lkml.org 
[lkml]   [2014]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 6/14] input: cyapa: add gen3 trackpad device basic functions support
On Thu, Jul 17, 2014 at 02:53:48PM +0800, Dudley Du wrote:
> Based on the cyapa core, add the gen3 trackpad device's basic functions
> supported, so gen3 trackpad device can work with kernel input system.
> The basic function is absolutely same as previous cyapa driver only
> support gen3 trackpad device.
> TEST=test on Chromebooks.
>
> Signed-off-by: Dudley Du <dudl@cypress.com>
> ---
> drivers/input/mouse/Makefile | 2 +-
> drivers/input/mouse/cyapa.c | 96 ++++-
> drivers/input/mouse/cyapa.h | 1 +
> drivers/input/mouse/cyapa_gen3.c | 784 ++++++++++++++++++++++++++++++++++++++
> 4 files changed, 881 insertions(+), 2 deletions(-)
> create mode 100644 drivers/input/mouse/cyapa_gen3.c
>
> diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
> index 8608eb7..63b42e0 100644
> --- a/drivers/input/mouse/Makefile
> +++ b/drivers/input/mouse/Makefile
> @@ -35,4 +35,4 @@ psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o
> psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o
> psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o
>
> -cyapatp-y := cyapa.o
> +cyapatp-y := cyapa.o cyapa_gen3.o
> diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
> index ae24b02..5c62503 100644
> --- a/drivers/input/mouse/cyapa.c
> +++ b/drivers/input/mouse/cyapa.c
> @@ -113,6 +113,15 @@ ssize_t cyapa_i2c_write(struct cyapa *cyapa, u8 reg,
>
> void cyapa_default_irq_handler(struct cyapa *cyapa)
> {
> + bool cont;
> +
> + /* Interrupt triggerred by command response in detecting. */
> + cont = true;
> + if (cyapa_gen3_ops.irq_cmd_handler)
> + cont = cyapa_gen3_ops.irq_cmd_handler(cyapa);

Why not simply

cont = cyapa->ops->irq_cmd_handler(cyapa)?


> + if (!cont)
> + return;
> +
> /*
> * Do redetecting when device states is still unknown and
> * interrupt envent is received from device.
> @@ -252,6 +261,9 @@ static int cyapa_check_is_operational(struct cyapa *cyapa)
> return ret;
>
> switch (cyapa->gen) {
> + case CYAPA_GEN3:
> + cyapa->ops = &cyapa_gen3_ops;
> + break;
> default:
> cyapa->ops = &cyapa_default_ops;
> cyapa->gen = CYAPA_GEN_UNKNOWN;
> @@ -314,9 +326,85 @@ out:
> */
> static int cyapa_get_state(struct cyapa *cyapa)
> {
> + int ret;
> + u8 status[BL_STATUS_SIZE];
> + u8 cmd[32];
> + /* The i2c address of gen4 and gen5 trackpad device must be even. */
> + bool even_addr = ((cyapa->client->addr & 0x0001) == 0);
> + bool smbus = false;
> + int retries = 2;
> +
> cyapa->state = CYAPA_STATE_NO_DEVICE;
>
> - return -ENODEV;
> + /*
> + * Get trackpad status by reading 3 registers starting from 0.
> + * If the device is in the bootloader, this will be BL_HEAD.
> + * If the device is in operation mode, this will be the DATA regs.
> + *
> + */
> + ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
> + status);
> +
> + /*
> + * On smbus systems in OP mode, the i2c_reg_read will fail with
> + * -ETIMEDOUT. In this case, try again using the smbus equivalent
> + * command. This should return a BL_HEAD indicating CYAPA_STATE_OP.
> + */
> + if (cyapa->smbus && (ret == -ETIMEDOUT || ret == -ENXIO)) {
> + if (!even_addr)
> + ret = cyapa_read_block(cyapa,
> + CYAPA_CMD_BL_STATUS, status);
> + smbus = true;
> + }
> + if (ret != BL_STATUS_SIZE)
> + goto error;
> +
> + /*
> + * Detect trackpad protocol based on characristic registers and bits.
> + */
> + do {
> + cyapa->status[REG_OP_STATUS] = status[REG_OP_STATUS];
> + cyapa->status[REG_BL_STATUS] = status[REG_BL_STATUS];
> + cyapa->status[REG_BL_ERROR] = status[REG_BL_ERROR];
> +
> + if (cyapa->gen == CYAPA_GEN_UNKNOWN ||
> + cyapa->gen == CYAPA_GEN3) {
> + ret = cyapa_gen3_ops.state_parse(cyapa,
> + status, BL_STATUS_SIZE);
> + if (ret == 0)
> + goto out_detected;
> + }
> +
> + /*
> + * Cannot detect communication protocol based on current
> + * charateristic registers and bits.
> + * So write error command to do further detection.
> + * this method only valid on I2C bus.
> + * for smbus interface, it won't have overwrite issue.
> + */
> + if (!smbus) {
> + cmd[0] = 0x00;
> + cmd[1] = 0x00;
> + ret = cyapa_i2c_write(cyapa, 0, 2, cmd);
> + if (ret)
> + goto error;
> +
> + msleep(50);
> +
> + ret = cyapa_i2c_read(cyapa, BL_HEAD_OFFSET,
> + BL_STATUS_SIZE, status);
> + if (ret < 0)
> + goto error;
> + }
> + } while (--retries > 0 && !smbus);
> +
> + goto error;
> +
> +out_detected:
> + return 0;
> +
> +error:
> + return (ret < 0) ? ret : -EAGAIN;
> }
>
> /*
> @@ -994,11 +1082,17 @@ static void cyapa_detect_and_start(void *data, async_cookie_t cookie)
>
> static int cyapa_tp_modules_init(struct cyapa *cyapa)
> {
> + if (cyapa_gen3_ops.initialize)
> + return cyapa_gen3_ops.initialize(cyapa);

Same here.

> +
> return 0;
> }
>
> static int cyapa_tp_modules_uninit(struct cyapa *cyapa)
> {
> + if (cyapa_gen3_ops.uninitialize)
> + return cyapa_gen3_ops.uninitialize(cyapa);

And here.

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2014-08-25 00:01    [W:0.046 / U:1.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site