"}, > + > + {0x4800, "Initiator detected error message received"}, > + > + {0x4900, "Invalid message error"}, > + > + {0x4A00, "Command phase error"}, > + > + {0x4B00, "Data phase error"}, > + {0x4B01, "Invalid target port transfer tag received"}, > + {0x4B02, "Too much write data"}, > + {0x4B03, "Ack/nak timeout"}, > + {0x4B04, "Nak received"}, > + {0x4B05, "Data offset error"}, > + {0x4B06, "Initiator response timeout"}, > + {0x4B07, "Connection lost"}, > + {0x4B08, "Data-in buffer overflow - data buffer size"}, > + {0x4B09, "Data-in buffer overflow - data buffer descriptor area"}, > + {0x4B0A, "Data-in buffer error"}, > + {0x4B0B, "Data-out buffer overflow - data buffer size"}, > + {0x4B0C, "Data-out buffer overflow - data buffer descriptor area"}, > + {0x4B0D, "Data-out buffer error"}, > + {0x4B0E, "PCIe fabric error"}, > + {0x4B0F, "PCIe completion timeout"}, > + {0x4B10, "PCIe completer abort"}, > + {0x4B11, "PCIe poisoned tlp received"}, > + {0x4B12, "PCIe eCRC check failed"}, > + {0x4B13, "PCIe unsupported request"}, > + {0x4B14, "PCIe acs violation"}, > + {0x4B15, "PCIe tlp prefix blocked"}, > + > + {0x4C00, "Logical unit failed self-configuration"}, > +/* > + * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"}, > + */ > + {0x4E00, "Overlapped commands attempted"}, > + > + {0x5000, "Write append error"}, > + {0x5001, "Write append position error"}, > + {0x5002, "Position error related to timing"}, > + > + {0x5100, "Erase failure"}, > + {0x5101, "Erase failure - incomplete erase operation detected"}, > + > + {0x5200, "Cartridge fault"}, > + > + {0x5300, "Media load or eject failed"}, > + {0x5301, "Unload tape failure"}, > + {0x5302, "Medium removal prevented"}, > + {0x5303, "Medium removal prevented by data transfer element"}, > + {0x5304, "Medium thread or unthread failure"}, > + {0x5305, "Volume identifier invalid"}, > + {0x5306, "Volume identifier missing"}, > + {0x5307, "Duplicate volume identifier"}, > + {0x5308, "Element status unknown"}, > + > + {0x5400, "Scsi to host system interface failure"}, > + > + {0x5500, "System resource failure"}, > + {0x5501, "System buffer full"}, > + {0x5502, "Insufficient reservation resources"}, > + {0x5503, "Insufficient resources"}, > + {0x5504, "Insufficient registration resources"}, > + {0x5505, "Insufficient access control resources"}, > + {0x5506, "Auxiliary memory out of space"}, > + {0x5507, "Quota error"}, > + {0x5508, "Maximum number of supplemental decryption keys exceeded"}, > + {0x5509, "Medium auxiliary memory not accessible"}, > + {0x550A, "Data currently unavailable"}, > + {0x550B, "Insufficient power for operation"}, > + {0x550C, "Insufficient resources to create rod"}, > + {0x550D, "Insufficient resources to create rod token"}, > + > + {0x5700, "Unable to recover table-of-contents"}, > + > + {0x5800, "Generation does not exist"}, > + > + {0x5900, "Updated block read"}, > + > + {0x5A00, "Operator request or state change input"}, > + {0x5A01, "Operator medium removal request"}, > + {0x5A02, "Operator selected write protect"}, > + {0x5A03, "Operator selected write permit"}, > + > + {0x5B00, "Log exception"}, > + {0x5B01, "Threshold condition met"}, > + {0x5B02, "Log counter at maximum"}, > + {0x5B03, "Log list codes exhausted"}, > + > + {0x5C00, "Rpl status change"}, > + {0x5C01, "Spindles synchronized"}, > + {0x5C02, "Spindles not synchronized"}, > + > + {0x5D00, "Failure prediction threshold exceeded"}, > + {0x5D01, "Media failure prediction threshold exceeded"}, > + {0x5D02, "Logical unit failure prediction threshold exceeded"}, > + {0x5D03, "Spare area exhaustion prediction threshold exceeded"}, > + {0x5D10, "Hardware impending failure general hard drive failure"}, > + {0x5D11, "Hardware impending failure drive error rate too high"}, > + {0x5D12, "Hardware impending failure data error rate too high"}, > + {0x5D13, "Hardware impending failure seek error rate too high"}, > + {0x5D14, "Hardware impending failure too many block reassigns"}, > + {0x5D15, "Hardware impending failure access times too high"}, > + {0x5D16, "Hardware impending failure start unit times too