lkml.org 
[lkml]   [2014]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown()
Hi,

Felipe Balbi wrote:
> Hi,,
>
> On Mon, Jul 21, 2014 at 10:03:07AM +0200, Lothar Waßmann wrote:
> > Hi,
> >
> > > On Fri, Jul 18, 2014 at 11:31:29AM +0200, Lothar Waßmann wrote:
> > > > This patch makes it possible to use the musb driver with HW that
> > > > requires external regulators or clocks.
> > >
> > > can you provide an example of such HW ? Are you not using the internal
> > > PHYs ?
> > >
> > The Ka-Ro electronics TX48 module uses the mmc0_clk pin as VBUSEN
> > rathern than usb0_drvvbus. This patch makes it possible to use an
> > external regulator to handle the VBUS switch through the 'vcc-supply'
> > property of the underlying generic_phy device.
>
> OK, I get it now. But why would not use usb0_drvvbus ? You could still
> route usb0_drvvbus to the regulator enable pin and the regulator would
> be enabled for you once correct values are written to the IP's mailbox.
>
> I suppose this has something to do with layout constraints ?
>
Yes. The usb0_drvvbus is used for a different purpose.


Lothar Waßmann
--
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info@karo-electronics.de
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-07-22 10:41    [W:0.086 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site