lkml.org 
[lkml]   [2014]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ASoC: tda998x: add a codec to the HDMI transmitter
On Wed, 2 Jul 2014 18:56:28 +0200
Andrew Lunn <andrew@lunn.ch> wrote:

> How well will this work with Russell concept of a front end and two
> backends? Can you uses your CODEC twice, once with the I2S backend and
> a second time with the S/PDIF backend?

Hi Andrew,

The TDA998x CODEC has two functions:
- it sets the possible formats and rates when the screen connects and
- it sets the audio input port when audio streaming starts.

I tested this CODEC with both DAPM and DPCM. If the audio subsystem
asks for streaming on both I2S and S/PDIF, only the last call is served
(this depends on the order of the DAI links in the audio card creation
table).

As I told to Russell, DPCM just asks for a 'system' DAI (front-end),
but it also asks for some additional code in the kirkwood DMA driver
because all PCMs are activated on streaming start.

--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-07-02 20:41    [W:0.089 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site