high"}, > + {0x5D17, "Hardware impending failure channel parametrics"}, > + {0x5D18, "Hardware impending failure controller detected"}, > + {0x5D19, "Hardware impending failure throughput performance"}, > + {0x5D1A, "Hardware impending failure seek time performance"}, > + {0x5D1B, "Hardware impending failure spin-up retry count"}, > + {0x5D1C, "Hardware impending failure drive calibration retry count"}, > + {0x5D20, "Controller impending failure general hard drive failure"}, > + {0x5D21, "Controller impending failure drive error rate too high"}, > + {0x5D22, "Controller impending failure data error rate too high"}, > + {0x5D23, "Controller impending failure seek error rate too high"}, > + {0x5D24, "Controller impending failure too many block reassigns"}, > + {0x5D25, "Controller impending failure access times too high"}, > + {0x5D26, "Controller impending failure start unit times too high"}, > + {0x5D27, "Controller impending failure channel parametrics"}, > + {0x5D28, "Controller impending failure controller detected"}, > + {0x5D29, "Controller impending failure throughput performance"}, > + {0x5D2A, "Controller impending failure seek time performance"}, > + {0x5D2B, "Controller impending failure spin-up retry count"}, > + {0x5D2C, "Controller impending failure drive calibration retry count"}, > + {0x5D30, "Data channel impending failure general hard drive failure"}, > + {0x5D31, "Data channel impending failure drive error rate too high"}, > + {0x5D32, "Data channel impending failure data error rate too high"}, > + {0x5D33, "Data channel impending failure seek error rate too high"}, > + {0x5D34, "Data channel impending failure too many block reassigns"}, > + {0x5D35, "Data channel impending failure access times too high"}, > + {0x5D36, "Data channel impending failure start unit times too high"}, > + {0x5D37, "Data channel impending failure channel parametrics"}, > + {0x5D38, "Data channel impending failure controller detected"}, > + {0x5D39, "Data channel impending failure throughput performance"}, > + {0x5D3A, "Data channel impending failure seek time performance"}, > + {0x5D3B, "Data channel impending failure spin-up retry count"}, > + {0x5D3C, "Data channel impending failure drive calibration retry " > + "count"}, > + {0x5D40, "Servo impending failure general hard drive failure"}, > + {0x5D41, "Servo impending failure drive error rate too high"}, > + {0x5D42, "Servo impending failure data error rate too high"}, > + {0x5D43, "Servo impending failure seek error rate too high"}, > + {0x5D44, "Servo impending failure too many block reassigns"}, > + {0x5D45, "Servo impending failure access times too high"}, > + {0x5D46, "Servo impending failure start unit times too high"}, > + {0x5D47, "Servo impending failure channel parametrics"}, > + {0x5D48, "Servo impending failure controller detected"}, > + {0x5D49, "Servo impending failure throughput performance"}, > + {0x5D4A, "Servo impending failure seek time performance"}, > + {0x5D4B, "Servo impending failure spin-up retry count"}, > + {0x5D4C, "Servo impending failure drive calibration retry count"}, > + {0x5D50, "Spindle impending failure general hard drive failure"}, > + {0x5D51, "Spindle impending failure drive error rate too high"}, > + {0x5D52, "Spindle impending failure data error rate too high"}, > + {0x5D53, "Spindle impending failure seek error rate too high"}, > + {0x5D54, "Spindle impending failure too many block reassigns"}, > + {0x5D55, "Spindle impending failure access times too high"}, > + {0x5D56, "Spindle impending failure start unit times too high"}, > + {0x5D57, "Spindle impending failure channel parametrics"}, > + {0x5D58, "Spindle impending failure controller detected"}, > + {0x5D59, "Spindle impending failure throughput performance"}, > + {0x5D5A, "Spindle impending failure seek time performance"}, > + {0x5D5B, "Spindle impending failure spin-up retry count"}, > + {0x5D5C, "Spindle impending failure drive calibration retry count"}, > + {0x5D60, "Firmware impending failure general hard drive failure"}, > + {0x5D61, "Firmware impending failure drive error rate too high"}, > + {0x5D62, "Firmware