lkml.org 
[lkml]   [2014]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 5/6] usb: phy: mxs: Add VF610 USB PHY support
    On Fri, Jul 18, 2014 at 07:01:41PM +0200, Stefan Agner wrote:
    > This adds support for the USB PHY in Vybrid VF610. We assume that
    > the disconnection without VBUS is also needed for Vybrid. For all
    > other flags, the presumption of innocence applies.
    >
    > Signed-off-by: Stefan Agner <stefan@agner.ch>
    > ---
    > drivers/usb/phy/phy-mxs-usb.c | 5 +++++
    > 1 file changed, 5 insertions(+)
    >
    > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
    > index c42bdf0..207946b 100644
    > --- a/drivers/usb/phy/phy-mxs-usb.c
    > +++ b/drivers/usb/phy/phy-mxs-usb.c
    > @@ -125,10 +125,15 @@ static const struct mxs_phy_data imx6sl_phy_data = {
    > MXS_PHY_NEED_IP_FIX,
    > };
    >
    > +static const struct mxs_phy_data vf610_phy_data = {
    > + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
    > +};
    > +
    > static const struct of_device_id mxs_phy_dt_ids[] = {
    > { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
    > { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
    > { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
    > + { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },

    This new compatible string should be documented in
    Documentation/devicetree/bindings/usb/mxs-phy.txt.

    Shawn

    > { /* sentinel */ }
    > };
    > MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
    > --
    > 2.0.1
    >


    \
     
     \ /
      Last update: 2014-07-22 05:21    [W:3.038 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site