lkml.org 
[lkml]   [2014]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] mmc: rtsx_usb_sdmmc: fix incorrect last byte in R2 response
From
On 15 August 2014 08:06,  <rogerable@realtek.com> wrote:
> From: Roger Tseng <rogerable@realtek.com>
>
> Current code erroneously fill the last byte of R2 response with an undefined
> value. In addition, the controller actually 'offloads' the last byte
> (CRC7, end bit) while receiving R2 response and thus it's impossible to get the
> actual value. This could cause mmc stack to obtain inconsistent CID from the
> same card after resume and misidentify it as a different card.
>
> Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2.
>
> Cc: <stable@vger.kernel.org> # v3.16+
> Fixes: c7f6558d84af ("mmc: Add realtek USB sdmmc host driver")
> Signed-off-by: Roger Tseng <rogerable@realtek.com>

Thanks! Applied for next.

Kind regards
Uffe


> ---
> drivers/mmc/host/rtsx_usb_sdmmc.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c
> index 5d3766e792f0..d9153a7d160d 100644
> --- a/drivers/mmc/host/rtsx_usb_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_usb_sdmmc.c
> @@ -435,6 +435,13 @@ static void sd_send_cmd_get_rsp(struct rtsx_usb_sdmmc *host,
> }
>
> if (rsp_type == SD_RSP_TYPE_R2) {
> + /*
> + * The controller offloads the last byte {CRC-7, end bit 1'b1}
> + * of response type R2. Assign dummy CRC, 0, and end bit to the
> + * byte(ptr[16], goes into the LSB of resp[3] later).
> + */
> + ptr[16] = 1;
> +
> for (i = 0; i < 4; i++) {
> cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4);
> dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n",
> --
> 1.7.10.4
>


\
 
 \ /
  Last update: 2014-08-18 11:41    [W:0.048 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site