lkml.org 
[lkml]   [2014]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 4/4] kvm, mem-hotplug: Update apic access page when it is migrated.
Hi Gleb,

Thanks for the advices. Please see below.

On 07/03/2014 09:55 PM, Gleb Natapov wrote:
......
>> @@ -575,6 +575,7 @@ struct kvm_arch {
>>
>> unsigned int tss_addr;
>> struct page *apic_access_page;
>> + bool apic_access_page_migrated;
> Better have two requests KVM_REQ_APIC_PAGE_MAP, KVM_REQ_APIC_PAGE_UNMAP IMO.
>

vcpu->requests is an unsigned long, and we can only has 64 requests. Isn't
adding two requests for apic page and another similar two for ept page too
many ? Not sure.

>>
>> gpa_t wall_clock;
>>
>> @@ -739,6 +740,7 @@ struct kvm_x86_ops {
>> void (*hwapic_isr_update)(struct kvm *kvm, int isr);
>> void (*load_eoi_exitmap)(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
>> void (*set_virtual_x2apic_mode)(struct kvm_vcpu *vcpu, bool set);
>> + void (*set_apic_access_page_addr)(struct kvm *kvm, hpa_t hpa);
>> void (*deliver_posted_interrupt)(struct kvm_vcpu *vcpu, int vector);
>> void (*sync_pir_to_irr)(struct kvm_vcpu *vcpu);
>> int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
>> diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
>> index c0d72f6..a655444 100644
>> --- a/arch/x86/kvm/mmu.c
>> +++ b/arch/x86/kvm/mmu.c
>> @@ -3436,6 +3436,21 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, u32 error_code,
>> kvm_make_request(KVM_REQ_MIGRATE_EPT, vcpu);
>> }
>>
>> + if (gpa == VMX_APIC_ACCESS_PAGE_ADDR&&
>> + vcpu->kvm->arch.apic_access_page_migrated) {
> Why check arch.apic_access_page_migrated here? Isn't it enough that the fault is on apic
> address.
>

True. It's enough. Followed.

>> + int i;
>> +
>> + vcpu->kvm->arch.apic_access_page_migrated = false;
>> +
>> + /*
>> + * We need update APIC_ACCESS_ADDR pointer in each VMCS of
>> + * all the online vcpus.
>> + */
>> + for (i = 0; i< atomic_read(&vcpu->kvm->online_vcpus); i++)
>> + kvm_make_request(KVM_REQ_MIGRATE_APIC,
>> + vcpu->kvm->vcpus[i]);
> make_all_cpus_request(). You need to kick all vcpus from a guest mode.
>

OK, followed. But would you please explain more about this. :)
Why need to kick all vcpus from guest mode when making request to all
vcpus ?

>> + }
>> +
>> spin_unlock(&vcpu->kvm->mmu_lock);
>>
>> return r;
>> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
>> index c336cb3..abc152f 100644
>> --- a/arch/x86/kvm/vmx.c
>> +++ b/arch/x86/kvm/vmx.c
>> @@ -3988,7 +3988,7 @@ static int alloc_apic_access_page(struct kvm *kvm)
>> if (r)
>> goto out;
>>
>> - page = gfn_to_page(kvm, VMX_APIC_ACCESS_PAGE_ADDR>> PAGE_SHIFT);
>> + page = gfn_to_page_no_pin(kvm, VMX_APIC_ACCESS_PAGE_ADDR>> PAGE_SHIFT);
>> if (is_error_page(page)) {
>> r = -EFAULT;
>> goto out;
>> @@ -7075,6 +7075,12 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
>> vmx_set_msr_bitmap(vcpu);
>> }
>>
>> +static void vmx_set_apic_access_page_addr(struct kvm *kvm, hpa_t hpa)
>> +{
>> + if (vm_need_virtualize_apic_accesses(kvm))
> This shouldn't even been called if apic access page is not supported. Nor
> mmu_notifier path neither tdp_page_fault path should ever see 0xfee00000
> address. BUG() is more appropriate here.
>

I don't quite understand. Why calling this function here will leed to bug ?
(Sorry, I'm not quite understand the internal of KVM. Please help.)

>
>> + vmcs_write64(APIC_ACCESS_ADDR, hpa);
>> +}
>> +
>> static void vmx_hwapic_isr_update(struct kvm *kvm, int isr)
>> {
>> u16 status;
>> @@ -8846,6 +8852,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
>> .enable_irq_window = enable_irq_window,
>> .update_cr8_intercept = update_cr8_intercept,
>> .set_virtual_x2apic_mode = vmx_set_virtual_x2apic_mode,
>> + .set_apic_access_page_addr = vmx_set_apic_access_page_addr,
> svm needs that too.
>

OK, will add one for svm.

