lkml.org 
[lkml]   [2014]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 03/15] clk: tegra: Add closed loop support for the DFLL
On 19/08/14 07:36, Vince Hsu wrote:
> Hi,
>
> On 08/19/2014 11:33 AM, Tuomas Tynkkynen wrote:
[...]
>> + dfll_writel(td, val, DFLL_OUTPUT_CFG);
>> + dfll_wmb(td);
> Sorry that I forgot to mention this in v2's comment. Could you squash the change below in this patch? And actually it's pretty easy to misuse the dfll read/write/wmb functions. We might want to have some generic functions for these, and let the generic functions handle the offset to different register blocks.
>

Indeed, having single readl/writel and handling the different register areas there
sounds much better, I'll implement that.

[...]
> diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
> index 9b3eded6b880..71e4b256ea0d 100644
> --- a/drivers/clk/tegra/clk-dfll.c
> +++ b/drivers/clk/tegra/clk-dfll.c
> @@ -645,7 +645,7 @@ static void dfll_init_out_if(struct tegra_dfll *td)
> val = (td->lut_safe << DFLL_OUTPUT_CFG_SAFE_SHIFT) |
> (td->lut_max << DFLL_OUTPUT_CFG_MAX_SHIFT) |
> (td->lut_min << DFLL_OUTPUT_CFG_MIN_SHIFT);
> - dfll_writel(td, val, DFLL_OUTPUT_CFG);
> + dfll_i2c_writel(td, val, DFLL_OUTPUT_CFG);
> - dfll_wmb(td);
> + dfll_i2c_wmb(td);
>
> dfll_writel(td, 0, DFLL_OUTPUT_FORCE);
> @@ -1146,7 +1146,8 @@ static int attr_registers_show(struct seq_file *s, void *data)
> seq_puts(s, "CONTROL REGISTERS:\n");
> for (offs = 0; offs <= DFLL_MONITOR_DATA; offs += 4)
> seq_printf(s, "[0x%02x] = 0x%08x\n", offs,
> - dfll_readl(td, offs));
> + offs == DFLL_OUTPUT_CFG ? dfll_i2c_readl(td, offs) :
> + dfll_readl(td, offs));
>
> seq_puts(s, "\nI2C and INTR REGISTERS:\n");
> for (offs = DFLL_I2C_CFG; offs <= DFLL_I2C_STS; offs += 4)
>
>
>
> Thanks,
> Vince

--
nvpublic


\
 
 \ /
  Last update: 2014-08-19 22:21    [W:0.148 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site