lkml.org 
[lkml]   [2014]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 2/5] futex: add optimistic spinning to FUTEX_SPIN_LOCK
On 07/21/2014 01:15 PM, Davidlohr Bueso wrote:
> On Mon, 2014-07-21 at 11:24 -0400, Waiman Long wrote:
>> This patch adds code to do optimistic spinning for the FUTEX_SPIN_LOCK
>> primitive on the futex value when the lock owner is running. It is
>> the same optimistic spinning technique that is done in the mutex and
>> rw semaphore code to improve their performance especially on large
>> systems with large number of CPUs. When the lock owner is not running,
>> the spinning tasks will go to sleep.
>>
>> There is 2 major advantages of doing optimistic spinning here:
>> 1) It eliminates the context switching latency and overhead (at
>> least a few us) associated with sleeping and wakeup.
>> 2) It eliminates most of the need to call futex(2) with
>> FUTEX_SPIN_UNLOCK as spinning is done without the need to set
>> the FUTEX_WAITERS bit.
> I think this belongs with Patch 1: optimistic spinning feature should be
> in the same patch when you add the new futex commands.

I broke the spinning code out in patch 2 in order to make patch 1
smaller and easier to review.

>> Active spinning, however, does consume time in the current quantum of
>> time slice, make it a bit more likely to be preempted while running
>> in the critcal section due to time slice expiration. The heavy spinlock
>> contention of a wait-wake futex has the same effect. So it is not
>> specific
>> to this new primitive.
>>
>> With the addition of optimistic spinning, it can significantly speed
>> up the amount of mutex operations that can be done in a certain unit
>> of time. With a userspace mutex microbenchmark running 10 million
>> mutex operations with 256 threads on a 4-socket 40-core server, the
>> spinning futex can achieve a rate of about 4.9 Mops/s with a critical
>> section load of 10 pause instructions. Whereas the wait-wake futex can
>> only achieve a rate of 3.7 Mops/s. When increasing the load to 100,
>> the corresponding rates become 2.8 Mops/s and 0.8 Mops/s respectively.
>>
>> Signed-off-by: Waiman Long<Waiman.Long@hp.com>
>> ---
>> kernel/futex.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++++-----
>> 1 files changed, 172 insertions(+), 18 deletions(-)
>>
>> diff --git a/kernel/futex.c b/kernel/futex.c
>> index ec9b6ee..ddc24d1 100644
>> --- a/kernel/futex.c
>> +++ b/kernel/futex.c
>> @@ -71,6 +71,7 @@
>> #include<asm/futex.h>
>>
>> #include "locking/rtmutex_common.h"
>> +#include "locking/mcs_spinlock.h"
>>
>> /*
>> * READ this before attempting to hack on futexes!
>> @@ -2995,30 +2996,51 @@ void exit_robust_list(struct task_struct *curr)
>> #define FUTEX_TID(u) (pid_t)((u)& FUTEX_TID_MASK)
>> #define FUTEX_HAS_WAITERS(u) ((u)& FUTEX_WAITERS)
>>
>> +/*
>> + * Bit usage of the locker count:
>> + * bit 0-23: number of lockers (spinners + waiters)
>> + * bit 24-30: number of spinners
>> + */
>> +#define FUTEX_SPINCNT_MAX 64 /* Maximum # of spinners */
>> +#define FUTEX_SPINCNT_SHIFT 24
>> +#define FUTEX_SPINCNT_BIAS (1U<< FUTEX_SPINCNT_SHIFT)
>> +#define FUTEX_LOCKCNT_MASK (FUTEX_SPINCNT_BIAS - 1)
>> +#define FUTEX_LOCKCNT(qh) (atomic_read(&(qh)->lcnt)& FUTEX_LOCKCNT_MASK)
>> +#define FUTEX_SPINCNT(qh) (atomic_read(&(qh)->lcnt)>>FUTEX_SPINCNT_SHIFT)
> Both FUTEX_LOCKCNT and FUTEX_SPINCNT should be static inline functions.

I will change them into static inline functions.