>> .vm_has_apicv = vmx_vm_has_apicv,
>> .load_eoi_exitmap = vmx_load_eoi_exitmap,
>> .hwapic_irr_update = vmx_hwapic_irr_update,
>> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
>> index a26524f..14e7174 100644
>> --- a/arch/x86/kvm/x86.c
>> +++ b/arch/x86/kvm/x86.c
>> @@ -5943,6 +5943,24 @@ static void vcpu_migrated_page_update_ept(struct kvm_vcpu *vcpu)
>> }
>> }
>>
>> +static void vcpu_migrated_page_update_apic(struct kvm_vcpu *vcpu)
>> +{
>> + struct kvm *kvm = vcpu->kvm;
>> +
>> + if (kvm->arch.apic_access_page_migrated) {
>> + if (kvm->arch.apic_access_page)
>> + kvm->arch.apic_access_page = pfn_to_page(0);
> All vcpus will access apic_access_page without locking here. May be
> set kvm->arch.apic_access_page to zero in mmu_notifier and here call
> kvm_x86_ops->set_apic_access_page_addr(kvm, kvm->arch.apic_access_page);
>

I'm a little confused. apic access page's phys_addr is stored in vmcs, and
I think it will be used by vcpu directly to access the physical page.
Setting kvm->arch.apic_access_page to zero will not stop it, right ?

I'm wondering what happens when apic page is migrated, but the vmcs is
still
holding its old phys_addr before the vcpu request is handled.

>
>> + kvm_x86_ops->set_apic_access_page_addr(kvm, 0x0ull);
>> + } else {
>> + struct page *page;
>> + page = gfn_to_page_no_pin(kvm,
>> + VMX_APIC_ACCESS_PAGE_ADDR>> PAGE_SHIFT);
>> + kvm->arch.apic_access_page = page;
> Same, set it during tdp fault when page is mapped.
>
>> + kvm_x86_ops->set_apic_access_page_addr(kvm,
>> + page_to_phys(page));
>> + }
>> +}
>> +
>> /*
>> * Returns 1 to let __vcpu_run() continue the guest execution loop without
>> * exiting to the userspace. Otherwise, the value will be returned to the
>> @@ -6005,6 +6023,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
>> vcpu_scan_ioapic(vcpu);
>> if (kvm_check_request(KVM_REQ_MIGRATE_EPT, vcpu))
>> vcpu_migrated_page_update_ept(vcpu);
>> + if (kvm_check_request(KVM_REQ_MIGRATE_APIC, vcpu))
>> + vcpu_migrated_page_update_apic(vcpu);
>> }
>>
>> if (kvm_check_request(KVM_REQ_EVENT, vcpu) || req_int_win) {
>> diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
>> index 4b7e51a..e2ad65e 100644
>> --- a/include/linux/kvm_host.h
>> +++ b/include/linux/kvm_host.h
>> @@ -137,6 +137,7 @@ static inline bool is_error_page(struct page *page)
>> #define KVM_REQ_ENABLE_IBS 23
>> #define KVM_REQ_DISABLE_IBS 24
>> #define KVM_REQ_MIGRATE_EPT 25
>> +#define KVM_REQ_MIGRATE_APIC 26
>>
>> #define KVM_USERSPACE_IRQ_SOURCE_ID 0
>> #define KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID 1
>> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
>> index d271e89..f06438c 100644
>> --- a/virt/kvm/kvm_main.c
>> +++ b/virt/kvm/kvm_main.c
>> @@ -54,6 +54,7 @@
>> #include<asm/io.h>
>> #include<asm/uaccess.h>
>> #include<asm/pgtable.h>
>> +#include<asm/vmx.h>
>>
>> #include "coalesced_mmio.h"
>> #include "async_pf.h"
>> @@ -300,6 +301,20 @@ static void kvm_mmu_notifier_invalidate_page(struct mmu_notifier *mn,
>> kvm_make_request(KVM_REQ_MIGRATE_EPT, kvm->vcpus[0]);
>> }
>>
>> + if (address ==
>> + gfn_to_hva(kvm, VMX_APIC_ACCESS_PAGE_ADDR>> PAGE_SHIFT)) {
>> + int i;
>> +
>> + kvm->arch.apic_access_page_migrated = true;
>> +
>> + /*
>> + * We need update APIC_ACCESS_ADDR pointer in each VMCS of
>> + * all the online vcpus.
>> + */
>> + for (i = 0; i< atomic_read(&kvm->online_vcpus); i++)
>> + kvm_make_request(KVM_REQ_MIGRATE_APIC, kvm->vcpus[i]);
>> + }
> make_all_cpus_request()
>
> Also you need to drop put_page(kvm->arch.apic_access_page); from x86.c

Yes. Forgot it.

Thanks. :)

>> +
>> spin_unlock(&kvm->mmu_lock);
>> srcu_read_unlock(&kvm->srcu, idx);
>> }
>> --
>> 1.8.3.1
>>
>
> --
> Gleb.
> .
>


\
 
 \ /
  Last update: 2014-07-04 05:01    [W:0.116 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site