impending failure data error rate too high"}, > + {0x5D63, "Firmware impending failure seek error rate too high"}, > + {0x5D64, "Firmware impending failure too many block reassigns"}, > + {0x5D65, "Firmware impending failure access times too high"}, > + {0x5D66, "Firmware impending failure start unit times too high"}, > + {0x5D67, "Firmware impending failure channel parametrics"}, > + {0x5D68, "Firmware impending failure controller detected"}, > + {0x5D69, "Firmware impending failure throughput performance"}, > + {0x5D6A, "Firmware impending failure seek time performance"}, > + {0x5D6B, "Firmware impending failure spin-up retry count"}, > + {0x5D6C, "Firmware impending failure drive calibration retry count"}, > + {0x5DFF, "Failure prediction threshold exceeded (false)"}, > + > + {0x5E00, "Low power condition on"}, > + {0x5E01, "Idle condition activated by timer"}, > + {0x5E02, "Standby condition activated by timer"}, > + {0x5E03, "Idle condition activated by command"}, > + {0x5E04, "Standby condition activated by command"}, > + {0x5E05, "Idle_b condition activated by timer"}, > + {0x5E06, "Idle_b condition activated by command"}, > + {0x5E07, "Idle_c condition activated by timer"}, > + {0x5E08, "Idle_c condition activated by command"}, > + {0x5E09, "Standby_y condition activated by timer"}, > + {0x5E0A, "Standby_y condition activated by command"}, > + {0x5E41, "Power state change to active"}, > + {0x5E42, "Power state change to idle"}, > + {0x5E43, "Power state change to standby"}, > + {0x5E45, "Power state change to sleep"}, > + {0x5E47, "Power state change to device control"}, > + > + {0x6000, "Lamp failure"}, > + > + {0x6100, "Video acquisition error"}, > + {0x6101, "Unable to acquire video"}, > + {0x6102, "Out of focus"}, > + > + {0x6200, "Scan head positioning error"}, > + > + {0x6300, "End of user area encountered on this track"}, > + {0x6301, "Packet does not fit in available space"}, > + > + {0x6400, "Illegal mode for this track"}, > + {0x6401, "Invalid packet size"}, > + > + {0x6500, "Voltage fault"}, > + > + {0x6600, "Automatic document feeder cover up"}, > + {0x6601, "Automatic document feeder lift up"}, > + {0x6602, "Document jam in automatic document feeder"}, > + {0x6603, "Document miss feed automatic in document feeder"}, > + > + {0x6700, "Configuration failure"}, > + {0x6701, "Configuration of incapable logical units failed"}, > + {0x6702, "Add logical unit failed"}, > + {0x6703, "Modification of logical unit failed"}, > + {0x6704, "Exchange of logical unit failed"}, > + {0x6705, "Remove of logical unit failed"}, > + {0x6706, "Attachment of logical unit failed"}, > + {0x6707, "Creation of logical unit failed"}, > + {0x6708, "Assign failure occurred"}, > + {0x6709, "Multiply assigned logical unit"}, > + {0x670A, "Set target port groups command failed"}, > + {0x670B, "ATA device feature not enabled"}, > + > + {0x6800, "Logical unit not configured"}, > + {0x6801, "Subsidiary logical unit not configured"}, > + > + {0x6900, "Data loss on logical unit"}, > + {0x6901, "Multiple logical unit failures"}, > + {0x6902, "Parity/data mismatch"}, > + > + {0x6A00, "Informational, refer to log"}, > + > + {0x6B00, "State change has occurred"}, > + {0x6B01, "Redundancy level got better"}, > + {0x6B02, "Redundancy level got worse"}, > + {0x6C00, "Rebuild failure occurred"}, > + > + {0x6D00, "Recalculate failure occurred"}, > + > + {0x6E00, "Command to logical unit failed"}, > + > + {0x6F00, "Copy protection key exchange failure - authentication " > + "failure"}, > + {0x6F01, "Copy protection key exchange failure - key not present"}, > + {0x6F02, "Copy protection key exchange failure - key not established"}, > + {0x6F03, "Read of scrambled sector without authentication"}, > + {0x6F04, "Media region code is mismatched to logical unit region"}, > + {0x6F05, "Drive region must be permanent/region reset count error"}, > + {0x6F06, "Insufficient block count for binding nonce recording"}, > + {0x6F07, "Conflict in binding nonce recording"}, > +/* > + * {0x70NN, "Decompression exception short algorithm id of nn"}, > + */ > + {0x7100, "Decompression