lkml.org 
[lkml]   [2014]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH/RFC v5 05/10] DT: Add documentation for LED Class Flash Manger
Date
This patch documents LED Class Flash Manager
related bindings.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
---
.../bindings/leds/leds-flash-manager.txt | 163 ++++++++++++++++++++
1 file changed, 163 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-flash-manager.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-flash-manager.txt b/Documentation/devicetree/bindings/leds/leds-flash-manager.txt
new file mode 100644
index 0000000..d36aca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-flash-manager.txt
@@ -0,0 +1,163 @@
+* LED Flash Manager
+
+Flash manager is a part of LED Flash Class. It maintains
+all the flash led devices which have their external strobe
+signals routed through multiplexing devices.
+The multiplexers are aggregated in the standalone 'flash_muxes'
+node as subnodes which are referenced by the flash led devices.
+
+
+flash_muxes node
+----------------
+
+muxN subnode
+------------
+
+There must be at least one muxN subnode, where N is the identifier
+of the node, present in the flash_muxes node. One muxN node
+represents one multiplexer.
+
+Required properties (mutually exclusive):
+- gpios : specifies the gpio pins used to set the states
+ of mux selectors, LSB first
+- mux-async : phandle to the node of the multiplexing device
+
+
+
+flash led device node
+---------------------
+
+Following subnodes must be added to the LED Flash Class device
+tree node described in Documentation/devicetree/bindings/leds/common.txt.
+
+
+gate-software-strobe subnode
+----------------------------
+
+The node defines multiplexer settings that need to be applied if
+software strobe signal is to be routed to the flash led device.
+
+Required properties:
+- mux : phandle to the muxN node defined
+ in the flash_muxes node
+- mux-line-id : mux line identifier
+
+Optional subnodes:
+- gate-software-strobe : if there are many multiplexers to configure,
+ they can be recursively nested.
+
+
+gate-external-strobeN subnode
+-----------------------------
+
+The node defines multiplexer settings that need to be applied if
+external strobe signal is to be routed to the flash led device.
+A flash led device can have many external strobe signal sources.
+
+Required properties:
+- mux : phandle to the muxN node defined
+ in the flash_muxes node
+- mux-line-id : mux line identifier
+Optional properties:
+- strobe-provider : phandle to the device providing the
+ strobe signal. It is expected only
+ on the first level node. The referenced
+ node is expected to have 'compatible'
+ property, as providers are labelled
+ with it in the LED subsystem
+
+Optional subnodes:
+- gate-external-strobeN : if there are many multiplexers to configure,
+ they can be recursively nested.
+
+
+Example:
+
+Following board configuration is assumed in this example:
+
+ ---------- ----------
+ | FLASH1 | | FLASH2 |
+ ---------- ----------
+ \(0) /(1)
+ ----------
+ | MUX1 |
+ ----------
+ |
+ ----------
+ | MUX2 |
+ ----------
+ /(0) \(1)
+ ---------- --------------------
+ | MUX3 | | SOC FLASHEN GPIO |
+ ---------- --------------------
+ /(0) \(1)
+----------- -----------
+| SENSOR1 | | SENSOR2 |
+----------- -----------
+
+
+dummy_mux: led_mux {
+ compatible = "led-async-mux";
+};
+
+flash_muxes {
+ flash_mux1: mux1 {
+ gpios = <&gpj1 1 0>, <&gpj1 2 0>;
+ };
+
+ flash_mux2: mux2 {
+ mux-async = <&dummy_mux>;
+ };
+
+ flash_mux3: mux3 {
+ gpios = <&gpl1 1 0>, <&gpl1 2 0>;
+ };
+};
+
+max77693-flash {
+ compatible = "maxim,max77693-flash";
+
+ //other device specific properties here
+
+ gate-software-strobe {
+ mux = <&flash_mux1>;
+ mux-line-id = <0>;
+
+ gate-software-strobe {
+ mux = <&flash_mux2>;
+ mux-line-id = <1>;
+ };
+ };
+
+ gate-external-strobe1 {
+ strobe-provider = <&s5c73m3_spi>;
+ mux = <&flash_mux1>;
+ mux-line-id = <0>;
+
+ gate-external-strobe1 {
+ mux = <&flash_mux2>;
+ mux-line-id = <0>;
+
+ gate-external-strobe1 {
+ mux = <&flash_mux3>;
+ mux-line-id = <0>;
+ };
+ };
+ };
+
+ gate-external-strobe2 {
+ strobe-provider = <&s5k6a3>;
+ mux = <&flash_mux1>;
+ mux-line-id = <0>;
+
+ gate-external-strobe2 {
+ mux = <&flash_mux2>;
+ mux-line-id = <0>;
+
+ gate-external-strobe2 {
+ mux = <&flash_mux3>;
+ mux-line-id = <1>;
+ };
+ };
+ };
+};
--
1.7.9.5


\
 
 \ /
  Last update: 2014-08-20 16:21    [W:0.073 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site