>
>> /**
>> * struct futex_q_head - head of the optspin futex queue, one per unique key
>> * @hnode: list entry from the hash bucket
>> * @waitq: a list of waiting tasks
>> * @key: the key the futex is hashed on
>> + * @osq: pointer to optimisitic spinning queue
>> + * @owner: task_struct pointer of the futex owner
>> + * @otid: TID of the futex owner
>> * @wlock: spinlock for managing wait queue
>> - * @lcnt: locker count
>> + * @lcnt: locker count (spinners + waiters)
>> *
>> * Locking sequence
>> * ----------------
>> * 1) Lock hash bucket spinlock, locate the futex queue head
>> * 2) Inc lcnt (lock) or read lcnt (unlock), release hash bucket spinlock
>> - * 3) For waiter:
>> + * 3) For spinner:
>> + * - enqueue into the spinner queue and wait for its turn.
>> + * 4) For waiter:
>> * - lock futex queue head spinlock
>> * - enqueue into the wait queue
>> * - release the lock& sleep
>> - * 4) For unlocker:
>> + * 5) For unlocker:
>> * - locate the queue head just like a locker does
>> - * - Take the queue head lock and wake up the first waiter there.
>> + * - clear the owner field if it is the current owner
>> + * - if the locker count is not 0& osq is empty, take the queue head lock
>> + * and wake up the first waiter.
>> */
>> struct futex_q_head {
>> struct list_head hnode;
>> struct list_head waitq;
>> union futex_key key;
>> + struct optimistic_spin_queue *osq;
>> + struct task_struct *owner;
>> pid_t otid;
>> spinlock_t wlock;
>> atomic_t lcnt;
>> @@ -3034,6 +3056,13 @@ struct futex_q_node {
>> struct task_struct *task;
>> };
>>
>> +/*
>> + * The maximum number of tasks that can be a futex spin queue
>> + *
>> + * It is set to the lesser of half of the total number of CPUs and
>> + * FUTEX_SPINCNT_MAX to avoid locking up all the CPUs in spinning.
>> + */
>> +static int __read_mostly futex_spincnt_max;
>>
>> /*
>> * find_qhead - Find a queue head structure with the matching key
>> @@ -3061,7 +3090,7 @@ find_qhead(struct futex_hash_bucket *hb, union futex_key *key)
>> * contention with no hash bucket collision.
>> */
>> static inline struct futex_q_head *
>> -qhead_alloc_init(struct futex_hash_bucket *hb, union futex_key *key)
>> +qhead_alloc_init(struct futex_hash_bucket *hb, union futex_key *key, u32 uval)
>> {
>> struct futex_q_head *qh = NULL;
>> static const struct futex_q_head qh0 = { { 0 } };
>> @@ -3073,10 +3102,16 @@ qhead_alloc_init(struct futex_hash_bucket *hb, union futex_key *key)
>>
>> /*
>> * Initialize the queue head structure
>> + * The lock owner field may be NULL if the task has released the lock
>> + * and exit.
>> */
>> if (qh) {
>> - *qh = qh0;
>> - qh->key = *key;
>> + *qh = qh0;
>> + qh->key = *key;
>> + qh->otid = FUTEX_TID(uval);
>> + qh->owner = futex_find_get_task(qh->otid);
>> + if (unlikely(!qh->owner))
>> + qh->otid = 0;
>> atomic_set(&qh->lcnt, 1);
>> INIT_LIST_HEAD(&qh->waitq);
>> spin_lock_init(&qh->wlock);
> All this can be a single qh setup function.

This code is already in a separate allocation and initialization
function. I don't see a big advantage in further breaking them up into 2
unless there are cases where each can be called independently without
the other.