exception long algorithm id"}, > + > + {0x7200, "Session fixation error"}, > + {0x7201, "Session fixation error writing lead-in"}, > + {0x7202, "Session fixation error writing lead-out"}, > + {0x7203, "Session fixation error - incomplete track in session"}, > + {0x7204, "Empty or partially written reserved track"}, > + {0x7205, "No more track reservations allowed"}, > + {0x7206, "RMZ extension is not allowed"}, > + {0x7207, "No more test zone extensions are allowed"}, > + > + {0x7300, "Cd control error"}, > + {0x7301, "Power calibration area almost full"}, > + {0x7302, "Power calibration area is full"}, > + {0x7303, "Power calibration area error"}, > + {0x7304, "Program memory area update failure"}, > + {0x7305, "Program memory area is full"}, > + {0x7306, "RMA/PMA is almost full"}, > + {0x7310, "Current power calibration area almost full"}, > + {0x7311, "Current power calibration area is full"}, > + {0x7317, "RDZ is full"}, > + > + {0x7400, "Security error"}, > + {0x7401, "Unable to decrypt data"}, > + {0x7402, "Unencrypted data encountered while decrypting"}, > + {0x7403, "Incorrect data encryption key"}, > + {0x7404, "Cryptographic integrity validation failed"}, > + {0x7405, "Error decrypting data"}, > + {0x7406, "Unknown signature verification key"}, > + {0x7407, "Encryption parameters not useable"}, > + {0x7408, "Digital signature validation failure"}, > + {0x7409, "Encryption mode mismatch on read"}, > + {0x740A, "Encrypted block not raw read enabled"}, > + {0x740B, "Incorrect Encryption parameters"}, > + {0x740C, "Unable to decrypt parameter list"}, > + {0x740D, "Encryption algorithm disabled"}, > + {0x7410, "SA creation parameter value invalid"}, > + {0x7411, "SA creation parameter value rejected"}, > + {0x7412, "Invalid SA usage"}, > + {0x7421, "Data Encryption configuration prevented"}, > + {0x7430, "SA creation parameter not supported"}, > + {0x7440, "Authentication failed"}, > + {0x7461, "External data encryption key manager access error"}, > + {0x7462, "External data encryption key manager error"}, > + {0x7463, "External data encryption key not found"}, > + {0x7464, "External data encryption request not authorized"}, > + {0x746E, "External data encryption control timeout"}, > + {0x746F, "External data encryption control error"}, > + {0x7471, "Logical unit access not authorized"}, > + {0x7479, "Security conflict in translated device"}, > + > + {0, NULL} > +}; > + > +struct error_info2 { > + unsigned char code1, code2_min, code2_max; > + const char * fmt; > +}; > + > +static const struct error_info2 additional2[] = { > + {0x40, 0x00, 0x7f, "Ram failure (%x)"}, > + {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"}, > + {0x41, 0x00, 0xff, "Data path failure (%x)"}, > + {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"}, > + {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"}, > + {0x70, 0x00, 0xff, "Decompression exception short algorithm id of %x"}, > + {0, 0, 0, NULL} > +}; > + > /* description of the sense key values */ > static const char * const snstext[] = { > "No Sense", /* 0: There is no sense information */ > @@ -342,6 +1178,65 @@ scsi_sense_format_string(u8 res_code) > return res_code >= 0x72 ? "[descriptor]" : ""; > } > > +/* > + * Get additional sense code string or NULL if not available. > + * This string may contain a "%x" and should be printed with ascq as arg. > + */ > +const char * > +scsi_extd_sense_format(u8 asc, u8 ascq) { > +#ifdef CONFIG_SCSI_CONSTANTS > + int i; > + unsigned short code = ((asc << 8) | ascq); > + > + for (i = 0; additional[i].text; i++) > + if (additional[i].code12 == code) > + return additional[i].text; > + for (i = 0; additional2[i].fmt; i++) { > + if (additional2[i].code1 == asc && > + ascq >= additional2[i].code2_min && > + ascq <= additional2[i].code2_max) > + return additional2[i].fmt; > + } > +#endif > + return NULL; > +} > +EXPORT_SYMBOL(scsi_extd_sense_format); > + > +const char * > +scsi_show_extd_sense(struct trace_seq *p, u8 asc, u8 ascq) > +{ > + const char *ret = p->buffer + p->len; > + const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq); > + > + if (extd_sense_fmt) { > + if (strstr(extd_sense_fmt, "%x")) { > + char sense_buf[50]; > + > + sprintf(sense_buf, extd_sense_fmt, ascq); > + trace_seq_printf(p, " Add. Sense (%s)", sense_buf); > + } else > + trace_seq_printf(p, " Add. Sense (%s)", extd_sense_fmt); > + } else > + trace_seq_printf(p, " %sASC=0x%x %sASCQ=0x%x", > + asc >= 0x80 ? "<<vendor>> " : "", asc, > + asc < 0 && ascq >= 0x80 ? "<<vendor>> " : "", > + ascq); > + > + trace_seq_putc(p, 0); > + return ret; > +} > + > +/* > + * Print normalized SCSI sense header with a prefix. > + */ > +void > +scsi_print_sense_hdr(struct scsi_device *sdev, const char *name, > + struct scsi_sense_hdr *sshdr) > +{ > + trace_scsi_print_sense(sdev, name, sshdr, NULL, 0, 0); > +} > +EXPORT_SYMBOL(scsi_print_sense_hdr); > + > static const char * > scsi_dump_sense_buffer(struct trace_seq *p, const unsigned char *buf, int len) > { > @@ -419,6 +1314,31 @@ out: > return ret; > } > > +/* Normalize and print sense buffer with name prefix */ > +void __scsi_print_sense(struct scsi_device *sdev, const char *name, > + const unsigned char *sense_buffer, int sense_len) > +{ > + struct scsi_sense_hdr sshdr; > + int raw; > + > + raw = !scsi_normalize_sense(sense_buffer, sense_len, &sshdr); > + > + trace_scsi_print_sense(sdev, name, &sshdr, sense_buffer, sense_len, > + raw); > +} > +EXPORT_SYMBOL(__scsi_print_sense); > + > +/* Normalize and print sense buffer in SCSI command */ > +void scsi_print_sense(struct scsi_cmnd *cmd) > +{ > + const char *devname = cmd->request->rq_disk ? > + cmd->request->rq_disk->disk_name : "scsi"; > + > + __scsi_print_sense(cmd->device, devname, cmd->sense_buffer, > + SCSI_SENSE_BUFFERSIZE); > +} > +EXPORT_SYMBOL(scsi_print_sense); > + > void scsi_show_result(struct scsi_device *sdev, const char *name, int result) > { > trace_scsi_show_result(sdev, name, result); > diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h > index 68a29e4..67e6a89 100644 > --- a/include/scsi/scsi_dbg.h > +++ b/include/scsi/scsi_dbg.h > @@ -8,8 +8,6 @@ struct scsi_device; > extern void scsi_print_command(struct scsi_cmnd *); > extern void __scsi_print_command(struct scsi_device *, const char *, > unsigned char *, int); > -extern void scsi_show_extd_sense(struct scsi_device *, const char *, > - unsigned char, unsigned char); > extern void scsi_print_sense_hdr(struct scsi_device *, const char *, > struct scsi_sense_hdr *); > extern void scsi_print_sense(struct scsi_cmnd *); > diff --git a/include/trace/events/scsi.h b/include/trace/events/scsi.h > index 572aa65..6d3543f 100644 > --- a/include/trace/events/scsi.h > +++ b/include/trace/events/scsi.h > @@ -400,6 +400,9 @@ const char *scsi_trace_decode_sense_extras(struct trace_seq*, u8, u8, > #define __decode_extras(sense_key, res_code, buf, len, raw) \ > scsi_trace_decode_sense_extras(p, sense_key, res_code, buf, len, raw) > > +const char *scsi_show_extd_sense(struct trace_seq*, u8, u8); > +#define __extd_sense(asc, ascq) scsi_show_extd_sense(p, asc, ascq) > + > TRACE_EVENT(scsi_print_sense, > > TP_PROTO(struct scsi_device *sdev, const char *devname, > @@ -433,15 +436,18 @@ TRACE_EVENT(scsi_print_sense, > __entry->res_code = sshdr->response_code; > memcpy(__get_dynamic_array(sense_buffer), sense_buffer, > sense_len); > + __entry->asc = sshdr->asc; > + __entry->ascq = sshdr->ascq; > __entry->sense_len = sense_len; > __entry->raw = raw; > ), > > - TP_printk("host_no=%u channel=%u id=%u lun=%u [%s] %s", > + TP_printk("host_no=%u channel=%u id=%u lun=%u [%s] %s %s", > __entry->host_no, __entry->channel, __entry->id, __entry->lun, > __get_str(devname), __decode_extras(__entry->sense_key, > __entry->res_code, __get_dynamic_array(sense_buffer), > - __entry->sense_len, __entry->raw)) > + __entry->sense_len, __entry->raw), > + __extd_sense(__entry->asc, __entry->ascq)) > ); > #endif /* _TRACE_SCSI_H */ > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > As discussed above, please use the existing functions from constants.c here.
Cheers,
Hannes -- Dr. Hannes Reinecke zSeries & Storage hare@suse.de +49 911 74053 688 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |