lkml.org 
[lkml]   [2014]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella
Date
Hi Andreas,

>-----Original Message-----
>From: Andreas Färber [mailto:afaerber@suse.de]
>Sent: Friday, July 25, 2014 4:30 AM
>To: Michal Simek
>Cc: Andreas Olofsson; Matteo Vit; Sean Rickerd; devicetree@vger.kernel.org;
>linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Andreas
>Färber; Punnaiah Choudary Kalluri; Lars-Peter Clausen
>Subject: [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella
>
>Hello,
>
>This patch series adds an initial device tree for the Parallella board.
>UART, SD card, Ethernet are enabled.
>Not yet enabled are HDMI, QSPI flash and 2x USB.
>
>v2 adds some SPI and FPGA pieces and tidies the device tree with a
>compatible string and matching documentation.
>
>Not having all pieces for testing all of this (most notably I'm missing
>ADI ADV7513 and AXI-HDMI support for VDMA and axi-clkgen, as well as
>the 25Q128A flash chip for QSPI), I've kept new things in separate patches
>so that we can make progress on the basic version and possibly squash
>further cherry-picked pieces.
>
>Punnaiah Choudary Kalluri had recently proposed to extend the Chipidea
>USB driver for Zynq; it kept complaining about the PHY though, and I
>haven't spotted a revised version based on the generic driver yet.
>https://patchwork.kernel.org/patch/4434681/

The plan is, go with generic chip idea driver which is currently under review.
http://www.spinics.net/lists/linux-usb/msg109576.html

So, please wait some more time for extending the Chip idea driver support
to zynq.

Punnaiah
>
>My rebasing work branch is here:
>https://github.com/afaerber/linux/commits/parallella-next
>
>Regards,
>Andreas
>
>Cc: Punnaiah Choudary Kalluri <punnaia@xilinx.com> (USB)
>Cc: Lars-Peter Clausen <lars@metafoo.de> (HDMI)
>
>Andreas Färber (11):
> Documentation: devicetree: Adapteva vendor prefix
> Documentation: devicetree: Adapteva boards
> ARM: dts: zynq: Add Parallella device tree
> ARM: dts: zynq: Update deprecated xuartps clock names
> ARM: dts: zynq: Add QSPI for Parallella
> ARM: dts: zynq: Add DMAC for Parallella
> Documentation: devicetree: Fix Xilinx VDMA specification
> ARM: dts: zynq: Add VDMA to Parallella
> Documentation: devicetree: Fix ADI AXI SPDIF specification
> ARM: dts: zynq: Add SPDIF for Parallella
> ARM: dts: zynq: Add AXI clkgen for Parallella
>
> Documentation/devicetree/bindings/arm/adapteva.txt | 7 ++
> .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 2 +-
> .../devicetree/bindings/sound/adi,axi-spdif-tx.txt | 2 +-
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/arm/boot/dts/Makefile | 4 +-
> arch/arm/boot/dts/zynq-7000.dtsi | 58 +++++++++-
> arch/arm/boot/dts/zynq-parallella.dts | 119
>+++++++++++++++++++++
> 7 files changed, 188 insertions(+), 5 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/adapteva.txt
> create mode 100644 arch/arm/boot/dts/zynq-parallella.dts
>
>--
>1.9.3

\
 
 \ /
  Last update: 2014-07-25 06:42    [W:0.244 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site