>> @@ -3120,9 +3155,11 @@ qhead_free(struct futex_q_head *qh, struct futex_hash_bucket *hb)
>> /*
>> * Free the queue head structure
>> */
>> - BUG_ON(!list_empty(&qh->waitq));
>> + BUG_ON(!list_empty(&qh->waitq) || qh->osq);
>> list_del(&qh->hnode);
>> spin_unlock(&hb->lock);
>> + if (qh->owner)
>> + put_task_struct(qh->owner);
>>
>> if (!hb->qhcache&& (cmpxchg(&hb->qhcache, NULL, qh) == NULL))
>> return;
>> @@ -3134,14 +3171,19 @@ qhead_free(struct futex_q_head *qh, struct futex_hash_bucket *hb)
>> * Return: 1 if successful or an error happen
>> * 0 otherwise
>> *
>> + * Optimistic spinning is done without holding lock, but with page fault
>> + * explicitly disabled. So different functions need to be used to access
>> + * the userspace futex value.
>> + *
>> * Side effect: The uval and ret will be updated.
>> */
>> static inline int futex_spin_trylock(u32 __user *uaddr, u32 *puval,
>> - int *pret, u32 vpid)
>> + int *pret, u32 vpid, bool spinning)
>> {
>> - u32 old;
>> + u32 old;
>>
>> - *pret = get_futex_value_locked(puval, uaddr);
>> + *pret = spinning ? __copy_from_user_inatomic(puval, uaddr, sizeof(u32))
>> + : get_futex_value_locked(puval, uaddr);
>> if (*pret)
>> return 1;
>>
>> @@ -3150,18 +3192,102 @@ static inline int futex_spin_trylock(u32 __user *uaddr, u32 *puval,
>>
>> old = *puval;
>>
>> - *pret = cmpxchg_futex_value_locked(puval, uaddr, old, vpid | old);
>> + *pret = spinning
>> + ? futex_atomic_cmpxchg_inatomic(puval, uaddr, old, vpid)
>> + : cmpxchg_futex_value_locked(puval, uaddr, old, vpid | old);
>> +
>> if (*pret)
>> return 1;
>> if (*puval == old) {
>> /* Adjust uval to reflect current value */
>> - *puval = vpid | old;
>> + *puval = spinning ? vpid : (vpid | old);
>> return 1;
>> }
>> return 0;
>> }
>>
>> /*
>> + * futex_optspin - optimistic spinning loop
>> + * Return: 1 if lock successfully acquired
>> + * 0 if need to fall back to waiting
>> + *
>> + * Page fault and preemption are disabled in the optimistic spinning
>> + * loop. Preemption should have been disabled before calling this function.
>> + *
>> + * The number of spinners may temporarily exceed the threshold due to
>> + * racing (the spin count check and add aren't atomic), but that shouldn't
>> + * be a big problem.
>> + */
>> +static inline int futex_optspin(struct futex_q_head *qh,
>> + struct futex_q_node *qn,
>> + u32 __user *uaddr,
>> + u32 vpid)
>> +{
>> + u32 uval;
>> + int ret, gotlock = false;
>> + struct task_struct *owner;
>> +
>> + /*
>> + * Increment the spinner count
>> + */
>> + atomic_add(FUTEX_SPINCNT_BIAS,&qh->lcnt);
>> + if (!osq_lock(&qh->osq)) {
>> + atomic_sub(FUTEX_SPINCNT_BIAS,&qh->lcnt);
>> + return gotlock;
>> + }
>> + pagefault_disable();
> How about a comment to why pf is disabled.

When page fault happens, there is a chance that the task can be switched
to a different CPU so all the OSQ magic fails to work even with
preempt_disable(). This is a bug that caused me a day or so to figure
out. I will add a comment to document that.

>> + for (;; cpu_relax()) {
> while(true) {
>
>> + if (futex_spin_trylock(uaddr,&uval,&ret, vpid, true)) {
>> + /*
>> + * Fall back to waiting if an error happen
>> + */
>> + if (ret)
>> + break;
>> + qh->otid = vpid;
>> + owner = xchg(&qh->owner, qn->task);
>> + get_task_struct(qn->task);
>> + if (owner)
>> + put_task_struct(owner);
>> + gotlock = true;
>> + break;
>> + } else if (unlikely(FUTEX_HAS_WAITERS(uval))) {
> Branch predictions have a time and place, please do not use
> likely/unlikely just for anything.

Sure. I may have overused them.

>
>> + /*
>> + * Try to turn off the waiter bit as it now has a
>> + * spinner. It doesn't matter if it fails as it will
>> + * try again in the next iteration.
>> + */
>> + (void)futex_atomic_cmpxchg_inatomic
>> + (&uval, uaddr, uval, uval& ~FUTEX_WAITERS);
>> + }
>> +
>> + if (unlikely(FUTEX_TID(uval) != qh->otid)) {
>> + /*
>> + * Owner has changed
>> + */
>> + qh->otid = FUTEX_TID(uval);
>> + owner = xchg(&qh->owner, futex_find_get_task(qh->otid));
>> + if (owner)
>> + put_task_struct(owner);
>> + }
>> + owner = ACCESS_ONCE(qh->owner);
>> + if ((owner&& !ACCESS_ONCE(owner->on_cpu)) || need_resched())
>> + break;
>> + }
>> + pagefault_enable();
>> + osq_unlock(&qh->osq);
>> + atomic_sub(FUTEX_SPINCNT_BIAS,&qh->lcnt);
>> +
>> + /*
>> + * If we fell out of the spin path because of need_resched(),
>> + * reschedule now.
>> + */
>> + if (!gotlock&& need_resched())
>> + schedule_preempt_disabled();
>> +
>> + return gotlock;
>> +}
>> +
>> +/*
>> * futex_spin_lock
>> */
>> static noinline int futex_spin_lock(u32 __user *uaddr, unsigned int flags)
>> @@ -3170,6 +3296,7 @@ static noinline int futex_spin_lock(u32 __user *uaddr, unsigned int flags)
>> struct futex_q_head *qh = NULL;
>> struct futex_q_node qnode;
>> union futex_key key;
>> + struct task_struct *owner;
>> bool gotlock;
>> int ret, cnt;
>> u32 uval, vpid, old;
>> @@ -3193,7 +3320,7 @@ static noinline int futex_spin_lock(u32 __user *uaddr, unsigned int flags)
>> * Check the futex value under the hash bucket lock as it might
>> * be changed.
>> */
>> - if (futex_spin_trylock(uaddr,&uval,&ret, vpid))
>> + if (futex_spin_trylock(uaddr,&uval,&ret, vpid, false))
>> goto hbunlock_out;
>>
>> if (!qh) {
>> @@ -3201,7 +3328,7 @@ static noinline int futex_spin_lock(u32 __user *uaddr, unsigned int flags)
>> * First waiter:
>> * Allocate a queue head structure& initialize it
>> */
>> - qh = qhead_alloc_init(hb,&key);
>> + qh = qhead_alloc_init(hb,&key, uval);
>> if (unlikely(!qh)) {
>> ret = -ENOMEM;
>> goto hbunlock_out;
>> @@ -3212,9 +3339,18 @@ static noinline int futex_spin_lock(u32 __user *uaddr, unsigned int flags)
>> spin_unlock(&hb->lock);
>>
>> /*
>> - * Put the task into the wait queue and sleep
>> + * Perform optimisitic spinning if the owner is running.
>> */
>> preempt_disable();
>> + owner = ACCESS_ONCE(qh->owner);
>> + if ((FUTEX_SPINCNT(qh)< futex_spincnt_max)&&
>> + (!owner || owner->on_cpu))
>> + if (futex_optspin(qh,&qnode, uaddr, vpid))
>> + goto penable_out;
>> +
>> + /*
>> + * Put the task into the wait queue and sleep
>> + */
>> get_task_struct(qnode.task);
>> spin_lock(&qh->wlock);
>> list_add_tail(&qnode.wnode,&qh->waitq);
>> @@ -3238,6 +3374,11 @@ static noinline int futex_spin_lock(u32 __user *uaddr, unsigned int flags)
>> goto dequeue;
>> } else if (uval == old) {
>> gotlock = true;
>> + qh->otid = vpid;
>> + owner = xchg(&qh->owner, qnode.task);
>> + get_task_struct(qnode.task);
>> + if (owner)
>> + put_task_struct(owner);
>> goto dequeue;
>> }
>> continue;
>> @@ -3286,15 +3427,17 @@ dequeue:
>> }
>> }
>> spin_unlock(&qh->wlock);
>> +
>> +penable_out:
>> preempt_enable();
>>
>> cnt = atomic_dec_return(&qh->lcnt);
>> if (cnt == 0)
>> qhead_free(qh, hb);
>> /*
>> - * Need to set the waiters bit there are still waiters
>> + * Need to set the waiters bit there no spinner running
>> */
>> - else if (!ret)
>> + else if (!ret&& ((cnt>> FUTEX_SPINCNT_SHIFT) == 0))
>> ret = put_user(vpid | FUTEX_WAITERS, uaddr);
>> out:
>> put_futex_key(&key);
>> @@ -3356,6 +3499,13 @@ static noinline int futex_spin_unlock(u32 __user *uaddr, unsigned int flags)
>> }
>>
>> /*
>> + * Clear the owner field
>> + */
>> + if ((qh->owner == current)&&
>> + (cmpxchg(&qh->owner, current, NULL) == current))
>> + put_task_struct(current);
>> +
>> + /*
>> * The hash bucket lock is being hold while retrieving the task
>> * structure from the queue head to make sure that the qh structure
>> * won't go away under the hood.
>> @@ -3520,6 +3670,10 @@ static int __init futex_init(void)
>>
>> futex_detect_cmpxchg();
>>
>> + futex_spincnt_max = num_possible_cpus()/2;
>> + if (futex_spincnt_max> FUTEX_SPINCNT_MAX)
>> + futex_spincnt_max = FUTEX_SPINCNT_MAX;
> This threshold needs commenting as well.
>

There is comment up where FUTEX_SPINCNT_MAX is defined. Will add a
comment here as well.

-Longman


\
 
 \ /
  Last update: 2014-07-22 21:21    [W:0.178 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site