lkml.org 
[lkml]   [2014]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] ASoC: tas2552: Support TI TAS2552 Amplifier
Hi,

On Thu, Jul 03, 2014 at 09:39:53AM -0500, Dan Murphy wrote:
> +static int tas2552_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> +{
> + u8 serial_format;
> + struct snd_soc_codec *codec = dai->codec;
> +
> + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> + case SND_SOC_DAIFMT_CBS_CFS:
> + serial_format = 0x00;
> + break;
> + case SND_SOC_DAIFMT_CBS_CFM:
> + serial_format = TAS2552_WORD_CLK_MASK;
> + break;
> + case SND_SOC_DAIFMT_CBM_CFS:
> + serial_format = TAS2552_BIT_CLK_MASK;
> + break;
> + case SND_SOC_DAIFMT_CBM_CFM:
> + serial_format = (TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + pm_runtime_get_sync(codec->dev);
> +
> + snd_soc_update_bits(codec, TAS2552_SER_CTRL_1,
> + (TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK),
> + serial_format);
> +
> + pm_runtime_put(codec->dev);

I have a feeling it's better to just put at the end of the function.
Remember your pm_runtime_put() will issue i2c transfers which can take a
looooooong time ;-)

other than that, looks ok to me:

Reviewed-by: Felipe Balbi <balbi@ti.com>

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-07-03 18:21    [W:0.117 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site