lkml.org 
[lkml]   [2014]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp


On Wednesday 13 August 2014 09:04 PM, Gabriel FERNANDEZ wrote:
> The MiPHY28lp is a Generic PHY which can serve various SATA or PCIe
> or USB3 devices.
>
> Signed-off-by: alexandre torgue <alexandre.torgue@st.com>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
> .../devicetree/bindings/phy/phy-miphy28lp.txt | 126 +++++++++++++++++++++
> 1 file changed, 126 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
> new file mode 100644
> index 0000000..6e57bd5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
> @@ -0,0 +1,126 @@
> +STMicroelectronics STi MIPHY28LP PHY binding
> +============================================
> +
> +This binding describes a miphy device that is used to control PHY hardware
> +for SATA, PCIe or USB3.
> +
> +Required properties (controller (parent) node):
> +- compatible : Should be "st,miphy28lp-phy"
> +- st,syscfg : Should be a phandle of the system configuration register group

^^^
I think here you used space and in the rest of places used tabs.


\
 
 \ /
  Last update: 2014-08-20 17:21    [W:0.325 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site