Messages in this thread | | | Date | Wed, 9 Jul 2014 14:20:47 +0100 | From | Russell King - ARM Linux <> | Subject | Re: v3.16-rc4 messes up make kernelrelease with additional output |
| |
On Wed, Jul 09, 2014 at 03:15:32PM +0200, Michal Marek wrote: > On 2014-07-09 14:59, Russell King - ARM Linux wrote: > > 3.16-rc3 and all previous versions: > > > > $ make ARCH=arm CROSS_COMPILE=arm-linux- O=/tmp/build/ kernelrelease > > 3.16.0-rc3+ > > $ > > > > 3.16-rc4: > > > > $ make ARCH=arm CROSS_COMPILE=arm-linux- O=/tmp/build/ kernelrelease > > make[1]: Entering directory `/tmp/build' > > 3.16.0-rc4+ > > $ > > This is fixed by commit 066b7ed9 in linux-next, which I'll send to Linus > shortly. But you should use make -s ... kernelrelease, otherwise the > output will be polluted not only by the "Entering directory" message, > but possibly also by a silentoldconfig run.
Since my scripts run a full build before doing that, it's very unlikely that there would be a silentoldconfig run. The -s requirement isn't documented in the help - should it be?
-- FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up according to speedtest.net.
| |